RS-232/ RS-485 to RS-485 Hub, 4 Ports

$199.87
RS-232/ RS-485 to RS-485 hub with 4 ports, twisted-pair or shielded cable transmission media, 0-5000m (115200-300bps) transmission distance, 300bps-115.2kbps baud rate. It is widely used in highway toll systems, road monitoring systems and power acquisition systems.
SKU: ATO-UT-5204
Free Shipping
Delivery date: 6-12 days

Factory price RS-232/ RS-485 to RS-485 hub with 4 ports. It has a transmission distance of more than 1200 meters and stable performance.

Specification

ModelATO-UT-5204
StandardsRS-232C, RS-485 EIA/ TIA
InterfaceRS-232C: 10-pin terminal block, RS-485: 10-pin terminal block
Transmission mediaTwisted-pair or shielded cable
Working modeAsynchronous half-duplex
Operating power9-30VDC/ 350mA
Baud rate300bps-115.2kbps
Protection levelRS-232 ±15KV ESD protection
Transmission distance0-5000m (115200-300bps)
Dimension120mm*80mm*25mm
Operating temperature-40℃ to 85℃
Relative humidity5% to 95%
CertificatesRoHS, CE, FC
Warranty12 months

Dimension (mm/ inch)

Dimension of RS232 to RS485 Hub of 4 Ports

Tips: Working Principle of Hub signal forwarding?

The hub works at the MAC (Medium Access Control) sublayer of the physical layer and the data link layer of the OSI/RM reference model. The physical layer defines electrical signals, symbols, line status and clock requirements, connectors for data encoding and data transmission. Because the hub only reshapes and amplifies the signal and then retransmits it without coding, it is a physical layer device.

The hub uses the CSMA/CD (carrier frame listening multiple access/conflict detection) protocol. CSMA/CD is the MAC layer protocol, so the hub also contains the content of the data link layer.
As a special multi-port repeater, the 10M hub must follow the 5-4-3 rule in the network relay expansion, that is: a network segment can only be divided into 5 sub-network segments; a network segment can only be There are 4 repeaters; a network segment can only have up to three sub-network segments containing PCs.

The working process of the hub is very simple. It can be described simply as follows: First, the node sends a signal to the line, and the hub receives the signal. Because the signal is attenuated during cable transmission, the hub will reshape and amplify the attenuated signal after receiving the signal. The hub broadcasts the amplified signal and forwards it to all other ports.

Product reviews
As explained in Specifications
5
Ethan
Avatar
10/29/2023 9:40 PM
Very good, thick cable , solid connecters.
Was this review helpful? Yes No (0/0)
Reliable RS-485 Hub
5
Adam
Avatar
5/17/2026 8:06 PM
This RS485 hub works flawlessly for our sensor network. Plugged in, auto sensed baud rate, and extended range up to 1200m with no data loss. Powered over terminal block. Compact and rock solid. Highly recommend.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Factory price RS-232/ RS-485 to RS-485 hub with 4 ports. It has a transmission distance of more than 1200 meters and stable performance.

Specification

ModelATO-UT-5204
StandardsRS-232C, RS-485 EIA/ TIA
InterfaceRS-232C: 10-pin terminal block, RS-485: 10-pin terminal block
Transmission mediaTwisted-pair or shielded cable
Working modeAsynchronous half-duplex
Operating power9-30VDC/ 350mA
Baud rate300bps-115.2kbps
Protection levelRS-232 ±15KV ESD protection
Transmission distance0-5000m (115200-300bps)
Dimension120mm*80mm*25mm
Operating temperature-40℃ to 85℃
Relative humidity5% to 95%
CertificatesRoHS, CE, FC
Warranty12 months

Dimension (mm/ inch)

Dimension of RS232 to RS485 Hub of 4 Ports

Tips: Working Principle of Hub signal forwarding?

The hub works at the MAC (Medium Access Control) sublayer of the physical layer and the data link layer of the OSI/RM reference model. The physical layer defines electrical signals, symbols, line status and clock requirements, connectors for data encoding and data transmission. Because the hub only reshapes and amplifies the signal and then retransmits it without coding, it is a physical layer device.

The hub uses the CSMA/CD (carrier frame listening multiple access/conflict detection) protocol. CSMA/CD is the MAC layer protocol, so the hub also contains the content of the data link layer.
As a special multi-port repeater, the 10M hub must follow the 5-4-3 rule in the network relay expansion, that is: a network segment can only be divided into 5 sub-network segments; a network segment can only be There are 4 repeaters; a network segment can only have up to three sub-network segments containing PCs.

The working process of the hub is very simple. It can be described simply as follows: First, the node sends a signal to the line, and the hub receives the signal. Because the signal is attenuated during cable transmission, the hub will reshape and amplify the attenuated signal after receiving the signal. The hub broadcasts the amplified signal and forwards it to all other ports.

Product reviews
As explained in Specifications
5
Ethan
Avatar
10/29/2023 9:40 PM
Very good, thick cable , solid connecters.
Was this review helpful? Yes No (0/0)
Reliable RS-485 Hub
5
Adam
Avatar
5/17/2026 8:06 PM
This RS485 hub works flawlessly for our sensor network. Plugged in, auto sensed baud rate, and extended range up to 1200m with no data loss. Powered over terminal block. Compact and rock solid. Highly recommend.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews