Ultrasonic radar level sensor for non-contact various slightly corrosive liquid level measurement has maximum measuring range 0-30m, can transmit and output 4-20mA, HART or RS485 signal to remote control system. It has an IP67 protection rating and is dust and water resistant, making it suitable for outdoor or humid environments.
Specification
| Model | ATO-LEVS-RD902 |
| Shipping Weight | 6.5kg |
| Measuring Range | 0-30m |
| Accuracy | ±5mm (Range 5m), ±10mm (Range 20m), ±15mm (Range 30m) |
| Resolution | 1mm |
| Display | LCD Display |
| Measured Interval | 1s (according to parameter setting) |
| Adjustment Time | 1s (according to parameter setting) |
| Microwave Frequency | 26GHz |
| Output Signal* | 4-20mA, Modbus RTU (RS485 Port), 4-20mA+HART |
| Power Supply* | DC 12-24V, AC 220V/50Hz |
| Material | Shell: Aluminum, Process Connection: 304 Stainless Steel, Horn: 304/ 316L Stainless Steel/ Tetrafluoroethylene |
| Horn Antenna Size* | Φ78mm/ Φ98mm |
| Pressure | -0.1 ~ 0.4MPa |
| Shock Resistance | 10m/s2, (10~150)Hz |
| Communication Protocol | Modbus |
| Medium | Temperature Resistant, Pressure Resistant, Slightly Corrosive Liquids |
| Storage Temperature | -40~+100℃ |
| Process connection (antenna) temperature | -40~+150℃ |
| Medium Temperature | -40~+250℃ |
| Protection Class | IP67 |
| Electrical Connection | 2 waterproof connectors M20*1.5mm, or 2 waterproof connectors 1/2" NPT |
| Installation* | G1-1/2"A thread, Flange |
| Warranty | 12 Months |
Note: * denotes optional parameters, you can select parameters in drop-down lists to finish your order. Some customizable parameters can't be selected from the lists directly, please contact customer service staff for further communication.
Dimensions (Unit: mm)

Installation

Wiring

Details

Tips: Precautions for using non-contact radar level sensors
- Avoid the feed port to avoid false reflections.
- The radar level sensor should not be installed in the center of the arched tank (otherwise the false echo received by the sensor will be enhanced), and it should not be installed very close to the tank wall. The best installation position is 1/2 of the radius of the container.
- According to the technical parameters of the sensor, set a reasonable minimum measurement distance (blind area) to avoid measurement errors caused by excessive liquid level entering the blind area.
- Although the radar sensor is non-contact, dust accumulation or crystallization may still affect signal transmission, and the antenna surface needs to be checked and cleaned regularly.
Product reviews
For grain dust
Tokenia
10/26/2026 1:35 AM
I need sensors for use in the silos of our waste dust product. This dust product is very fine and fluffy. The sensors cannot reliably read this dust. Could you recommend a configuration for this low-density product? The medium is grain dust and chaff waste.
Was this review helpful? (0/0)
Only registered users can write reviews
Customers who bought this item also bought
Magnetic Level Gauge for Fuel/Oil Tank, 4-20mA
ATO-MLG-01
$659.46
The provided 1m magnetic flap level gauge can be used for medium liquid level detection of various towers, tanks, spherical containers and boilers. Side-mounted/bottom-mounted/top-mounted magnetic level indicator with 4~20mA transmission mode, has a protection class of IP65, and an operating temperature range of -40℃ to 350℃, suitable for various environments such as low temperature to high temperature, vacuum to high pressure, etc.