Nema 34 Closed Loop Stepper Motor, 2 Phase, 6.2A, 4.5N·m

$183.44
Factory price Nema 34 (86 x 86mm) closed loop stepper motor with encoder for sale, comes with holding torque of 4.5N·m, 12mm long shaft, 1.8 degree step angle, 4 wire connections, suitable for CNC machine, 3D printer and robot arm, etc. This hybrid stepper motor draws high current of up to 6.2 amps with a step accuracy of ±5%.
SKU: ATO-STEP-34CM620
Free Shipping
Delivery date: 6-12 days

High precision Nema 34 closed loop stepper motor with high holding torque of 4.5 N·m is suitable for the biggest projects, such as CNC application, robotic, 3D technology and so on. The bipolar stepper motor is 1.8 degrees per step with 12mm shaft size and encoder performed well in various applications.

Physical Specification

  • Model Number: ATO-FY86EM620BC1
  • Matched the Driver Model: ATO-FYDB808T
  • Flanged Size: 86 x 86mm (Nema 34)
  • Motor Length: 102mm
  • Shaft Diameter: 14mm
  • Number of Leads: 4 wire
  • Weight: 2.1kg

Electrical Specification

  • Motor Type: Bipolar Closed Loop Stepper
  • Step Angle: 1.8°
  • Rated Current: 6.2A
  • Holding Torque: 450 N·cm (4.5 N·m, 637 Oz.in)
  • Phase Resistance: 0.34Ω
  • Phase Inductance: 2.5mH
  • Rotor Inertia: 1800g·cm2

Dimensions (Unit: mm)

L=102mm

Dimensions of Nema 34 2 Phase Closed Loop Stepper Motor

Motor & Encoder Wiring Diagram

Wiring Diagram of 2 Phase Closed Loop Stepper Motor

Speed-Torque Curve Diagram

Speed Torque Curve Diagram of Nema 34 2 Phase Closed Loop Stepper Motor

Details

Nema 34 Closed  Loop Stepper Motor 4.5N·m-12N·m Details

Tips: How to safely operate stepper motors

Whether it is caused by improper operation to damage the stepper motor, or because of improper use, the safety of it is threatened, which will cause huge losses. The stepper motor should be operated safely in the application.

Fully understand the motor: If you want to operate a permanent magnet stepper motor safely, read the instructions and specs carefully before using it, understand all aspects of the motor, clarify how the motor is used, how to switch it on and off.

Operate in accordance with the regulations: maintain the safe operation of the high percision stepper motor, and use the motor in strict accordance with the regulations to ensure the correct operation of all aspects of it, and avoid undesirable consequences and safety problems caused by improper operation or wrong operation.

Safe operation of stepper motors: always pay attention to the condition of the motor, find out and stop the inspection in time when there is an abnormality in the motor, to prevent potential safety hazards due to emergencies, or even accidents.

How to control a stepper motor using a PLC and HMI?
This video shows you how to configure a PLC, HMI, motor driver, and proximity sensor to perform Origin Return (OPR) control of a stepper motor.

Common Stepper Motor Troubleshooting Problems and Tips
In this video, 9 common problems that can occur with stepper motors are discussed, and expert advice is provided for diagnosing and effectively resolving these problems. If you have ever experienced problems with your stepper motor or want to be prepared for any future problems, this video is a must watch.

Controlling Stepper Motors with HMI and PLC for Fixed Cycle Power Delivery
In this video, we explore the step-by-step process of configuring an HMI and PLC to synchronize and manage specific cycle lengths of stepper motors, ensuring accurate power delivery.

VFD Two-Wire Control Wiring with Push Button for Forward Motor

In this video we've guided you through how to do VFD control wiring with a self-lock push button switch to run the motor in forward direction. We've covered everything from wiring to programming and even a test run. So just watch it through and hope you'll find it informative and helpful.

In the case of non-overload, the speed and stop position of the motor only depend on the frequency and pulse number of the pulse signal, and are not affected by the load change. That is, when a pulse signal is added to the motor, the motor rotates through a step angle. The existence of this linear relationship, coupled with the characteristics of the stepper motor having only periodic errors and no cumulative errors. This makes it very simple to use stepper motors to control the speed, position and other control fields.

Warranty

360 Days warranty

Thank you for buying industrial automation products on ATO.com, all products sold by ATO and the partner cover a 360-days-warranty, effective from the date of receiving the products.

What is covered?

ATO is responsible for providing free spare parts, free technical support to assist the customer to repair the defective products until the problem is solved.

What is not covered?

  • Product purchased from anyone other than ATO store or a ATO authorized reseller.
  • Expendable parts.
  • Routine cleaning or normal cosmetic and mechanical wear.
  • Damage from misuse, abuse or neglect.
  • Damage from use of parts other than ATO approved.
  • Damage from use outside the product’s usage or storage parameters.
  • Damage from use of parts not sold by ATO.
  • Damage from modification or incorporation into other products.
  • Damage from repair or replacement of warranted parts by a service provider other than a ATO authorized service provider.
  • Damage caused by the application environment not meeting the product usage requirements and the failure to perform preventive maintenance.
Product reviews
Very satisfied with this stepper motor.
5
Danie
Avatar
3/10/2022 10:54 PM
Got this 6.2A Nema 34 stepper motor as a replacement for an old one on my DIY CNC. It has a good torque if provided with appropriate power. I am very satisfied with this closed loop stepping motor and I would buy another as needed.
Was this review helpful? Yes No (0/0)
Very happy with this Nema 34 closed loop stepper motor.
5
Kostka
Avatar
6/29/2022 12:48 AM
This Nema 34 stepper motor combined with matched stepper driver, provides speed, consistency, high torque, and excellent precision. It works great for what I was using it for and never seemed to have a problem. Very happy with this product.
Was this review helpful? Yes No (0/0)
Excellent quality.
5
Mccurry
Avatar
7/28/2022 12:23 AM
I used these Nema 34 stepper motors to replace to motors only two of my 3D printers that I have been working to death. They work great now. They’ve been printing non-stop for a few weeks now and have no issues. Excellent quality.
Was this review helpful? Yes No (0/0)
What is the current required for these stepper motor pulses?
5
katia
Avatar
7/20/2023 1:24 AM
What is usually used to provide the pulse signal for the stepper motor?
I am unsure as to why the Arduino's PWM pins will not work for this application. An Arduino can supply 5V pulses.
What is the current required for these pulses?
Was this review helpful? Yes No (0/0)
ATO Responded
The pulse signal can be sent by a PLC or a single-chip microcomputer.
We have never used the pulse provided by the Arduino you mentioned, so we are not sure whether it can be used.
A pulse is a signal, there is no current required.
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

High precision Nema 34 closed loop stepper motor with high holding torque of 4.5 N·m is suitable for the biggest projects, such as CNC application, robotic, 3D technology and so on. The bipolar stepper motor is 1.8 degrees per step with 12mm shaft size and encoder performed well in various applications.

Physical Specification

  • Model Number: ATO-FY86EM620BC1
  • Matched the Driver Model: ATO-FYDB808T
  • Flanged Size: 86 x 86mm (Nema 34)
  • Motor Length: 102mm
  • Shaft Diameter: 14mm
  • Number of Leads: 4 wire
  • Weight: 2.1kg

Electrical Specification

  • Motor Type: Bipolar Closed Loop Stepper
  • Step Angle: 1.8°
  • Rated Current: 6.2A
  • Holding Torque: 450 N·cm (4.5 N·m, 637 Oz.in)
  • Phase Resistance: 0.34Ω
  • Phase Inductance: 2.5mH
  • Rotor Inertia: 1800g·cm2

Dimensions (Unit: mm)

L=102mm

Dimensions of Nema 34 2 Phase Closed Loop Stepper Motor

Motor & Encoder Wiring Diagram

Wiring Diagram of 2 Phase Closed Loop Stepper Motor

Speed-Torque Curve Diagram

Speed Torque Curve Diagram of Nema 34 2 Phase Closed Loop Stepper Motor

Details

Nema 34 Closed  Loop Stepper Motor 4.5N·m-12N·m Details

Tips: How to safely operate stepper motors

Whether it is caused by improper operation to damage the stepper motor, or because of improper use, the safety of it is threatened, which will cause huge losses. The stepper motor should be operated safely in the application.

Fully understand the motor: If you want to operate a permanent magnet stepper motor safely, read the instructions and specs carefully before using it, understand all aspects of the motor, clarify how the motor is used, how to switch it on and off.

Operate in accordance with the regulations: maintain the safe operation of the high percision stepper motor, and use the motor in strict accordance with the regulations to ensure the correct operation of all aspects of it, and avoid undesirable consequences and safety problems caused by improper operation or wrong operation.

Safe operation of stepper motors: always pay attention to the condition of the motor, find out and stop the inspection in time when there is an abnormality in the motor, to prevent potential safety hazards due to emergencies, or even accidents.

Product reviews
Very satisfied with this stepper motor.
5
Danie
Avatar
3/10/2022 10:54 PM
Got this 6.2A Nema 34 stepper motor as a replacement for an old one on my DIY CNC. It has a good torque if provided with appropriate power. I am very satisfied with this closed loop stepping motor and I would buy another as needed.
Was this review helpful? Yes No (0/0)
Very happy with this Nema 34 closed loop stepper motor.
5
Kostka
Avatar
6/29/2022 12:48 AM
This Nema 34 stepper motor combined with matched stepper driver, provides speed, consistency, high torque, and excellent precision. It works great for what I was using it for and never seemed to have a problem. Very happy with this product.
Was this review helpful? Yes No (0/0)
Excellent quality.
5
Mccurry
Avatar
7/28/2022 12:23 AM
I used these Nema 34 stepper motors to replace to motors only two of my 3D printers that I have been working to death. They work great now. They’ve been printing non-stop for a few weeks now and have no issues. Excellent quality.
Was this review helpful? Yes No (0/0)
What is the current required for these stepper motor pulses?
5
katia
Avatar
7/20/2023 1:24 AM
What is usually used to provide the pulse signal for the stepper motor?
I am unsure as to why the Arduino's PWM pins will not work for this application. An Arduino can supply 5V pulses.
What is the current required for these pulses?
Was this review helpful? Yes No (0/0)
ATO Responded
The pulse signal can be sent by a PLC or a single-chip microcomputer.
We have never used the pulse provided by the Arduino you mentioned, so we are not sure whether it can be used.
A pulse is a signal, there is no current required.
Only registered users can write reviews