12mm to 25mm shaft coupler size 56 x 56mm, single diaphragm internal clamping, low inertia, suitable for high-speed servo motors and stepping motors.
Specification
| Model | ATO-SC-GSM5645 |
| Length | 45mm |
| Width | 56mm |
| Bore | 12mm to 25mm |
| Rated Torque | 25 N.m |
| Allow Eccentricity | 0.1mm |
| Allowable Deflection Angle | 1∠° |
| Allowable Axial Deviation | ±0.36 |
| Allowable Speed | 10000 RPM |
| Static Torsional Stiffness | 2000N.m/rad |
| Moment of Inertia | 1.2 x 10-4 |
| Weight | 220g |
| Certificate | ISO9001, REACH, RoHS |
| Warranty | 12 Months |
Single Diaphragm Flexible Coupling Dimension (unit: mm)

| d1/d2 Inner Diameter Size | Φd | L | LF | S | F | M | Tightening Torque |
| 8-9-9.525-10-11-12-12.7-14-15-16-17-18-19-20-22-24-25 | 56 | 45 | 19.75 | 5.5 | 6.4 | M5 | 8 N.m |
Details

Keyway
| Shaft Diameter | Keyway Standard Machining Dimensions | Keyway Size | |||
| d1/d2 | b | t | (bXh) | ||
| Width of groove | Tolerance | Depth of groove | Tolerance | ||
| φ6~φ7.9 | 2 | ±0.0125 | 1 | ±0.10 | 2x2 |
| φ8~φ10 | 3 | 1.4 | 3x3 | ||
| φ10.1~φ12 | 4 | ±0.0150 | 1.8 | 4x4 | |
| φ12.1~φ17 | 5 | 2.3 | 5x5 | ||
| φ17.1~φ22 | 6 | 2.8 | 6x6 | ||
| φ22.1~φ30 | 8 | ±0.0180 | 3.3 | ±0.20 | 8x7 |
| φ30.1~φ38 | 10 | 3.3 | 10x8 | ||
| φ38.1~φ44 | 12 | ±0.0215 | 3.3 | 12x8 | |
| φ44.1~φ50 | 14 | 3.8 | 14x9 | ||
| φ50.1~Ф58 | 16 | 4.3 | 16x10 | ||
| φ58.1~φ65 | 18 | 4.4 | 18x11 | ||
Keyway Machining Standard Drawing

Tips: Diaphragm coupling advantages
The diaphragm coupling has a simple structure and high reliability. It is suitable for high-speed, high-power, high-temperature and corrosive environments. It has great axial and angular compensation, good anti-misalignment, and has vibration absorption and vibration isolation functions. The coupling has no noise, zero clearance, constant speed, no need for lubrication. The additional load acting on the connected equipment is small, and the diaphragm coupling is easy to install, use and maintain.
Only registered users can write reviews
Customers who bought this item also bought
Digital Rotary Torque Sensor, 0.1/5/300/1000 Nm to 10000 Nm
ATO-TQS-D03
$939.15
Digital rotary torque sensor with LCD display has the capacity range from 0.1 Nm/0.3 Nm/1 Nm/5 Nm/10 Nm/300 Nm/1000 Nm to 10000 Nm. LCD display can show torque, speed and power value at the same time. Dynamic torque sensor adopts two NSK shafts to ensure starting torque as low as 0.00001 Nm. Rotary torque transducer with 7 pin waterproof circular connector and 3m cable can measure both forward and reverse torque, and then output ±5V/0-10V/4-20mA/RS485 torque signal to PLC.