200A 30V 6000W Variable DC Power Supply

$2,317.19
6000W variable DC power supply is designed with adjustable 0-30V output voltage and 0-200A output current, offering flexibility for diverse electronic components and projects. It is switching mode with 3 digit LED display, selectable single phase 110V or 220V±10% AC input. Equipped with digital control features, this DC power supply allows users to set desired voltage and amperage levels with accuracy.
SKU: ATO-VDCPS30200K
*
Free Shipping
Delivery date: 6-12 days

200 amp 30 volt variable DC power supply features adjustable voltage and current outputs, allowing users to fine-tune settings based on specific requirements. The versatility and precision of this adjustable DC power supply make it an essential device for electronics labs, testing environments, and various technical applications, offering reliability and adaptability in powering electronic components and systems.

Specification

ModelATO-JK30200K
Input VoltageSingle Phase 110V or 220V AC (+/- 10%)
Output Voltage Range0-30V
Output Current Range0-200A
Output Power6000W
Frequency50Hz/60Hz
Adjustable ModePulse Width Modulation (PWM) Type
Transistor Connection MethodFull Bridge
Output TypeDual
Display3 digit
Display AccuracyOutput Voltage ±0.5%, Output Current ±0.5%
Efficiency>86%
Load Regulation (CV)Stable Voltage ≤0.5%, Constant Current ≤0.5%
Line Regulation (CV)Stable Voltage ≤0.5%
Ripple Voltage≤1%
Insulation ResistanceInput-Output: ≥20MΩ
Input-Chassis: ≥20MΩ
Output-Chassis:≥80MΩ
Dielectric StrengthInput-Output: AC1500V, 10mA, 1 minute
Input-Chassis: AC1500V, 10mA, 1 minute
Output-Chassis: AC1500V, 10mA, 1 minute
ProtectionOver Load and Over Voltage Protection
Current Imbalance≤5% + 0.5A
Operating Ambient-10℃ to + 45℃/ 85%RH
Storage Ambient-20℃ to + 70℃/ 80%RH
Overheat Protection Ambient Threshold70℃ to 80℃
Mean Time Between Failures≥50000h
Cooling DuctInternal Cooling Air Duct Forward and Exit
CertificationCE
Warranty12 Months
Size430 (L) x 450 (W) x 180 (H) mm
Weight26kg

Detail

Details of 200A 30V Adjustable DC Power Supply

Details of 200A 30V Variable DC Power Supply

Tips: Can a variable DC power supply deliver both positive and negative voltages?

Yes, a variable DC power supply can deliver both positive and negative voltages. It achieves this by having two output terminals, typically labeled as positive (+) and negative (-). By adjusting the voltage control knob, you can vary the output voltage within a specified range, including both positive and negative values. The ability to provide negative voltage is crucial for certain electronic components and circuits that require both polarities. This feature enables the power supply to accommodate a wide range of applications, from powering basic electronic devices to more complex circuits where the direction of voltage is essential for proper functioning. The flexibility of a variable DC power supply makes it a versatile tool in electronics laboratories and testing environments.

Product reviews
The rectifier information
5
Vered
Avatar
3/17/2025 7:16 PM
I want the rectifier ATO-VDCPS30200K for phosphoric acid anodizing process. Can its voltage be switched? Can the current be introduced gradually?
Was this review helpful? Yes No (0/0)
ATO Responded
This model only supports a single fixed voltage. The required voltage value must be selected when placing an order, and it cannot be switched later. It supports gradual increase of current through manual adjustment function.
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

200 amp 30 volt variable DC power supply features adjustable voltage and current outputs, allowing users to fine-tune settings based on specific requirements. The versatility and precision of this adjustable DC power supply make it an essential device for electronics labs, testing environments, and various technical applications, offering reliability and adaptability in powering electronic components and systems.

Specification

ModelATO-JK30200K
Input VoltageSingle Phase 110V or 220V AC (+/- 10%)
Output Voltage Range0-30V
Output Current Range0-200A
Output Power6000W
Frequency50Hz/60Hz
Adjustable ModePulse Width Modulation (PWM) Type
Transistor Connection MethodFull Bridge
Output TypeDual
Display3 digit
Display AccuracyOutput Voltage ±0.5%, Output Current ±0.5%
Efficiency>86%
Load Regulation (CV)Stable Voltage ≤0.5%, Constant Current ≤0.5%
Line Regulation (CV)Stable Voltage ≤0.5%
Ripple Voltage≤1%
Insulation ResistanceInput-Output: ≥20MΩ
Input-Chassis: ≥20MΩ
Output-Chassis:≥80MΩ
Dielectric StrengthInput-Output: AC1500V, 10mA, 1 minute
Input-Chassis: AC1500V, 10mA, 1 minute
Output-Chassis: AC1500V, 10mA, 1 minute
ProtectionOver Load and Over Voltage Protection
Current Imbalance≤5% + 0.5A
Operating Ambient-10℃ to + 45℃/ 85%RH
Storage Ambient-20℃ to + 70℃/ 80%RH
Overheat Protection Ambient Threshold70℃ to 80℃
Mean Time Between Failures≥50000h
Cooling DuctInternal Cooling Air Duct Forward and Exit
CertificationCE
Warranty12 Months
Size430 (L) x 450 (W) x 180 (H) mm
Weight26kg

Detail

Details of 200A 30V Adjustable DC Power Supply

Details of 200A 30V Variable DC Power Supply

Tips: Can a variable DC power supply deliver both positive and negative voltages?

Yes, a variable DC power supply can deliver both positive and negative voltages. It achieves this by having two output terminals, typically labeled as positive (+) and negative (-). By adjusting the voltage control knob, you can vary the output voltage within a specified range, including both positive and negative values. The ability to provide negative voltage is crucial for certain electronic components and circuits that require both polarities. This feature enables the power supply to accommodate a wide range of applications, from powering basic electronic devices to more complex circuits where the direction of voltage is essential for proper functioning. The flexibility of a variable DC power supply makes it a versatile tool in electronics laboratories and testing environments.

Product reviews
The rectifier information
5
Vered
Avatar
3/17/2025 7:16 PM
I want the rectifier ATO-VDCPS30200K for phosphoric acid anodizing process. Can its voltage be switched? Can the current be introduced gradually?
Was this review helpful? Yes No (0/0)
ATO Responded
This model only supports a single fixed voltage. The required voltage value must be selected when placing an order, and it cannot be switched later. It supports gradual increase of current through manual adjustment function.
Only registered users can write reviews