High temperature limit switch has roller lever R38, contact type 1NO + 1NC and rated current/voltage 5A/220VAC. It has an IP66 protection rating, is highly dust and water resistant, and can operate reliably in harsh environments such as high-temperature industrial processes and outdoor installations.
Specification
| Model | ATO-HTLS-XWKA |
| Weight | 258g |
| Radius of roller lever | 38mm |
| Rated voltage | 220VAC (Customizable rated voltage is shown in the reference table below.) |
| Rated current | 5A (Customizable rated current is shown in the reference table below.) |
| Contact type | 1NO+1NC (NC pin: 1 & 2, NO pin: 3 & 4) |
| Operating speed | 1mm/s~2m/s |
| Operating frequency | Machinery: 120 times/minute Electric: 30 times/minute |
| Contact resistance | <15MΩ, initial stage |
| Insulation resistance | >100MΩ (<500VDC) |
| Withstand voltage | Between no-connection terminals: 1000VAC, 50/60Hz lasts 1 minute Between the terminal and the contact: 2000VAC, 50/60Hz lasts 1 minute Between terminal and no-load current metal: 2200VAC, 50/60Hz lasts 1 minute |
| Vibration | Misoperation endurance: 10~55Hz, 1.5mm, double-amplitude |
| Impact | Mechanical endurance: >1000m/s2 (>100G) Misoperation endurance: >300m/s2 (>30G) |
| Shell material | Cast aluminum alloy |
| Temperature | -10~+350℃ (14~622℉) |
| Humidity | <95%RH |
| Working life | Machinery: >15million times Electric: >0.5million times |
| Protection class | IP66 |
Reference table for customizable rated voltage and rated current
| Rated voltage | Rated current (A) | |||||||
| Non-inductive load | Inductive load | |||||||
| Resistive load | Lamp load | Inductive load | Motor load | |||||
| NC | NO | NC | NO | NC | NO | NC | NO | |
| 125VAC | 10 | 3 | 1.5 | 10 | 5 | 2 | ||
| 250VAC | 5 | 2 | 1 | 5 | 3 | 1.0 | ||
| 480VAC | 3 | 1.5 | 0.8 | 3 | 1.5 | 0.8 | ||
| 600VAC | 1 | 1 | 0.5 | 1.5 | 1 | 0.5 | ||
| 8VDC | 10 | 6 | 3 | 10 | 6 | |||
| 14VDC | 10 | 6 | 3 | 10 | 6 | |||
| 30VDC | 6 | 4 | 3 | 6 | 4 | |||
| 125VDC | 0.8 | 0.2 | 0.2 | 0.8 | 0.2 | |||
| 250VDC | 0.4 | 0.1 | 0.1 | 0.4 | 0.1 | |||
Note:
- Power factor of inductive load is above 0.4 (AC). The time constant is below 7ms (DC).
- The inrush current of lamp load is 10 times that of steady state current, and the inrush current of motor load is 6 times that of steady state current.
Dimension (unit: mm)

Tips: Limit switch structure
In order to adapt to high mechanical strength and harsh environment, the limit switch is assembled and sealed in a metal or resin housing to protect the built-in micro switch from external force, water, oil, gas and dust.
- Built-in switch
The built-in switch adopts a snap-action mechanism. Operating plunger withstanding external force or action, the movable contact is moved from the lower normally closed (NC) contact to the upper normally open (NO) contact. A contact type that does not have a common (COM) pin and has a set of NO pins (a contact) and NC pins (b contact) is called a 1a1b contact type. General limit switches are used in this way. In addition, there is a 1c contact type limit switch composed of three pins of NO, NC and COM, which can be connected to the pins of the built-in switch with external connection wires directly. - Switch box
Used to enclose and protect built-in switches, made of metal or resin with excellent mechanical strength. There is a conduit port in the lower part of the switch box for installing a special connector. It is used to fix the external connection line and seal and protect the internal mechanism. - Actuator
External force or motion is transmitted to the built-in switch via the internal plunger. The movable part connecting the external actuator and the internal mechanism is sealed with a ring or a seal, and the built-in switch is enclosed therein. Typical actuator shapes are lever type, plunger type, spring type, etc., which can be used according to different purposes. - Switch housing cover
On the pins of the built-in switch of the limit switch, after the external connection wires are laid out, the switch housing cover should be installed. Seal the chimerical part of the switch box and housing cover with a rubber seal.
Product reviews
The information you sent was good.
Estrada
12/29/2021 8:05 PM
The information you sent was good. All set, I’ve sent the info to the building owner who will actually be placing the order this spring.
Was this review helpful? (0/0)
Head rotation angle
Morian
8/18/2025 8:20 PM
Hello, can the head of this switch be rotated 90 degrees?
Was this review helpful? (0/0)
Only registered users can write reviews
Customers who bought this item also bought
High Temperature Limit Switch with Adjustable Roller Lever
ATO-HTLS-ARL
$148.15
High temperature limit switch adopts fully enclosed 1NO + 1NC contact switches, can be used in the environment temperature 350℃ (622℉). Its roller lever has the adjustable radius of 25-89mm to meet the needs of more occasions. Adjustable roller lever limit switch also has automatic reset function. The default rated current and voltage is 5A/220VAC, and other values (AC 120V/380V, DC 12V/24V/48V)can be customizable.
High Temperature Limit Switch with Roller Plunger
ATO-HTLS-RP
$148.15
There are two types of roller plunger limit switch, the roller direction of the one is parallel to the mounting surface, and the other is perpendicular to the mounting surface. Roller plunger has automatic reset function. It is also high temperature limit switch with the fully enclosed 1NO + 1NC contact switches casting from high temperature resistant material. It can be used in the environment temperature 350℃ (622℉) and without being damaged by oxidation or pollution. The default rated current and voltage is 5A/220VAC. Other values are customizable, such as 3A/480VAC, 0.8A/120VDC, etc.