Single Acting Pneumatic Cylinder, 20mm Bore, 75mm Stroke

$57.89
Pneumatic cylinder for sale, single acting pneumatic cylinder can choose 20mm x 75mm, 25mm x 75mm, 32mm x 40mm, or 40mm x 300mm (other bore size and stroke length can be customized). Material is stainless steel, small size, low cost and free shipping.
SKU: ATO-CP-MSA
*
Free Shipping
Delivery date: 6-12 days

Low price pneumatic air cylinder acting type is single acting, round body air cylinder bore size can be 20mm, 25mm, 32mm, 40mm. Stroke length 25mm, 75mm, 200mm, 350mm, 500mm are optional. Adjustable cushion, stainless steel material.

Long Stroke Pnuematic Cylinder Specifications

ModelATO-CP-MSA
Bore Size20mm, 25mm, 32mm, 40mm
Stroke25mm, 50mm, 75mm, 100mm, 200mm, 350mm, 500mm
Acting TypeSingle Acting
Working MediumAir
Max Pressure0.1-0.9 Mpa
Working Temperature-5~+70℃
Speed Range50-800 mm/s
Cushion TypeRubber Buffer
Port SizeM5 X 0.8", G 1/8"

Round Body Air Cylinder Dimension (mm)
single acting pneumatic cylinder dimension

SymbolABCDEFGHIJ
Bore/ Stroke0-5051-1000-5051-100
2013716240761012128121620126
2514116644761012130141622176
3214717244761012730141622176
40149174467610127321416.724177

Bore/ StrokeM8 x 1.25LMPQRSUVWXARAXAY
20M10 x 1.25M22 x 1.51081619122786G1/8"73329
25M10 x 1.25M22 x 1.512816191230108G1/8"73329
32M8 x 1.25M24 x 2.01210162515351210G1/8"83732
40M12 x 1.25M30 x 2.0121220251541.61614G1/8"94741

Tips: How to Choose a Round Body Air Cylinder
1. Type: Correct selection of standard cylinder type according to work requirements and conditions. Heat-resistant cylinders are required for high temperature environments. In corrosive environment, corrosion-resistant cylinders need to be selected. In harsh environments such as dust, a dust shield needs to be installed at the outstretched end of the piston rod. Requirements without pollution should be selected without oil or oil-free lubrication cylinders.
2. Installation method: To decide the installation method according to the installation location, the purpose of use and other factors. In general, fixed cylinders are used. When it is necessary to rotate continuously with the working mechanism (such as lathe, grinder, etc.), the rotary cylinder should be selected. When the piston rod is required to move in addition to linear motion, the axial pin cylinder is chosen when the arc swing is required. When there are special requirements, the corresponding special cylinder should be selected
3. The size of the force: the thrust and tension of the cylinder output force are determined according to the size of the load force. Generally according to the external load theory balance bar required cylinder force, so that the cylinder output force slightly residual. Cylinder diameter is too small, the output force is not enough, but the cylinder diameter is too large, so that the equipment is bulky, the cost increases, but also increases the gas consumption, consumes energy. In the fixture design, the expansion mechanism should be used as far as possible to reduce the shape of the cylinder.
4. Piston stroke: Related to the use of the occasion and the organization's itinerary, but generally, it does not choose full stroke, to prevent the piston and cylinder head encounter. If used for clamping mechanism, etc., the residual amount of 10~20mm should be increased according to the itinerary required for calculation.
The movement speed of the piston: mainly depends on the input compressed air flow, the size of the inlet and outlet of the rotating cylinder and the size of the inner diameter of the catheter. High speed motion is required to take a large value.

Proposition 65 Warning

*WARNING: This product can expose you to chemicals, including lead, which is known to the State of California to cause birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Product reviews
Thanks for customer service
5
Geezer
Avatar
3/31/2021 9:26 PM
Thank you very much for answering all my technical questions. I will purchase this single acting pneumatic cylinder this morning.
Was this review helpful? Yes No (0/0)
About this pneumatic cylinder…
5
Duncan
Avatar
7/27/2022 3:24 AM
What is the maximum force produced by this pneumatic cylinder?
Was this review helpful? Yes No (0/0)
ATO Responded
Its maximum thrust is 0.5Mpa, which is about 12 kg.
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Low price pneumatic air cylinder acting type is single acting, round body air cylinder bore size can be 20mm, 25mm, 32mm, 40mm. Stroke length 25mm, 75mm, 200mm, 350mm, 500mm are optional. Adjustable cushion, stainless steel material.

Long Stroke Pnuematic Cylinder Specifications

ModelATO-CP-MSA
Bore Size20mm, 25mm, 32mm, 40mm
Stroke25mm, 50mm, 75mm, 100mm, 200mm, 350mm, 500mm
Acting TypeSingle Acting
Working MediumAir
Max Pressure0.1-0.9 Mpa
Working Temperature-5~+70℃
Speed Range50-800 mm/s
Cushion TypeRubber Buffer
Port SizeM5 X 0.8", G 1/8"

Round Body Air Cylinder Dimension (mm)
single acting pneumatic cylinder dimension

SymbolABCDEFGHIJ
Bore/ Stroke0-5051-1000-5051-100
2013716240761012128121620126
2514116644761012130141622176
3214717244761012730141622176
40149174467610127321416.724177

Bore/ StrokeM8 x 1.25LMPQRSUVWXARAXAY
20M10 x 1.25M22 x 1.51081619122786G1/8"73329
25M10 x 1.25M22 x 1.512816191230108G1/8"73329
32M8 x 1.25M24 x 2.01210162515351210G1/8"83732
40M12 x 1.25M30 x 2.0121220251541.61614G1/8"94741

Tips: How to Choose a Round Body Air Cylinder
1. Type: Correct selection of standard cylinder type according to work requirements and conditions. Heat-resistant cylinders are required for high temperature environments. In corrosive environment, corrosion-resistant cylinders need to be selected. In harsh environments such as dust, a dust shield needs to be installed at the outstretched end of the piston rod. Requirements without pollution should be selected without oil or oil-free lubrication cylinders.
2. Installation method: To decide the installation method according to the installation location, the purpose of use and other factors. In general, fixed cylinders are used. When it is necessary to rotate continuously with the working mechanism (such as lathe, grinder, etc.), the rotary cylinder should be selected. When the piston rod is required to move in addition to linear motion, the axial pin cylinder is chosen when the arc swing is required. When there are special requirements, the corresponding special cylinder should be selected
3. The size of the force: the thrust and tension of the cylinder output force are determined according to the size of the load force. Generally according to the external load theory balance bar required cylinder force, so that the cylinder output force slightly residual. Cylinder diameter is too small, the output force is not enough, but the cylinder diameter is too large, so that the equipment is bulky, the cost increases, but also increases the gas consumption, consumes energy. In the fixture design, the expansion mechanism should be used as far as possible to reduce the shape of the cylinder.
4. Piston stroke: Related to the use of the occasion and the organization's itinerary, but generally, it does not choose full stroke, to prevent the piston and cylinder head encounter. If used for clamping mechanism, etc., the residual amount of 10~20mm should be increased according to the itinerary required for calculation.
The movement speed of the piston: mainly depends on the input compressed air flow, the size of the inlet and outlet of the rotating cylinder and the size of the inner diameter of the catheter. High speed motion is required to take a large value.

Product reviews
Thanks for customer service
5
Geezer
Avatar
3/31/2021 9:26 PM
Thank you very much for answering all my technical questions. I will purchase this single acting pneumatic cylinder this morning.
Was this review helpful? Yes No (0/0)
About this pneumatic cylinder…
5
Duncan
Avatar
7/27/2022 3:24 AM
What is the maximum force produced by this pneumatic cylinder?
Was this review helpful? Yes No (0/0)
ATO Responded
Its maximum thrust is 0.5Mpa, which is about 12 kg.
Only registered users can write reviews