4 Axis SCARA Robot, 700mm Arm Length, 6kg Load

$8,756.38
This is a high-speed 4 axis SCARA robot with arm length 700mm, 6kg rated load and maximum payload capacity up to 8kg. It combines with a controller and teaching box, which provides powerful integrated options to better complete your mechanical assembly, pick and place applications.
SKU: ATO-SCARA-700
Free Shipping
Delivery date: 6-12 days

700mm Arm Length, 6kg Load 4 Axis SCARA Robot provides high performance with 8kg heavy payloads while maintaining a reasonable price. It supports single phase 220V power supply, can be adapted various environment and has been improved to achieve higher speeds and reduced cycle times.

Specifications

ModelATO-TS5-700
Number of Axis4
Full length700mm
First arm400mm
Second arm300mm
Rated load6kg
Max. load8kg
Axis 4 moment of inertia0.06kg.m2
Working EnvelopeAxis 1±125°
Axis 2±142°
Axis Z210mm
Rotation±360°
Repeated Positioning AccuracyX-Y±0.02mm
Axis 3±0.02mm
Axis 4±0.02mm
Max. SpeedMax. end speed8.3m/s
Max. end acceleration66m/s2
Arm Weight (excluding electric control box, extension cord)25kg
Power SupplySingle phase AC 220±10%, 50/60Hz
Total power1.5kW
Noise<85dB
Equipped Cables15*0.2mm2
Tracheal InterfaceΦ6*2
Max. trachea inputPositive pressure8kg/cm2
Negative pressure1kg/cm2
Environmental RequirementsTemperature5℃-40℃
Humidity10%-80% (no condensation)
Installation MethodVertical mount

Note:

*Using ATO SCARA robots require more robot programming knowledge and automation equipment experience.
*You can install it yourself after buying our robot.
*If you have not used similar equipment before and need more buying guides, please feel free to contact us.

Tips: How to maintain 4 axis SCARA robot?

In order to ensure the efficient operation of the SCARA robot and the safety of the operator, please maintain the robot arm as described below. Maintenance personnel must be trained and have relevant skills. Servo motor, reducer, ball spline screw, control box maintenance, maintenance, do not disassemble yourself to avoid affecting the operation, accuracy and life of the robot arm. If there are abnormal conditions, please contact our customer service.

1. Housing cleaning

Wipe the case with a clean and soft non-woven fabric. Check the body temperature before wiping to avoid burns.

2. Spline screw lubrication

The spline screw is exposed to the open environment for a long time, it is easy to be contaminated with dust, resulting in insufficient lubrication of the screw.
When replenishing the screw rod, please run the screw rod to the bottom, disconnect the power supply of the control system, then wipe off the old grease on the screw rod, and evenly apply new grease.

3. Reducer lubrication

The grease of the reducer is completely sealed in its internal structure, and there will be no insufficient lubrication. However, the wear of the mechanical mechanism may cause abnormal noise and even poor positioning accuracy of the reducer. It is recommended to replace the grease when it reaches 8000 hours in total.

Arm Expansion Dimension (unit: mm)

SCARA robot arm expansion dimension

Motion Range Dimension (unit: mm)

Robot motion range dimension

Base Mounting Hole Dimension (unit: mm)

Robot base mounting hole dimension

Product reviews
This robot has improved our efficiency greatly.
5
Elena
Avatar
6/14/2024 1:10 AM
I recently integrated the 4 Axis SCARA Robot into our production line, and I couldn't be happier because it's been a good helper for our operations.
We used it for a complex assembly task that previously required extensive manual labor. The SCARA robot handled it with ease, completing the task quickly and accurately. Its high-speed operation significantly increased our efficiency, allowing us to meet tight deadlines without compromising on quality. I have to say that I'm grateful for this purchase.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

700mm Arm Length, 6kg Load 4 Axis SCARA Robot provides high performance with 8kg heavy payloads while maintaining a reasonable price. It supports single phase 220V power supply, can be adapted various environment and has been improved to achieve higher speeds and reduced cycle times.

Specifications

ModelATO-TS5-700
Number of Axis4
Full length700mm
First arm400mm
Second arm300mm
Rated load6kg
Max. load8kg
Axis 4 moment of inertia0.06kg.m2
Working EnvelopeAxis 1±125°
Axis 2±142°
Axis Z210mm
Rotation±360°
Repeated Positioning AccuracyX-Y±0.02mm
Axis 3±0.02mm
Axis 4±0.02mm
Max. SpeedMax. end speed8.3m/s
Max. end acceleration66m/s2
Arm Weight (excluding electric control box, extension cord)25kg
Power SupplySingle phase AC 220±10%, 50/60Hz
Total power1.5kW
Noise<85dB
Equipped Cables15*0.2mm2
Tracheal InterfaceΦ6*2
Max. trachea inputPositive pressure8kg/cm2
Negative pressure1kg/cm2
Environmental RequirementsTemperature5℃-40℃
Humidity10%-80% (no condensation)
Installation MethodVertical mount

Note:

*Using ATO SCARA robots require more robot programming knowledge and automation equipment experience.
*You can install it yourself after buying our robot.
*If you have not used similar equipment before and need more buying guides, please feel free to contact us.

Tips: How to maintain 4 axis SCARA robot?

In order to ensure the efficient operation of the SCARA robot and the safety of the operator, please maintain the robot arm as described below. Maintenance personnel must be trained and have relevant skills. Servo motor, reducer, ball spline screw, control box maintenance, maintenance, do not disassemble yourself to avoid affecting the operation, accuracy and life of the robot arm. If there are abnormal conditions, please contact our customer service.

1. Housing cleaning

Wipe the case with a clean and soft non-woven fabric. Check the body temperature before wiping to avoid burns.

2. Spline screw lubrication

The spline screw is exposed to the open environment for a long time, it is easy to be contaminated with dust, resulting in insufficient lubrication of the screw.
When replenishing the screw rod, please run the screw rod to the bottom, disconnect the power supply of the control system, then wipe off the old grease on the screw rod, and evenly apply new grease.

3. Reducer lubrication

The grease of the reducer is completely sealed in its internal structure, and there will be no insufficient lubrication. However, the wear of the mechanical mechanism may cause abnormal noise and even poor positioning accuracy of the reducer. It is recommended to replace the grease when it reaches 8000 hours in total.

Product reviews
This robot has improved our efficiency greatly.
5
Elena
Avatar
6/14/2024 1:10 AM
I recently integrated the 4 Axis SCARA Robot into our production line, and I couldn't be happier because it's been a good helper for our operations.
We used it for a complex assembly task that previously required extensive manual labor. The SCARA robot handled it with ease, completing the task quickly and accurately. Its high-speed operation significantly increased our efficiency, allowing us to meet tight deadlines without compromising on quality. I have to say that I'm grateful for this purchase.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews