This 9-axis IMU sensor combines an accelerometer, gyroscope, and magnetometer to measure acceleration, angular velocity, and magnetic field changes across three axes. It features a compact rechargeable design and supports stable operation in demanding environments.
Specification
| Model | ATO-BWT901CL (10m) / ATO-BWT901BLECL5.0 (50m) |
| Basic Parameters | |
| Communication Interface | UART, 115200 bps |
| Output Content | 3-axis acceleration, 3-axis angular velocity, 3-axis magnetic field, 3-axis angle, quaternion, port status |
| Output Rate | 0.2–200 Hz, default 10 Hz |
| Startup Time | ≤1000 ms |
| Bluetooth Cascades | Up to 4 computers via Bluetooth |
| Bluetooth Transmission Distance | Up to 50 m, open environment |
| Operating Temperature | −20 to 60°C |
| Storage Temperature | −40 to 85°C |
| Impact Resistance | Up to 20000 g |
| Electrical Parameters | |
| Charging Voltage | 5 V |
| Battery Voltage | 3.7 V |
| Working Current | 15 mA @ 10 Hz |
| Broadcast Current | 150 μA |
| Standby Current | 50 μA |
| Battery Capacity | 260 mAh |
| Working Time | 6–8 hours |
| Charging Time | 2–3 hours |
| Accelerometer Parameters | |
| Measurement Range | ±16 g |
| Resolution (±16 g) | 0.0005 g/LSB |
| RMS Noise (Bandwidth = 100 Hz) | 0.75–1 mg RMS |
| Static Zero Drift (Horizontal Placement) | ±20–40 mg |
| Temperature Drift (−40°C to +85°C) | ±0.15 mg/°C |
| Bandwidth | 5–256 Hz |
| Gyroscope Parameters | |
| Measurement Range | ±2000°/s |
| Resolution (±2000°/s) | 0.061°/s/LSB |
| RMS Noise (Bandwidth = 100 Hz) | 0.028–0.07°/s RMS |
| Static Zero Drift (Horizontal Placement) | ±0.5–1°/s |
| Temperature Drift (−40°C to +85°C) | ±0.005–0.015°/s/°C |
| Bandwidth | 5–256 Hz |
| Magnetometer Parameters | |
| Measurement Range | ±2 Gauss |
| Resolution (±2 Gauss) | 0.0667 mGauss/LSB |
| Pitch & Roll Angle Parameters | |
| Measurement Range | X: ±180°; Y: ±90° |
| Inclination Accuracy | 0.2° |
| Resolution (Horizontal Placement) | 0.0055° |
| Temperature Drift (−40°C to +85°C) | ±0.5–1° |
| Heading Angle Parameters | |
| Measurement Range | Z: ±180° |
| Heading Accuracy | 1° (9-axis algorithm, magnetic field calibration, dynamic/static, without magnetic field interference) 【1】 |
| Heading Accuracy | 0.5° (6-axis algorithm, static; dynamic integral cumulative error) 【2】 |
| Resolution (Horizontal Placement) | 0.0055° |
| Note: 【1】Please calibrate the magnetic field in the test environment before use to ensure that the sensor is familiar with the magnetic field in the environment. Please stay away from magnetic interference during calibration. 【2】In some vibration environments, there will be cumulativeerrors. The specific error cannot be estimated. Please refer to the actual test. | |
Feature
- 9-Axis Motion Sensing: This IMU sensor combines a 3-axis accelerometer, 3-axis gyroscope, and 3-axis magnetometer for comprehensive motion and orientation measurement.
- Dynamic and Static Measurement: Supports both dynamic and static modes for reliable attitude and motion monitoring in moving and stationary applications.
- High-Accuracy Heading Measurement: The wireless IMU sensor delivers heading accuracy down to 0.5° in static conditions and 1° under dynamic/static conditions when magnetic interference is absent.
- Multiple Digital Interfaces: Supports CAN, CANopen, RS232, RS485, RS422, TTL, and Modbus for flexible integration with control systems and industrial equipment.
- Adjustable Output Rate: Offers selectable output frequencies from 5 to 200Hz, allowing users to balance measurement response and data transmission requirements.
- Flexible Application Integration: This Inertial Measurement Unit (IMU) sensor suits robotics, industrial automation, navigation, motion tracking, and other orientation-sensing applications.
Size(unit: mm)

PCB Size

Detail

Direction Reference (X/Y/Z)

Tips: What Can Affect the Accuracy of a 9-Axis IMU Sensor?
Magnetic interference, incorrect installation orientation, vibration, temperature changes, and unsuitable calibration can affect measurement accuracy. Calibrate the sensor after installation and keep magnetic disturbances away from the measurement area whenever possible.
Only registered users can write reviews