Network/Ethernet Cable Tracer, RJ45, RJ11

$184.96
Network cable tracer is an intelligent cable tracer consisting of a transmitter and a receiver. Receiver RJ45 interface for short-circuit/break/sequence detection of network cables, transmitter RJ45 interface for cable finding/pairing detection of network cables. The ethernet cable tracer is suitable for routine network communication maintenance, integrated cabling network projects and other metal conductor wiring projects and maintenance work.
SKU: ATO-NCT-683
Free Shipping
Delivery date: 6-12 days

The low cost network cable tracer has an RJ45 connector for ethernet cables and an RJ11 connector for telephone line testing. The receiver offers a range of up to 3000m on the RJ11 port and up to 100m on the RJ45 port.

Specification

ModelATO-UT683
TransmitterPort BlinkingPinpointing the cable on the switch based on the blinking frequencyFrequency 0.3Hz
Line finding FunctionSignal strength greater than 3V Peak-Peak load 600 ohms.Signal frequency: 125KHzOscilloscope measurement
Line Matching FunctionLine sequence test9 green LEDs, indicating line length 300
Line sequence test with fast and slow speeds (fast: 2 Hz, slow: 1 Hz)√
Network cable: shielded/unshielded indication√
Conductivity Testing10kΩ√
Polarity TestingTest range: DC: +5V-+70V or -70V~-5V√
Ringing Test√
Low Power Alert≤ 3.4V (power yellow light flashes at 1Hz when low), < 3.0V forced shutdown√
Input Protection60VDCDC protection
Operating CurrentLine pair current 30mA, line seek plus port flashing max 100mAContinuous operating time > 8 hours
Auto Shut-OffAutomatic shutdown after 60 minutes of no signal detection3.7V supply
Power Supply Battery1050mAh rechargeable lithium battery, 500mA charging current
ReceiverLine Finding functionRJ11 port tracing distance ≥3000m, RJ45 port tracing distance ≥100mH-rank 90dB, M-rank 80dB, L-rank 70dB
NCV FunctionMeasurement voltage range 40-1000VAC, LED, speaker indication
Torch10cm illumination > 200LuxTorch can be switched on or off individually
Headphone Jack3.5mm headphone jackSpeaker disconnects automatically when headphones are inserted
Input Impedance≥100MΩCord finding and NCV are inductive
Low Battery Alert≤ 3.3V, ≤ 3.0V forced shutdown√
Working CurrentOnly open torch current 25mA, 200mA when seeking line maximum volumeContinuous working time > 5 hours
Automatic Switch-OffAutomatic shutdown after 10 minutes without detecting a signal
Power Supply Battery1050mAh rechargeable lithium battery with 500mA charging current3.7V supply
Usage EnvironmentOperating Temperature-10°C to 50°C
Storage Temperature-20°C to 60°C
Operating Humidity20~75% RH (N.C)
Storage Humidity10~90% RH (N.C)
Altitude≤2000m
CertificationCE, RoHs√


Features

  • Receiver RJ45 interface for short-circuit/break/sequence detection of network cables.
  • Transmitter RJ45 interface for line finding/pair detection of network cables.
  • The transmitter RJ11 interface is used to detect the working status of the telephone, the positive and negative level, and the metal wire seeking interface.
  • The ethernet cable tracer has a Micro USB interface and is equipped with a 3.7V 1050mAh rechargeable battery and USB charging function, which effectively extends the life of the product and the battery, and is environmentally friendly and reliable.
  • The headset can be used in noisy environments to avoid external interference.


Dimension (Unit: mm)

Network Cable Tracer Dimension

Details

Ethernet Cable Tracer Details


Applications

The network cable tester is an essential tool used in the field of network and data communication systems. It is primarily used to test the continuity, connectivity, and performance of network cables and wiring. A network cable tester is commonly used in different industries, including IT, telecommunications, security systems, and home automation. Network cable tester applications
Tips: How to interpret the results of a network cable test?

  • Check the continuity of the cable: If the continuity test is passed, it means that there is a complete and unbroken connection between the two ends of the cable. If the test is failed, it means that there is a break or short circuit somewhere in the cable.
  • Verify the cable length: The cable length test will indicate the actual length of the cable. This is important as it will help identify any problems with the cable's quality or performance. If the measured length is different from the actual length of the cable, it may indicate that the cable is damaged or has a high resistance.
  • Check for signal loss: The cable signal loss test measures the amount of signal loss that occurs when transmitting data over the cable. If the test shows a high amount of signal loss, it may indicate that the cable is of poor quality or has been damaged.
  • Verify the cable type: The cable type test will identify the type of cable that has been tested. This is important as different types of cables have different properties and may require different testing procedures.
Product reviews
This cable tester is a lifesaver for me!
5
knuth
Avatar
3/21/2023 7:35 PM
I recently purchased an ATO network cable tester that quickly identifies the correct cable in a bundle of wires and also helps me find end points. The tone generator and probe are easy to use and the kit comes in a handy carrying case.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

The low cost network cable tracer has an RJ45 connector for ethernet cables and an RJ11 connector for telephone line testing. The receiver offers a range of up to 3000m on the RJ11 port and up to 100m on the RJ45 port.

Specification

ModelATO-UT683
TransmitterPort BlinkingPinpointing the cable on the switch based on the blinking frequencyFrequency 0.3Hz
Line finding FunctionSignal strength greater than 3V Peak-Peak load 600 ohms.Signal frequency: 125KHzOscilloscope measurement
Line Matching FunctionLine sequence test9 green LEDs, indicating line length 300
Line sequence test with fast and slow speeds (fast: 2 Hz, slow: 1 Hz)√
Network cable: shielded/unshielded indication√
Conductivity Testing10kΩ√
Polarity TestingTest range: DC: +5V-+70V or -70V~-5V√
Ringing Test√
Low Power Alert≤ 3.4V (power yellow light flashes at 1Hz when low), < 3.0V forced shutdown√
Input Protection60VDCDC protection
Operating CurrentLine pair current 30mA, line seek plus port flashing max 100mAContinuous operating time > 8 hours
Auto Shut-OffAutomatic shutdown after 60 minutes of no signal detection3.7V supply
Power Supply Battery1050mAh rechargeable lithium battery, 500mA charging current
ReceiverLine Finding functionRJ11 port tracing distance ≥3000m, RJ45 port tracing distance ≥100mH-rank 90dB, M-rank 80dB, L-rank 70dB
NCV FunctionMeasurement voltage range 40-1000VAC, LED, speaker indication
Torch10cm illumination > 200LuxTorch can be switched on or off individually
Headphone Jack3.5mm headphone jackSpeaker disconnects automatically when headphones are inserted
Input Impedance≥100MΩCord finding and NCV are inductive
Low Battery Alert≤ 3.3V, ≤ 3.0V forced shutdown√
Working CurrentOnly open torch current 25mA, 200mA when seeking line maximum volumeContinuous working time > 5 hours
Automatic Switch-OffAutomatic shutdown after 10 minutes without detecting a signal
Power Supply Battery1050mAh rechargeable lithium battery with 500mA charging current3.7V supply
Usage EnvironmentOperating Temperature-10°C to 50°C
Storage Temperature-20°C to 60°C
Operating Humidity20~75% RH (N.C)
Storage Humidity10~90% RH (N.C)
Altitude≤2000m
CertificationCE, RoHs√


Features

  • Receiver RJ45 interface for short-circuit/break/sequence detection of network cables.
  • Transmitter RJ45 interface for line finding/pair detection of network cables.
  • The transmitter RJ11 interface is used to detect the working status of the telephone, the positive and negative level, and the metal wire seeking interface.
  • The ethernet cable tracer has a Micro USB interface and is equipped with a 3.7V 1050mAh rechargeable battery and USB charging function, which effectively extends the life of the product and the battery, and is environmentally friendly and reliable.
  • The headset can be used in noisy environments to avoid external interference.


Dimension (Unit: mm)

Network Cable Tracer Dimension

Details

Ethernet Cable Tracer Details


Applications

The network cable tester is an essential tool used in the field of network and data communication systems. It is primarily used to test the continuity, connectivity, and performance of network cables and wiring. A network cable tester is commonly used in different industries, including IT, telecommunications, security systems, and home automation. Network cable tester applications
Tips: How to interpret the results of a network cable test?

  • Check the continuity of the cable: If the continuity test is passed, it means that there is a complete and unbroken connection between the two ends of the cable. If the test is failed, it means that there is a break or short circuit somewhere in the cable.
  • Verify the cable length: The cable length test will indicate the actual length of the cable. This is important as it will help identify any problems with the cable's quality or performance. If the measured length is different from the actual length of the cable, it may indicate that the cable is damaged or has a high resistance.
  • Check for signal loss: The cable signal loss test measures the amount of signal loss that occurs when transmitting data over the cable. If the test shows a high amount of signal loss, it may indicate that the cable is of poor quality or has been damaged.
  • Verify the cable type: The cable type test will identify the type of cable that has been tested. This is important as different types of cables have different properties and may require different testing procedures.
Product reviews
This cable tester is a lifesaver for me!
5
knuth
Avatar
3/21/2023 7:35 PM
I recently purchased an ATO network cable tester that quickly identifies the correct cable in a bundle of wires and also helps me find end points. The tone generator and probe are easy to use and the kit comes in a handy carrying case.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews