Nema 34 3-phase Stepper Motor, 3.3A, 1.2 degree, 6 wires

$175.85
High torque Nema 34 hybrid stepper motor, 3 phase 6 wires, 1.2 deg. step angle(300 steps/revolution), 3.3A phase current, 7.6Nm holding torque. Low cost, high quality and manufacturer direct sale.
SKU: ATO-STEP-31263433
Free Shipping
Delivery date: 6-12 days

Nema 34 Stepper motor, 7.6Nm holding torque, 3.3A phase curent, 1.2° step angle, manufacturer direct sale.

Specification

BasicsModelATO3126-3306A
Matched Driver ModelATODSP32207(Click it to see more info)
Holding torque7.6Nm
Current/phase3.3A
Resistance1.8Ω
Step angle1.2°
Rotor inertia3300g.cm²
Weight3.8kg
Length126mm
Motor leads6
Technical parametersStep Angle Accuracy±5%(full step, no load)
Resistance Accuracy±10%
Inductance Accuracy±20%
Temperature Rise80℃ Max.(rated current, 2 phase on)
Ambient Temperature-10℃~+ 50℃
Insulation Resistance100MΩ Min 500V DC
Dielectric Strength500V AC for one minute
Shaft Radial Play0.06Max.(450g)
Shaft Axial Play0.08Max.(450g)

Dimensions

nema 34 stepper motor dimension

Motor Connection

3 phase stepper motor wiring

Details

Nema 34 Stepper Motor,1.1A-8A Details

Tips: Selection of stepper motor: confirming the working environment

  1. Confirm whether the working environment can satisfy the requirements on the specification, including temperature and humidity. The using temperature range of the stepper motor is generally 0~50°C, and its humidity is 20%RH~90%RH; storage environment range is -20°~70°C, and the humidity is 15%RH~95%RH.
  2. If the ambient temperature is high, it is necessary to reduce the current working condition or improve heat dissipation condition or select high temperature resistance motor.
  3. Generally, the stepper motor features UL B-level insulation grade. Considering interior and exterior temperature difference, the surface of hot stable stepper motor can bear 100°C, but it is advised to control it within 80°C.
  4. In case of special situation, it is necessary to strictly control the rise in temperature of motor. The stepper motor with large torque can be used to substantially reduce the working current to reduce the heating quantity of the motor.
  5. For common stepper motor, there are no protection measures. It cannot be used at dust environment.
  6. Stepper motor should not be in humidity and free of collision.

VFD Two-Wire Control Wiring with Push Button for Forward Motor

In this video we've guided you through how to do VFD control wiring with a self-lock push button switch to run the motor in forward direction. We've covered everything from wiring to programming and even a test run. So just watch it through and hope you'll find it informative and helpful.

Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Nema 34 Stepper motor, 7.6Nm holding torque, 3.3A phase curent, 1.2° step angle, manufacturer direct sale.

Specification

BasicsModelATO3126-3306A
Matched Driver ModelATODSP32207(Click it to see more info)
Holding torque7.6Nm
Current/phase3.3A
Resistance1.8Ω
Step angle1.2°
Rotor inertia3300g.cm²
Weight3.8kg
Length126mm
Motor leads6
Technical parametersStep Angle Accuracy±5%(full step, no load)
Resistance Accuracy±10%
Inductance Accuracy±20%
Temperature Rise80℃ Max.(rated current, 2 phase on)
Ambient Temperature-10℃~+ 50℃
Insulation Resistance100MΩ Min 500V DC
Dielectric Strength500V AC for one minute
Shaft Radial Play0.06Max.(450g)
Shaft Axial Play0.08Max.(450g)

Dimensions

nema 34 stepper motor dimension

Motor Connection

3 phase stepper motor wiring

Details

Nema 34 Stepper Motor,1.1A-8A Details

Tips: Selection of stepper motor: confirming the working environment

  1. Confirm whether the working environment can satisfy the requirements on the specification, including temperature and humidity. The using temperature range of the stepper motor is generally 0~50°C, and its humidity is 20%RH~90%RH; storage environment range is -20°~70°C, and the humidity is 15%RH~95%RH.
  2. If the ambient temperature is high, it is necessary to reduce the current working condition or improve heat dissipation condition or select high temperature resistance motor.
  3. Generally, the stepper motor features UL B-level insulation grade. Considering interior and exterior temperature difference, the surface of hot stable stepper motor can bear 100°C, but it is advised to control it within 80°C.
  4. In case of special situation, it is necessary to strictly control the rise in temperature of motor. The stepper motor with large torque can be used to substantially reduce the working current to reduce the heating quantity of the motor.
  5. For common stepper motor, there are no protection measures. It cannot be used at dust environment.
  6. Stepper motor should not be in humidity and free of collision.
Only registered users can write reviews