Miniature Through Hole Slip Ring, Inner Diameter 3/5/8mm

$76.92
Miniature through hole slip ring is suitable for any rotating device with hole diameter≤3/5/8mm. Corresponding outer diameters are 17mm/22mm/35mm respectively. It can transmit current/signal in 360° rotation. Standard models are available in 2~12 circuits 2A or 5A. Other circuits and current/signal such as 10A/20A/30A are customizable.
SKU: ATO-THSR-358
*
Free Shipping
Delivery date: 6-12 days

Features

  • Inner diameter, outer diameter, number of circuits, current, signal and other specifications of the through hole slip ring are customizable according requirements.
  • Miniature through hole slip rings adopt integrated structure design and is easy to install. Compared with similar products, it has the advantages of smaller size, higher rotation accuracy, more stable performance and longer service life.
  • It can be used for industrial applications such as hydraulic or pneumatic devices and other devices that require 360° rotation to conduct or transmit various control signals.

Specification

ModelATO-H0317ATO-H0522ATO-H0835
Inner Diameter (ID)3mm5mm8mm
Outer Diameter (OD)17mm22mm35mm
Lead Wire Spec.AWG26# Silver-plated teflonAWG26# Silver-plated teflonAWG22# Silver-plated teflon
Rated Voltage0~240VAC/VDC0~240VAC/VDC0~440VAC/VDC
Working Life20 million revolutions
Rotating Speed250rpm
Working Temp.-30℃~80℃
Work Humidity0~85% RH
Contact materialgold alloy
Housing MaterialAL alloy
Torque0.05N.m (+0.02N.m/6 circuits)
Insulation Resistance≥500mΩ/500VDC
CertificationCE, RoHS
Lead Wire LengthStandard 300 mm (can be customized)
Dielectric Strength500VAC@50Hz,60s
Electrical Noise<0.01Ω
IP GradeIP51

Note: Please contact us if you need the flange

ATO-H0317 Through Hole Slip Ring Dimension Drawing (unit: mm)

ATO-THSR-H0317 Through Hole Slip Ring Dimension Drawing

ATO-H0522 (6 Circuits) Through Hole Slip Ring Dimension Drawing (unit: mm)

ATO-THSR-H0522 (6 Circuits) Through Hole Slip Ring Dimension Drawing

ATO-H0522 (12 Circuits) Through Hole Slip Ring Dimension Drawing (unit: mm)

ATO-THSR-H0522 (12 Circuits) Through Hole Slip Ring Dimension Drawing

ATO-H0835 Through Hole Slip Ring Dimension Drawing (unit: mm)

ATO-THSR-H0835 Through Hole Slip Ring Dimension Drawing

Color Code of Lead Wire

ring #123456789101112
colorBLKBRNREDORGYELGRNBLUPURGRYWHTPINKLGT BLU

Through Hole Slip Ring with Anti-Rotation Tab Installation Diagram

Through Hole Slip Ring with Anti-Rotation Tab Installation Diagram

Through Hole Slip Ring without Anti-Rotation Tab Installation Diagram

Through Hole Slip Ring without Anti-Rotation Tab Installation Diagram

Tips: What is a through hole slip ring?

The through hole slip ring is also called through bore slip ring, is a rotating conductive device with a middle hole structure. Through hole slip rings are mainly used to transmit precision signals, weak currents, high currents, high voltages, and the like. It features low torque, low loss, maintenance-free, low electrical noise, and long life. The through hole conductive slip ring is mainly composed of metal ring and brush wire, and contact modes of the two are points contact type and surface contact type. The contact resistance of slip rings directly affect the effect of signal transmission. In general, the smaller the contact resistance, the better. For the factors affecting the magnitude of contact resistance, in addition to contact materials and contact form of the contact surface, it also include the pressure of brush wires on the slip ring. The greater the pressure, the smaller the contact resistance, but the increase in pressure has a certain limit. If the limit is exceeded, the friction torque will increase, causing the contact portion to wear greatly. Through hole slip rings generally use the number of revolutions as an indicator of their life. The maximum service life of a through hole slip ring is approximately tens of millions of revolutions. If the slip ring is used in application require high speed rotation, its life is limited. Therefore, it is necessary to regularly check the performance of through hole slip rings to ensure reliable operation in actual use.

Through Hole Slip Ring Model Description

Through Hole Slip Ring Model Description

Standard Model List

ATO-H0317 Series Model List
ModelNumber of Circuits (signal or 0~2A current)Length L (mm)
ATO-H0317-02S*213.3
ATO-H0317-03S313.3
ATO-H0317-04S413.5
ATO-H0317-06S621
ATO-H0317-08S821
ATO-H0522 Series Model List
ModelNumber of Circuits (signal or 0~2A current)Length L (mm)
ATO-H0522-02S219
ATO-H0522-03S319
ATO-H0522-04S419
ATO-H0522-06S*625.5
ATO-H0522-08S825.5
ATO-H0522-10S1025.5
ATO-H0522-12S*1225.5
ATO-H0835 Series Model List
ModelMax current per circuitNumber of CircuitsLength L (mm)
ATO-H0835-0605*5A642
ATO-H0835-1205*5A1242
ATO-H0835-061010A642
ATO-H0835-032020A342
ATO-H0835-023030A242

Note

  1. * Represents spot models, please contact us for other models. 
  2. Circuits can be combined in parallel for bigger current, N circuits of 2A to get N*2A, such as 2 circuits of 2A in parallel for 4A use.

Proposition 65 Warning

*WARNING: This product can expose you to chemicals, including lead, which is known to the State of California to cause birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Features

  • Inner diameter, outer diameter, number of circuits, current, signal and other specifications of the through hole slip ring are customizable according requirements.
  • Miniature through hole slip rings adopt integrated structure design and is easy to install. Compared with similar products, it has the advantages of smaller size, higher rotation accuracy, more stable performance and longer service life.
  • It can be used for industrial applications such as hydraulic or pneumatic devices and other devices that require 360° rotation to conduct or transmit various control signals.

Specification

ModelATO-H0317ATO-H0522ATO-H0835
Inner Diameter (ID)3mm5mm8mm
Outer Diameter (OD)17mm22mm35mm
Lead Wire Spec.AWG26# Silver-plated teflonAWG26# Silver-plated teflonAWG22# Silver-plated teflon
Rated Voltage0~240VAC/VDC0~240VAC/VDC0~440VAC/VDC
Working Life20 million revolutions
Rotating Speed250rpm
Working Temp.-30℃~80℃
Work Humidity0~85% RH
Contact materialgold alloy
Housing MaterialAL alloy
Torque0.05N.m (+0.02N.m/6 circuits)
Insulation Resistance≥500mΩ/500VDC
CertificationCE, RoHS
Lead Wire LengthStandard 300 mm (can be customized)
Dielectric Strength500VAC@50Hz,60s
Electrical Noise<0.01Ω
IP GradeIP51

Note: Please contact us if you need the flange

ATO-H0317 Through Hole Slip Ring Dimension Drawing (unit: mm)

ATO-THSR-H0317 Through Hole Slip Ring Dimension Drawing

ATO-H0522 (6 Circuits) Through Hole Slip Ring Dimension Drawing (unit: mm)

ATO-THSR-H0522 (6 Circuits) Through Hole Slip Ring Dimension Drawing

ATO-H0522 (12 Circuits) Through Hole Slip Ring Dimension Drawing (unit: mm)

ATO-THSR-H0522 (12 Circuits) Through Hole Slip Ring Dimension Drawing

ATO-H0835 Through Hole Slip Ring Dimension Drawing (unit: mm)

ATO-THSR-H0835 Through Hole Slip Ring Dimension Drawing

Color Code of Lead Wire

ring #123456789101112
colorBLKBRNREDORGYELGRNBLUPURGRYWHTPINKLGT BLU

Through Hole Slip Ring with Anti-Rotation Tab Installation Diagram

Through Hole Slip Ring with Anti-Rotation Tab Installation Diagram

Through Hole Slip Ring without Anti-Rotation Tab Installation Diagram

Through Hole Slip Ring without Anti-Rotation Tab Installation Diagram

Tips: What is a through hole slip ring?

The through hole slip ring is also called through bore slip ring, is a rotating conductive device with a middle hole structure. Through hole slip rings are mainly used to transmit precision signals, weak currents, high currents, high voltages, and the like. It features low torque, low loss, maintenance-free, low electrical noise, and long life. The through hole conductive slip ring is mainly composed of metal ring and brush wire, and contact modes of the two are points contact type and surface contact type. The contact resistance of slip rings directly affect the effect of signal transmission. In general, the smaller the contact resistance, the better. For the factors affecting the magnitude of contact resistance, in addition to contact materials and contact form of the contact surface, it also include the pressure of brush wires on the slip ring. The greater the pressure, the smaller the contact resistance, but the increase in pressure has a certain limit. If the limit is exceeded, the friction torque will increase, causing the contact portion to wear greatly. Through hole slip rings generally use the number of revolutions as an indicator of their life. The maximum service life of a through hole slip ring is approximately tens of millions of revolutions. If the slip ring is used in application require high speed rotation, its life is limited. Therefore, it is necessary to regularly check the performance of through hole slip rings to ensure reliable operation in actual use.

Only registered users can write reviews
Customers who bought this item also bought

Electrical Miniature Slip Ring, 4/6/8/12 Wires, 1A, 6.5mm

ATO-MNTSR-065
$71.38
Electrical miniature slip ring for sale has outer diameter of 6.5mm. Standard model is available in 4-wire, 6-wire, 8-wire, and 12-wire and the maximum current per channel is 1A. Other combinations of wire count and current are customizable. Installation method is no-flange installation.