Three phase 380 volt to 220/200 volt step down autotransformer, 100 kVA power rating, primary and secondary windings are separated by aluminium/copper shield, input and output voltage supports customization service, long use life span and high efficiency.
Applications: The 3-phase autotransformer can be used in CNC production equipment, SMT, printing machines, electrical discharge machines, automatic plug-in machines, precision measuring equipment, laser cutting machines, plastic molding machines, medical monitoring systems, PCB drilling machines, laboratory equipment, military use Instrumentation control center, etc.
Specification
| Model | ATO-ASG100KVA |
| Phase | 3-Phase |
| Capacity | 100 kVA |
| Input Voltage | AC 380V |
| Input Current | 151A |
| Output Voltage (Optional) | AC 220V, 200V |
| Output Current | 262A (220V), 289A (200V) |
| Frequency | 50Hz / 60Hz |
| Winding Material (Optional) | Aluminum Wire, Copper Wire |
| Cooling Method | Self-Cooling or Wind-Cooling |
| Working Efficiency | ≥98% |
| Protection Grade | IP21 |
| Waveform Distortion | No distortion (compared with output wave) |
| Insulation Resistance | ≥ 150MΩ |
| Wiring | Yn0 |
| Electrical Strength | Power frequency sinusoidal voltage 3000V lasts for 1 minute, no breakdown and flicker |
| Overload Protection | Can withstand instantaneous 2 times the rated current |
| Moisture-Proof Type (Optional) | Open type, sealed type |
| Ambient Temperature | -20℃ ~ +45℃ |
| Altitude | ≤ 2500m |
| Relative Humidity | 0-95% |
| Noise | ≤35dB (within 1 meter) |
| Design Service Life | 20 years |
| Use Environment | No explosion, rain and snow corrosion place, and no gas and conductive dust in the medium that can corrode metal and damage insulation |
| Weight (Enclosure Included) | 430 kg |
| Dimension | 650*600*900 mm |
Features
- 3-phase autotransformer has enough power, the wiring is tight and neat, and does not skip turns. Coils adopt insulated H-class enameled wire, with low no-load current and low loss.
- The 100 kVA dry-type autotransformer has built-in silicon steel sheet, which has good magnetic flux performance, high heat dissipation coefficient and low magnetic loss.
- The autotransformer uses electrophoresis technology clamps, no burrs on the edges, rounded corners to prevent collisions, and not easy to corrode.
- Tinned copper tube terminals and rail-type wiring ports are convenient for wiring and ensure that the power-on overload capacity is increased to the extreme.
Details

100 kVA 3-Phase Autotransformer Schematic Wiring Diagram

Tips: 100 kVA 3-phase autotransformer functions.
- 100 kVA 3-phase autotransformer is used in applications where primary and secondary isolation is not required. It has the advantages of small size, less consumables and high efficiency.
- Fundamentally speaking, 100 kVA 3-phase autotransformer is to save a coil and reduce costs, and it has functions of an ordinary transformer, that is, to step up or step down for the circuit voltage, isolate and reduce impedance.
- 100 kVA 3-phase autotransformer can also be made into an AC voltage regulator to flexibly change the output voltage for use in the laboratory.
- Power supply mode of 100 kVA 3-phase autotransformer is very suitable for the power supply of large-capacity loads. It has little interference to communication lines, so it is widely used by passenger dedicated lines and heavy-duty freight railways.
- In the current power grid, there is almost no autotransformation below 220 kV. 3-phase autotransformer has only been used since the 220kV voltage level, and it is mostly used as the connection between the power grids.
Product reviews
Exactly what our machine needed
Wendy
10/12/2026 7:09 PM
Our new machine was designed for a different supply voltage, so we needed a suitable transformer before putting it into operation. We selected this transformer. As expected for this capacity, it does the job we bought it for.
Was this review helpful? (0/0)
Only registered users can write reviews