7.5 hp VFD, 1-Phase 220V to 3-Phase 380V VFD

$726.89
Customizable 7.5 hp (5.5 kW) single phase VFD, single phase 220V to three phase 380V variable frequency drive for AC motor speed control. Features 13 amps, RS485 communication interface, IP20 enclosure rating.
SKU: GK3000-CS0055G
*
Free Shipping
Delivery date: 6-12 days

Cheap 7.5 hp single phase VFD, converts 1 phase 220-240v 50Hz/60Hz input to 3 phase 380v/ 400v/ 415v output, running three phase motor on single phase household power supply.

Specification:

BasicsModelGK3000-CS0055G
Capacity7.5 hp (5.5 kW)
Shipping weight8 kg
Dimension330*200*200 mm
Installation size316*188 mm
I/O FeatureRated current13 A
Input voltage1 phase 220~240V AC
Input frequency50Hz/ 60Hz
Output voltage (Optional)3 phase AC 380V/ 400V/ 415V/ 440V/ 460V (Note: 440V, 460V output voltage only for the 1-phase 240V input VFD)
Output frequency0Hz~1000Hz
Over load capacity150% of rated current for 1 minute, 180% of rated current for 3 seconds
Control FeatureControl modeV/F control;
Sensorless vector control;
CommunicationRS485
Speed regulation1:100
Start torque150% of rating torque at 1 Hz
Speed control accuracy≤±0.5% of rating synchronous speed
Frequency precisionDigital setting: max frequency x± 0.01%;
Analog setting: max frequency x± 0.2%
Frequency resolutionAnalog setting: 0.1% of max frequency;
Digital setting: 0.01Hz
Torque boostAutomatic torque boost, manual torque boost 0.1%~30.0%
Interior PID controllerBe convenient to make closed-loop system
Automatic energy save runningOptimize V/F curve automatically based on the load to realize power save running
Automatic voltage regulation (AVR)Can keep constant output voltage when power source voltage varies.
Automatic current limitingLimit running current automatically to avoid frequent over-current which will cause trip
EnvironmentEnclosure ratingIP 20
Temperature–10℃~ +40℃; VFD will be derated if ambient temperature exceed 40℃; each rise 1℃, the derate will be 5%
Humidity5%-95%, without condensation
Altitude≤1000m; VFD will be derated if above 1000m
Impingement and oscillationNormal running:<5.9m/s2 (0.6g); Transportation:<15m/s2 (1.5g)
Store environment–20℃~ +60℃; no dust, no corrosive gas, no direct sunlight

Note: ATO VFD Cannot be used as a power source, it Can only be directly connected to an induction motor to control the motor speed.

Tips: Variable frequency drive installation environment

Electrical use conditions:

To prevent electromagnetic wave interference. VFD (Frequency inverter) in the work due to rectification and frequency conversion, around a lot of interference electromagnetic waves, these high-frequency electromagnetic waves on the nearby instruments, instruments have a certain interference. Therefore, the cabinet instrumentation and electronic systems should be selected metal shell, shielding the VFD to instrumentation interference. All components should be reliably grounded, in addition to the electrical components, instruments and instruments between the connection should be selected shielded control cable, and the shielding layer should be grounded. If electromagnetic interference is not handled well, it will often make the whole system unable to work and lead to control unit malfunction or damage.

Ambient temperature:

The ambient temperature of the variable frequency drive refers to the temperature near the cross-section of the VFD. Since the VFD is mainly composed of high-power electronic equipment that is highly susceptible to temperature, the life and reliability of the VFD depends largely on the temperature, which is generally -10℃ to +40℃. In addition, need to consider the VFD's own heat dissipation and the possible extremes of the surrounding environment, for the temperature generally requires a certain amount of margin.

In this video, ATO will show you the vfd basic troubleshooting guide.

4-20mA speed control on VFD

4-20mA is as common in analog control systems as 0~10V, and ATO GK3000 series VFDs are also perfectly compatible.

