Ultrasonic anemometer for sale, for 0~40 m/s air velocity and 0-360° wind direction measurement. The wind speed and direction sensor is a gauge that uses the time difference of ultrasonic waves in the air to measure wind speed and direction. Due to the adoption of new technology, the ultrasonic anemometer has a more compact structure, a smaller size, and is easy to use and portable.
Measurement Specification
| Model | ATO-RK120-07 | |||
| Item | Range | Resolution | Accuracy | Starting Threshold |
| Wind Speed | 0-40 m/s | 0.1 m/s | ± 3% | 0.1 m/s |
| Wind Direction | 0~360° | 1° | ± 3° | 0.1 m/s |
| Extreme Wind Speed | 60 m/s | - | - | - |
System Specification
| Power Supply | DC 12-24V |
| Power Consumption | 0.2W |
| Output Signal (Optional) | 4-20mA, RS232, RS485 (Modbus/NMEA-0183), SDI-12 |
| Operating Temperature | -30℃ ~ +60℃ |
| Ingress Protection | IP65 |
| Cable Length | 4m |
| Dimension | Ф 82*108mm |
| Net Weight | 0.8 kg |
| Main Material | ASA |
Features
- Ultrasonic wind speed & direction anemometer uses a low-power chip, power consumption is only 0.2W, which is especially suitable for solar or battery-powered applications that require low power consumption.
- The ultrasonic wind speed and direction sensor has compact structure and lightweight, no moving parts, high-strength structural design, accurate and stable elements, low maintenance.
- The air velocity and direction meter adapts to complex weather conditions. The surface has preservative treatment, strong anti-interference, automatic heating anti-frozen.
- Applications include environmental monitoring, sea-going vessel, bridge & tunnel, solar and wind power generation, wind resource assessment, drilling platform, automatic weather station, agriculture, etc.
Ultrasonic Wind Speed & Direction Anemometer Dimension (Unit: mm)

Ultrasonic Wind Speed & Direction Anemometer Installation
There is rotary adjustable mounting holes at the bottom of the ultrasonic anemometer.
When installing the wind sensor, make sure the indicator on anemometer comply with the geographic north.

Tips: What is an ultrasonic wind speed & direction anemometer?
The ultrasonic wind speed & direction anemometer uses four ultrasonic probes to cyclically send and receive ultrasonic waves in a two-dimensional plane. This type of wind sensor measures wind speed and direction through the time difference of ultrasonic waves propagating in the air.
Ultrasonic wind measurement is an application of ultrasonic detection technology in gaseous media. Its working principle is that the propagation speed of ultrasonic waves in the air is affected by air flow (wind). Compared with the conventional wind cup or rotary wing anemometer, the biggest feature of ultrasonic measurement method is that the entire wind measurement system does not have any mechanical rotating parts. The ultrasonic anemometer is a non-inertial measurement, so it can accurately measure the high frequency components of the gust pulsation in the natural wind.
Could you please clarify the following?
1. Is the wind speed accuracy of ±3% based on the measured value or the full-scale range of 40 m/s? Is there an additional fixed error in m/s?
2. What are the guaranteed wind speed and wind direction errors at 0.1, 0.3, and 0.5 m/s? Does the stated ±3° wind direction accuracy apply at these low speeds?
3. Below the 0.1 m/s starting threshold, what does the sensor output? Does it indicate that the wind direction is invalid, or continue reporting the previous direction?
4. Your website lists ±3% wind speed accuracy, but the Rika manufacturer’s website lists ±5% for the RK120-07. Which specification is correct for the product you sell?
5. Does the RS485 option support Modbus RTU for reading both wind speed and direction? Could you provide the datasheet, communication manual, and data update rate?
Thank you.