RS-232/ RS-485 to RS-485 Hub, 2 Ports

$165.40
RS-232/ RS-485 to RS-485 hub at affordable price, which with two ports, twisted-pair/ shielded wire transmission media, 9-30VDC/ 150mA operating power, asynchronous half-duplex working mode. It is widely used in highway toll systems, road monitoring systems and power acquisition systems.
SKU: ATO-UT-5202
Free Shipping
Delivery date: 6-12 days

Good price RS-232/ RS-485 to RS-485 hub with 2-ports, RS-232 ±15KV ESD protection, RS-485 each wire 600W lightning surge protection, 300bps-115.2kbps baud rate.

Specification

ModelATO-UT-5202
StandardsRS-232C, RS-485 EIA/ TIA
InterfaceRS-232C: 10-pin terminal block; RS-485: 10-pin terminal block
Transmission mediaTwisted-pair or shielded wire
Working modeAsynchronous half-duplex
Operating power9-30VDC/ 150mA
Isolation2500VRMS/ 500DC continuous isolated vlotage, DC/ DC module
Baud rate300bps-115.2kbps
ProtectionRS-232 ±15KV ESD protection, RS-485 each wire 600W lightning surge protection
Transmission distance0-5000m (115200-300bps)
Dimension120mm*80mm*25mm
Operating temperature-40℃ to 85℃
Relative humidity5% to 95%
CertificatesRoHS, CE, FC
Warranty12 months

Dimension (mm/ inch)

dimension-of-RS232-to-RS485-hub-of-4-ports

Tips: What is a Hub?

A hub is a device that connects multiple Ethernet twisted pairs or optical fibers together under the same physical medium. The hub is the physical layer operating in the OSI model. It can be regarded as a multi-port repeater, if it detects a collision, it will submit a blocking signal.
Since the hub will regenerate or amplify any digital signal received, and then submit it from all ports of the hub, this will cause a great chance of collision between signals, and the signal may also be eavesdropped, and this means that all connected to the hub All of the devices belong to the same collision domain name and broadcast domain name, so most hubs have been replaced by switches.

Product reviews
Works great for connecting!
5
Joe
Avatar
4/20/2022 12:39 AM
I really love these little RS-232 TO RS-485 hub. Connects every time and works like a champ. Highly recommend. I've tried a few other cost effective adaptors and this is the only one I've found that doesn't have issues with certain equipment.
Was this review helpful? Yes No (0/0)
Convenient connection
4
Robine
Avatar
10/8/2024 2:19 AM
This hub supports long-distance transmission and is suitable for use in larger industrial environments, avoiding signal attenuation issues. However, it should be noted that when connecting multiple RS-485 devices, it is recommended to check the communication parameters of each device to ensure compatibility between them and avoid potential issues.
Was this review helpful? Yes No (0/0)
Good value!
5
Jay
Avatar
9/18/2025 12:20 AM
This RS-485 hub works great for our power monitoring! Handles multiple devices easily and survives thunderstorms with great protection. Solid performance over long distances. No issues since we installed it. Good value!
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Good price RS-232/ RS-485 to RS-485 hub with 2-ports, RS-232 ±15KV ESD protection, RS-485 each wire 600W lightning surge protection, 300bps-115.2kbps baud rate.

Specification

ModelATO-UT-5202
StandardsRS-232C, RS-485 EIA/ TIA
InterfaceRS-232C: 10-pin terminal block; RS-485: 10-pin terminal block
Transmission mediaTwisted-pair or shielded wire
Working modeAsynchronous half-duplex
Operating power9-30VDC/ 150mA
Isolation2500VRMS/ 500DC continuous isolated vlotage, DC/ DC module
Baud rate300bps-115.2kbps
ProtectionRS-232 ±15KV ESD protection, RS-485 each wire 600W lightning surge protection
Transmission distance0-5000m (115200-300bps)
Dimension120mm*80mm*25mm
Operating temperature-40℃ to 85℃
Relative humidity5% to 95%
CertificatesRoHS, CE, FC
Warranty12 months

Dimension (mm/ inch)

dimension-of-RS232-to-RS485-hub-of-4-ports

Tips: What is a Hub?

A hub is a device that connects multiple Ethernet twisted pairs or optical fibers together under the same physical medium. The hub is the physical layer operating in the OSI model. It can be regarded as a multi-port repeater, if it detects a collision, it will submit a blocking signal.
Since the hub will regenerate or amplify any digital signal received, and then submit it from all ports of the hub, this will cause a great chance of collision between signals, and the signal may also be eavesdropped, and this means that all connected to the hub All of the devices belong to the same collision domain name and broadcast domain name, so most hubs have been replaced by switches.

Product reviews
Works great for connecting!
5
Joe
Avatar
4/20/2022 12:39 AM
I really love these little RS-232 TO RS-485 hub. Connects every time and works like a champ. Highly recommend. I've tried a few other cost effective adaptors and this is the only one I've found that doesn't have issues with certain equipment.
Was this review helpful? Yes No (0/0)
Convenient connection
4
Robine
Avatar
10/8/2024 2:19 AM
This hub supports long-distance transmission and is suitable for use in larger industrial environments, avoiding signal attenuation issues. However, it should be noted that when connecting multiple RS-485 devices, it is recommended to check the communication parameters of each device to ensure compatibility between them and avoid potential issues.
Was this review helpful? Yes No (0/0)
Good value!
5
Jay
Avatar
9/18/2025 12:20 AM
This RS-485 hub works great for our power monitoring! Handles multiple devices easily and survives thunderstorms with great protection. Solid performance over long distances. No issues since we installed it. Good value!
Was this review helpful? Yes No (0/0)
Only registered users can write reviews