Product reviews
Frequency of the vfd
5
Ledera
Avatar
5/5/2021 11:46 PM
What is the Min & Max Frequency Rage for your frequency drives?
Was this review helpful? Yes No (0/0)
ATO Responded
VFD input frequency: 50Hz/ 60Hz.
VFD output frequency (Min & Max Frequency Rage for the subjected): 0.00~400.00Hz.
How to use VFD?
5
Hender
Avatar
9/29/2021 8:26 PM
I need to power a single larger power load. Can I parallel these VFD's in order to do that?
Was this review helpful? Yes No (0/0)
ATO Responded
No, you can not parallel these VFD's.
And it's just one drive for one motor. Also, we have wide ranges of 1-phase VFDs capacities.
Can you please send me a simple way to get to the control function?
5
Beahn
Avatar
3/2/2023 12:17 AM
I received this item. Can you please send me a simple way to get to the control function so I can access how to increase the speed of the motor. Just a simple procedure as to where to navigate in the menu so I can increase the speed of the motor.
Was this review helpful? Yes No (0/0)
ATO Responded
Please refer to our video and quick setup manual.
Video: https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.youtube.com%2Fwatch%3Fv%3Ds6tTQdAVliM%26list%3DPLlo8RulDRnthBFbP4ydheukDSKw2hAfDn%26index%3D17&data=05%7C01%7C
Manual: https://www.ato.com/Content/doc/VFD-quick-setup-manual-and-application.pdf    
Please feel free to let us know if you have any further questions.
How do I run the VFD with no load?
5
Sactor
Avatar
8/11/2023 12:23 AM
I recently purchased a 7.5 hp VFD from ATO website. But now I have a question that I would like to ask you to help me answer. How do I run the VFD with no load?
Was this review helpful? Yes No (0/0)
ATO Responded
You can try to connect only the power supply of the VFD, Not the output terminal of the VFD.
7.5 hp VFD
5
calebs
Avatar
11/28/2023 7:06 PM
Is this VFD able to power a PMSM spindle with an encoder up to 800Hz?  There will be about 20' of cable between the spindle and the VFD when mounted to the gantry on my cnc. Thank you.
Was this review helpful? Yes No (0/0)
ATO Responded
We need to confirm that this spindle motor has an encoder? Because if the motor has an encoder, it is not recommended to use our VFD. The capacity of the motor is 7.5HP (5.5KW), so if the motor does not contain an encoder, we recommend using a capacity of 10HP. SKU: GK3000-CS0075G.
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Cheap 7.5 hp single phase VFD, converts 1 phase 220-240v 50Hz/60Hz input to 3 phase 380v/ 400v/ 415v output, running three phase motor on single phase household power supply.

Specification:

BasicsModelGK3000-CS0055G
Capacity7.5 hp (5.5 kW)
Shipping weight8 kg
Dimension330*200*200 mm
Installation size316*188 mm
I/O FeatureRated current13 A
Input voltage1 phase 220~240V AC
Input frequency50Hz/ 60Hz
Output voltage (Optional)3 phase AC 380V/ 400V/ 415V/ 440V/ 460V (Note: 440V, 460V output voltage only for the 1-phase 240V input VFD)
Output frequency0Hz~1000Hz
Over load capacity150% of rated current for 1 minute, 180% of rated current for 3 seconds
Control FeatureControl modeV/F control;
Sensorless vector control;
CommunicationRS485
Speed regulation1:100
Start torque150% of rating torque at 1 Hz
Speed control accuracy≤±0.5% of rating synchronous speed
Frequency precisionDigital setting: max frequency x± 0.01%;
Analog setting: max frequency x± 0.2%
Frequency resolutionAnalog setting: 0.1% of max frequency;
Digital setting: 0.01Hz
Torque boostAutomatic torque boost, manual torque boost 0.1%~30.0%
Interior PID controllerBe convenient to make closed-loop system
Automatic energy save runningOptimize V/F curve automatically based on the load to realize power save running
Automatic voltage regulation (AVR)Can keep constant output voltage when power source voltage varies.
Automatic current limitingLimit running current automatically to avoid frequent over-current which will cause trip
EnvironmentEnclosure ratingIP 20
Temperature–10℃~ +40℃; VFD will be derated if ambient temperature exceed 40℃; each rise 1℃, the derate will be 5%
Humidity5%-95%, without condensation
Altitude≤1000m; VFD will be derated if above 1000m
Impingement and oscillationNormal running:<5.9m/s2 (0.6g); Transportation:<15m/s2 (1.5g)
Store environment–20℃~ +60℃; no dust, no corrosive gas, no direct sunlight

Note: ATO VFD Cannot be used as a power source, it Can only be directly connected to an induction motor to control the motor speed.

Tips: Variable frequency drive installation environment

Electrical use conditions:

To prevent electromagnetic wave interference. VFD (Frequency inverter) in the work due to rectification and frequency conversion, around a lot of interference electromagnetic waves, these high-frequency electromagnetic waves on the nearby instruments, instruments have a certain interference. Therefore, the cabinet instrumentation and electronic systems should be selected metal shell, shielding the VFD to instrumentation interference. All components should be reliably grounded, in addition to the electrical components, instruments and instruments between the connection should be selected shielded control cable, and the shielding layer should be grounded. If electromagnetic interference is not handled well, it will often make the whole system unable to work and lead to control unit malfunction or damage.

Ambient temperature:

The ambient temperature of the variable frequency drive refers to the temperature near the cross-section of the VFD. Since the VFD is mainly composed of high-power electronic equipment that is highly susceptible to temperature, the life and reliability of the VFD depends largely on the temperature, which is generally -10℃ to +40℃. In addition, need to consider the VFD's own heat dissipation and the possible extremes of the surrounding environment, for the temperature generally requires a certain amount of margin.

Product reviews
Frequency of the vfd
5
Ledera
Avatar
5/5/2021 11:46 PM
What is the Min & Max Frequency Rage for your frequency drives?
Was this review helpful? Yes No (0/0)
ATO Responded
VFD input frequency: 50Hz/ 60Hz.
VFD output frequency (Min & Max Frequency Rage for the subjected): 0.00~400.00Hz.
How to use VFD?
5
Hender
Avatar
9/29/2021 8:26 PM
I need to power a single larger power load. Can I parallel these VFD's in order to do that?
Was this review helpful? Yes No (0/0)
ATO Responded
No, you can not parallel these VFD's.
And it's just one drive for one motor. Also, we have wide ranges of 1-phase VFDs capacities.
Can you please send me a simple way to get to the control function?
5
Beahn
Avatar
3/2/2023 12:17 AM
I received this item. Can you please send me a simple way to get to the control function so I can access how to increase the speed of the motor. Just a simple procedure as to where to navigate in the menu so I can increase the speed of the motor.
Was this review helpful? Yes No (0/0)
ATO Responded
Please refer to our video and quick setup manual.
Video: https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.youtube.com%2Fwatch%3Fv%3Ds6tTQdAVliM%26list%3DPLlo8RulDRnthBFbP4ydheukDSKw2hAfDn%26index%3D17&data=05%7C01%7C
Manual: https://www.ato.com/Content/doc/VFD-quick-setup-manual-and-application.pdf    
Please feel free to let us know if you have any further questions.
How do I run the VFD with no load?
5
Sactor
Avatar
8/11/2023 12:23 AM
I recently purchased a 7.5 hp VFD from ATO website. But now I have a question that I would like to ask you to help me answer. How do I run the VFD with no load?
Was this review helpful? Yes No (0/0)
ATO Responded
You can try to connect only the power supply of the VFD, Not the output terminal of the VFD.
7.5 hp VFD
5
calebs
Avatar
11/28/2023 7:06 PM
Is this VFD able to power a PMSM spindle with an encoder up to 800Hz?  There will be about 20' of cable between the spindle and the VFD when mounted to the gantry on my cnc. Thank you.
Was this review helpful? Yes No (0/0)
ATO Responded
We need to confirm that this spindle motor has an encoder? Because if the motor has an encoder, it is not recommended to use our VFD. The capacity of the motor is 7.5HP (5.5KW), so if the motor does not contain an encoder, we recommend using a capacity of 10HP. SKU: GK3000-CS0075G.
Only registered users can write reviews
Customers who bought this item also bought

5 hp VFD, 1-Phase 220V to 3-Phase 380V VFD

GK3000-CT0037
$473.54
Best 5 hp variable frequency drive at low price. Single phase 220 volt input to three phase 380 volt output VFD for AC motor speed control, IP20, RS485 enabled, V/F and sensorless vector control mode.