RS-232/ RS-485 to RS-485 Hub, 8 Ports

$303.97
Cost-effective RS-232/ RS-485 to RS-485 hub with 8 ports, 300-115.2Kbps baud rate, asynchronous half-duplex operating mode, terminal block connector, 5000m (9600bps) transmission distance. It is widely used in highway toll system, traffic monitoring system and power system.
SKU: ATO-UT-1208
Free Shipping
Delivery date: 6-12 days

Cheap Cost-effective RS-232/ RS-485 to RS-485 hub with 8 ports, -40℃ to 85℃ operating temperature, RS-232C & RS-485 input interface.

Specification

ModelATO-UT-1208
StandardsRS-232/485 EIA/ TIA
Input interfaceRS-232C & RS-485
Output interface8 ports RS-485
Baud rate300-115.2Kbps
Transmission distance5000m (9600bps)
Operating modeAsynchronous half-duplex
ConnectorTerminal block
Dimension210mm*130mm*32mm
Operating temperature-40℃ to 85℃
Relative humidity5% to 95%
CertificatesRoHS, CE, FC
Warranty12 months

Dimension (mm/ inch)

RS232 to RS485 hub of 8 ports

Tips: The Classification of Hub
HUB can be divided into passive HUB, active HUB, smart HUB and other HUB according to the way of processing the input signal.
Passive HUB:
It is the worst type, does not do any processing to the signal, does not extend the transmission distance of the medium, and has a certain impact on the signal. Each computer connected to this HUB can receive signals from all other computers on the same HUB.
Active HUB:
The difference between an active HUB and a passive HUB is that it can amplify or regenerate the signal, so that it extends the effective transmission distance between the two hosts.
Smart HUB:
In addition to all the functions of an active HUB, the intelligent HUB also has network management and routing functions. In the smart HUB network, not every machine can receive the signal, only the computer with the same address as the signal destination address can receive it. Some smart HUBs can choose the best path by themselves, which has a good management of the network!

Product reviews
Robust and Reliable Hub with Extraordinary Performance
5
Adam
Avatar
6/19/2024 11:56 PM
I purchased the Hub for managing multiple RS-485 devices in our industrial setup, and I must say it has performed exceptionally well. Here are the key points based on my experience:
Build Quality and Design: The hub is well-built and feels durable and suitable for industrial environments. The design is straightforward with clear labeling for each port, which makes installation and maintenance hassle-free.
Functionality: The hub effectively converts RS-232 signals to RS-485 and allows communication with up to 8 RS-485 devices simultaneously. This flexibility is crucial for our operations as it simplifies the integration of various equipment without needing multiple converters.
Was this review helpful? Yes No (0/0)
Works flawlessly
5
Brian
Avatar
3/4/2026 6:23 PM
Stable transmission, The wide temperature range handles cabinet heat, and the terminal blocks hold wires securely. Easy to wire and install,very satisfied.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Cheap Cost-effective RS-232/ RS-485 to RS-485 hub with 8 ports, -40℃ to 85℃ operating temperature, RS-232C & RS-485 input interface.

Specification

ModelATO-UT-1208
StandardsRS-232/485 EIA/ TIA
Input interfaceRS-232C & RS-485
Output interface8 ports RS-485
Baud rate300-115.2Kbps
Transmission distance5000m (9600bps)
Operating modeAsynchronous half-duplex
ConnectorTerminal block
Dimension210mm*130mm*32mm
Operating temperature-40℃ to 85℃
Relative humidity5% to 95%
CertificatesRoHS, CE, FC
Warranty12 months

Dimension (mm/ inch)

RS232 to RS485 hub of 8 ports

Tips: The Classification of Hub
HUB can be divided into passive HUB, active HUB, smart HUB and other HUB according to the way of processing the input signal.
Passive HUB:
It is the worst type, does not do any processing to the signal, does not extend the transmission distance of the medium, and has a certain impact on the signal. Each computer connected to this HUB can receive signals from all other computers on the same HUB.
Active HUB:
The difference between an active HUB and a passive HUB is that it can amplify or regenerate the signal, so that it extends the effective transmission distance between the two hosts.
Smart HUB:
In addition to all the functions of an active HUB, the intelligent HUB also has network management and routing functions. In the smart HUB network, not every machine can receive the signal, only the computer with the same address as the signal destination address can receive it. Some smart HUBs can choose the best path by themselves, which has a good management of the network!

Product reviews
Robust and Reliable Hub with Extraordinary Performance
5
Adam
Avatar
6/19/2024 11:56 PM
I purchased the Hub for managing multiple RS-485 devices in our industrial setup, and I must say it has performed exceptionally well. Here are the key points based on my experience:
Build Quality and Design: The hub is well-built and feels durable and suitable for industrial environments. The design is straightforward with clear labeling for each port, which makes installation and maintenance hassle-free.
Functionality: The hub effectively converts RS-232 signals to RS-485 and allows communication with up to 8 RS-485 devices simultaneously. This flexibility is crucial for our operations as it simplifies the integration of various equipment without needing multiple converters.
Was this review helpful? Yes No (0/0)
Works flawlessly
5
Brian
Avatar
3/4/2026 6:23 PM
Stable transmission, The wide temperature range handles cabinet heat, and the terminal blocks hold wires securely. Easy to wire and install,very satisfied.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews