10 hp (7.5 kW) DC Reactor, Single Phase

$149.72
10 hp power DC reactor for reducing harmonic interference, single phase, DC output voltage 220V, 380V, 400V is available, other voltage can be customized, DC smoothing reactor for vfd, material aluminum or copper.
SKU: ATO-DCR-10
*
*
Free Shipping
Delivery date: 6-12 days

Light weight DC line reactor in vfd, 7.5 kW power, rated current 20 amp, single phase line reactor can reduce the current ripple value, improve the input power factor, and can suppress the harmonics generated by the converter device.

Specification:

ModelATO-DCL-20
Phase1 Phase
Power Adapter7.5 kW (10 hp)
VFD Voltage Adapter2200V-1200V (Contact us for other voltages)
Rated Current20A
Inductance1.59mH
Insulation GradeF.H
Dimension96*125*110mm (L*W*H)
Mounting Dimension80*70mm
Electric StrengthIron core-winding 3000VAC/50Hz/10mA/60s no arcing no breakdown
Insulation Resistanceiron core-winding 1000VDC, Insulation resistance
≥100MV
Noise of ReactorLess than 35dB (measured from 1 meter away in horizon from reactor)
Degree of ProtectionIP00
Degree of Insulation> Class F
Weight4kg

Features
1. Improve the input current wave caused by capacitor harmonics.
2. Reduce and prevent rectifier bridge damage and capacitors.
3. Overheating due to a surge in current.
4. Improve the power factor and reduce the AC pulse of the DC bus.
5. Limit transient changes in system voltage.

10 hp DC Reactor Dimension (unit: mm)
DC reactor dimensionDetails

Single Phase DC Reactor Details

Tips: The role of DC reactor

The DC reactor is connected between the DC rectification link and the inverter link of the frequency conversion system. The main purpose is to limit the AC component superimposed on the DC current to a specified value, keep the rectified current continuous, reduce the current pulse value, and make the inverter Variable link operation is more stable and the power factor of the inverter is improved.

Product reviews
Higher energy efficiency
5
Lao
Avatar
8/16/2024 1:42 AM
Compared with the equipment I used before, I think this reactor has higher energy efficiency, significantly improved energy conversion rate, and reduced my electricity bill expenses. The material and workmanship are very solid, and after long-term use, there has been no obvious wear or failure.
Was this review helpful? Yes No (0/0)
Good quality DC reactor
5
Imanol
Avatar
7/7/2026 7:21 PM
This reactor reduced the nuisance tripping we were getting on our VFD. The input power factor improved noticeably, and the capacitor heating is significantly less. The IP00 rating is fine for our enclosed panel. A simple but effective addition to the drive system.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Light weight DC line reactor in vfd, 7.5 kW power, rated current 20 amp, single phase line reactor can reduce the current ripple value, improve the input power factor, and can suppress the harmonics generated by the converter device.

Specification:

ModelATO-DCL-20
Phase1 Phase
Power Adapter7.5 kW (10 hp)
VFD Voltage Adapter2200V-1200V (Contact us for other voltages)
Rated Current20A
Inductance1.59mH
Insulation GradeF.H
Dimension96*125*110mm (L*W*H)
Mounting Dimension80*70mm
Electric StrengthIron core-winding 3000VAC/50Hz/10mA/60s no arcing no breakdown
Insulation Resistanceiron core-winding 1000VDC, Insulation resistance
≥100MV
Noise of ReactorLess than 35dB (measured from 1 meter away in horizon from reactor)
Degree of ProtectionIP00
Degree of Insulation> Class F
Weight4kg

Features
1. Improve the input current wave caused by capacitor harmonics.
2. Reduce and prevent rectifier bridge damage and capacitors.
3. Overheating due to a surge in current.
4. Improve the power factor and reduce the AC pulse of the DC bus.
5. Limit transient changes in system voltage.

10 hp DC Reactor Dimension (unit: mm)
DC reactor dimensionDetails

Single Phase DC Reactor Details

Tips: The role of DC reactor

The DC reactor is connected between the DC rectification link and the inverter link of the frequency conversion system. The main purpose is to limit the AC component superimposed on the DC current to a specified value, keep the rectified current continuous, reduce the current pulse value, and make the inverter Variable link operation is more stable and the power factor of the inverter is improved.

Product reviews
Higher energy efficiency
5
Lao
Avatar
8/16/2024 1:42 AM
Compared with the equipment I used before, I think this reactor has higher energy efficiency, significantly improved energy conversion rate, and reduced my electricity bill expenses. The material and workmanship are very solid, and after long-term use, there has been no obvious wear or failure.
Was this review helpful? Yes No (0/0)
Good quality DC reactor
5
Imanol
Avatar
7/7/2026 7:21 PM
This reactor reduced the nuisance tripping we were getting on our VFD. The input power factor improved noticeably, and the capacitor heating is significantly less. The IP00 rating is fine for our enclosed panel. A simple but effective addition to the drive system.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews
Customers who bought this item also bought

3 hp (2.2 kW) DC Reactor, Single Phase

ATO-DCR-3
$95.79
3 hp (2.2 kW) single phase VFD reactor for sale, DC smoothing reactor in high voltage DC transmission (HVDC), rated current 10A, 220V-1200V voltage can be customized.