Rotary Torque Sensor, Dual Flange, 20-5000 Nm

$2,252.98
Rotary torque sensor input and output end use flange connection, capacity range from 20 Nm, 50 Nm, 100 Nm to 5000 Nm. It is non-contact without the use of the bearing, which is suitable for high speed rotating or requiring short axial occasion.
SKU: ATO-TQS-ZJ-AF
*
*
*
*
Free Shipping
Delivery date: 30-40 Days

Rotary torque sensors have capacity range from 20Nm, 50 Nm, 100 Nm to 5000 Nm. Torque sensor capacity can be customized according to customer requirements. You can buy a signal converter with 4-20mA/ 0-5V/ 0-10V output or RS485 communications to use with ATO rotating torque sensor.

Specification

ModelATO-ZJ-AF
Rotary Torque SensorShipping Weight12~45kg
Capacity Range *0-20 Nm ~ 0-5000 Nm
Accuracy *0.2%F·S, 0.1%F·S
Power Supply *±15V ±5% DC (≥50mA), 24V DC
Output Signal *10kHz±5kHz, 4-20mA, 0-5V, 0-10V (add signal converter, with a 5m connecting cable), RS485
Speed Signal60-2000 pulse/turn
Max. Speed6000 rpm
Temperature Drift on Zero<0.1%F·S/10°C
Operating Temperature-20°C~+70°C
Humidity≤90%RH
Insulation Resistance>500MΩ
Stability0.3%F·S/year
Safety Overload150%F·S
Breaking Load200%F·S
Sensitivity1±0.2 mv/V
Power Consumption4W
Bridge VoltageDC 10V
MaterialAlloy steel
Protection ClassIP65
Electrical ConnectionCircular connector
WiringRed: V+, Blue: V-, Green: Speed output, Yellow: Torque output, Black: GND
Cable Length2m (Φ5mm), or other customizable lengths
Signal ConverterPower Supply±15V DC, 24V DC (±0.4V)
Power Supply Dissipation PowerLess than 1W
Response Time≥100mS
Conversion Accuracy±0.1%F·S
Signal InputOptoelectronic isolation. It is used with rotary torque sensor.
F/V Signal Output0-5V, 0-10V
F/I Signal Output4-20mA
Operating Temperature-20°C~+60°C
Humidity0-90%RH
Wiring±15V DC: Red: V+, Blue: V-, Green: Speed output, Yellow: Torque output, Black: GND
24V DC: Red: 24V DC, Blue: Signal-, Green: Speed output, Yellow: Torque output, Black: GND
Overall Dimension (mm)158*95*55 (L*W*H)
Istallation Dimension (mm)143*43, 4-M3


Rotary Torque Sensor Dimensions (unit:mm)

Dimensions of Flange Rotary Torque Sensor 20-5000 Nm

Capacity RangeHH1D1D2n-d1*DepthL1L2L3L4L5L6d2h
20Nm18510052666-M6*10221151354580712
50Nm18510052666-M6*10221151354580712
100Nm18510052666-M6*10221151354580712
200Nm19510552666-M8*12331251506090712
500Nm20510555708-M8*12331301606090915
1000Nm21311060808-M10*1655160200701001115
2000Nm21311060808-M10*1655160200701001115
5000Nm286150801368-M16*2555210250801201720

Rotary Torque Sensor, Dual Flange,Details

Tips: What factors affect the torque sensor output signal?

  • The device of the torque sensor should ensure that the coaxiality between the motor end and the load end is within 0.03-0.05mm. When the torque sensor works under the condition of poor coaxiality, the output data of it will be unstable. Long-term work under this condition will damage the torque sensor.
  • The field electromagnetic disturbance also has a great impact on the output signal of the torque sensor. The disturbance can be alleviated by connecting with an isolator to the power supply, or adding a magnetic ring to the cable.
  • The unstable power supply will also affect the signal output of the torque sensor. You can use a unique switching power supply for the torque sensor.
Product reviews
I have a question 20-5000Nm regarding the torque sensor
5
Stacey
Avatar
8/24/2021 3:44 AM
Will there be any changes to torque reading if I apply axial force (tension or compression) on the 20-5000Nm torque sensor?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, if you apply an axial force (tension or pressure) on the 20-5000Nm torque sensor, the torque reading will change.
Renew calibration certificate
5
Hertha
Avatar
10/21/2024 12:04 AM
The sensor we purchased last year is working well. Now, it's time for us renew calibration certificate. For the purpose, we would like to have a spare connector for external device connection. Appreciate, if you can share the plug type used for the cable.
Was this review helpful? Yes No (0/0)
ATO Responded
1. Calibration method: Press k2 5 times in a row to restore to factory settings. Because it is calibrated at the factory, the parameters are saved inside the torque sensor. Restoring the factory settings is the result after calibration.
2. Specifications of the connecting wire: 3m long, 5.3mm in diameter, M12 5-pin female plug.
Calibration Certificate
5
Phoebus
Avatar
7/22/2025 7:30 PM
Can this torque sensor be issued with a laboratory calibration certificate in accordance with ISO 17025?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, we can also provide an accredited ISO 17025 laboratory calibration certificate (similar to the one shown in the attachment) for an additional fee per piece.
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Rotary torque sensors have capacity range from 20Nm, 50 Nm, 100 Nm to 5000 Nm. Torque sensor capacity can be customized according to customer requirements. You can buy a signal converter with 4-20mA/ 0-5V/ 0-10V output or RS485 communications to use with ATO rotating torque sensor.

Specification

ModelATO-ZJ-AF
Rotary Torque SensorShipping Weight12~45kg
Capacity Range *0-20 Nm ~ 0-5000 Nm
Accuracy *0.2%F·S, 0.1%F·S
Power Supply *±15V ±5% DC (≥50mA), 24V DC
Output Signal *10kHz±5kHz, 4-20mA, 0-5V, 0-10V (add signal converter, with a 5m connecting cable), RS485
Speed Signal60-2000 pulse/turn
Max. Speed6000 rpm
Temperature Drift on Zero<0.1%F·S/10°C
Operating Temperature-20°C~+70°C
Humidity≤90%RH
Insulation Resistance>500MΩ
Stability0.3%F·S/year
Safety Overload150%F·S
Breaking Load200%F·S
Sensitivity1±0.2 mv/V
Power Consumption4W
Bridge VoltageDC 10V
MaterialAlloy steel
Protection ClassIP65
Electrical ConnectionCircular connector
WiringRed: V+, Blue: V-, Green: Speed output, Yellow: Torque output, Black: GND
Cable Length2m (Φ5mm), or other customizable lengths
Signal ConverterPower Supply±15V DC, 24V DC (±0.4V)
Power Supply Dissipation PowerLess than 1W
Response Time≥100mS
Conversion Accuracy±0.1%F·S
Signal InputOptoelectronic isolation. It is used with rotary torque sensor.
F/V Signal Output0-5V, 0-10V
F/I Signal Output4-20mA
Operating Temperature-20°C~+60°C
Humidity0-90%RH
Wiring±15V DC: Red: V+, Blue: V-, Green: Speed output, Yellow: Torque output, Black: GND
24V DC: Red: 24V DC, Blue: Signal-, Green: Speed output, Yellow: Torque output, Black: GND
Overall Dimension (mm)158*95*55 (L*W*H)
Istallation Dimension (mm)143*43, 4-M3


Rotary Torque Sensor Dimensions (unit:mm)

Dimensions of Flange Rotary Torque Sensor 20-5000 Nm

Capacity RangeHH1D1D2n-d1*DepthL1L2L3L4L5L6d2h
20Nm18510052666-M6*10221151354580712
50Nm18510052666-M6*10221151354580712
100Nm18510052666-M6*10221151354580712
200Nm19510552666-M8*12331251506090712
500Nm20510555708-M8*12331301606090915
1000Nm21311060808-M10*1655160200701001115
2000Nm21311060808-M10*1655160200701001115
5000Nm286150801368-M16*2555210250801201720

Rotary Torque Sensor, Dual Flange,Details

Tips: What factors affect the torque sensor output signal?

  • The device of the torque sensor should ensure that the coaxiality between the motor end and the load end is within 0.03-0.05mm. When the torque sensor works under the condition of poor coaxiality, the output data of it will be unstable. Long-term work under this condition will damage the torque sensor.
  • The field electromagnetic disturbance also has a great impact on the output signal of the torque sensor. The disturbance can be alleviated by connecting with an isolator to the power supply, or adding a magnetic ring to the cable.
  • The unstable power supply will also affect the signal output of the torque sensor. You can use a unique switching power supply for the torque sensor.
Product reviews
I have a question 20-5000Nm regarding the torque sensor
5
Stacey
Avatar
8/24/2021 3:44 AM
Will there be any changes to torque reading if I apply axial force (tension or compression) on the 20-5000Nm torque sensor?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, if you apply an axial force (tension or pressure) on the 20-5000Nm torque sensor, the torque reading will change.
Renew calibration certificate
5
Hertha
Avatar
10/21/2024 12:04 AM
The sensor we purchased last year is working well. Now, it's time for us renew calibration certificate. For the purpose, we would like to have a spare connector for external device connection. Appreciate, if you can share the plug type used for the cable.
Was this review helpful? Yes No (0/0)
ATO Responded
1. Calibration method: Press k2 5 times in a row to restore to factory settings. Because it is calibrated at the factory, the parameters are saved inside the torque sensor. Restoring the factory settings is the result after calibration.
2. Specifications of the connecting wire: 3m long, 5.3mm in diameter, M12 5-pin female plug.
Calibration Certificate
5
Phoebus
Avatar
7/22/2025 7:30 PM
Can this torque sensor be issued with a laboratory calibration certificate in accordance with ISO 17025?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, we can also provide an accredited ISO 17025 laboratory calibration certificate (similar to the one shown in the attachment) for an additional fee per piece.
Only registered users can write reviews