Mini Needle Cylinder, Single Acting

$13.28
Mini needle cylinder for sale, cylinder bores available in 6 mm, 10 mm and 15 mm, stroke options 5 mm, 10 mm and 15 mm. The single-acting cylinder is easy to control, and the rear intake pipe is convenient and soft without impact. The ATO mini bolt cylinder comes in an attractive shape and makes it easy to carry and use.
SKU: ATO-PC-CJPB
*
*
This product has a minimum quantity of 10
Free Shipping
Delivery date: 10-12 days

The mini pin cylinder uses air pressure to push the piston rod and is generally used for positioning devices. The needle cylinder has a solid brass body for durability. Single acting bolt cylinders are available with strokes of 5 mm, 10 mm and 15 mm and bore sizes of 6 mm, 10 mm and 15 mm.

Specification

ModelATO-CJPB
Bore6mm10mm15mm
Working MediumAir
Actuation ModeSingle acting - spring return
Maximum Operating Pressure0.7 Mpa
Minimum Operating Pressure0.2 Mpa0.15 Mpa
Ambient and Fluid Temperature-10~70°C (but not freezing)
BufferNone
Use Piston Speed50~500mm/s
Stroke Tolerance+1.0mm
GreaseIs not required
Port SizeM5*0.8 (panel type)


Dimension (Unit mm)

Mini needle cylinder dimension

BoreABCEFGHKMMNNRSWZO
5st10st15st5st10st15st5st10st15st
671213.9612.519.526.56.593.5M3x0.5M10x1.0918.525.532.5327.534.541.53
10101922614.5212812123.5M4x0.7M15x1.51320.52734432.539465
15122731716.522.52919144.2M5x0.8M22x1.52023.529.536537.543.5506

Tips: What are the 2 types of rotary cylinders?

Vane type rotary cylinder:  through the internal stop block or external block to change its swing angle. Stop block and cylinder body are fixed together, and the blade and the shaft are connected together. The pneumatic pressure acts on the blade to drive the rotating shaft and output torque.

Geared rotary cylinder:  pneumatic pressure pushes the piston to drive the rack to do linear movement, the rack drives the gear to do rotary movement, and there is a gear shaft output torque that drive the external load swing.

Proposition 65 Warning

*WARNING: This product can expose you to chemicals, including lead, which is known to the State of California to cause birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Product reviews
The needle cylinder works very efficiently
5
Adrian
Avatar
2/21/2023 6:25 PM
The needle cylinder's quick response time and consistent performance have significantly improved our efficiency and reduced downtime. The installation process was straightforward, and the cylinder has been easy to maintain. Overall, we are very satisfied with the needle cylinder and would highly recommend it to others in the industry.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

The mini pin cylinder uses air pressure to push the piston rod and is generally used for positioning devices. The needle cylinder has a solid brass body for durability. Single acting bolt cylinders are available with strokes of 5 mm, 10 mm and 15 mm and bore sizes of 6 mm, 10 mm and 15 mm.

Specification

ModelATO-CJPB
Bore6mm10mm15mm
Working MediumAir
Actuation ModeSingle acting - spring return
Maximum Operating Pressure0.7 Mpa
Minimum Operating Pressure0.2 Mpa0.15 Mpa
Ambient and Fluid Temperature-10~70°C (but not freezing)
BufferNone
Use Piston Speed50~500mm/s
Stroke Tolerance+1.0mm
GreaseIs not required
Port SizeM5*0.8 (panel type)


Dimension (Unit mm)

Mini needle cylinder dimension

BoreABCEFGHKMMNNRSWZO
5st10st15st5st10st15st5st10st15st
671213.9612.519.526.56.593.5M3x0.5M10x1.0918.525.532.5327.534.541.53
10101922614.5212812123.5M4x0.7M15x1.51320.52734432.539465
15122731716.522.52919144.2M5x0.8M22x1.52023.529.536537.543.5506

Tips: What are the 2 types of rotary cylinders?

Vane type rotary cylinder:  through the internal stop block or external block to change its swing angle. Stop block and cylinder body are fixed together, and the blade and the shaft are connected together. The pneumatic pressure acts on the blade to drive the rotating shaft and output torque.

Geared rotary cylinder:  pneumatic pressure pushes the piston to drive the rack to do linear movement, the rack drives the gear to do rotary movement, and there is a gear shaft output torque that drive the external load swing.

Product reviews
The needle cylinder works very efficiently
5
Adrian
Avatar
2/21/2023 6:25 PM
The needle cylinder's quick response time and consistent performance have significantly improved our efficiency and reduced downtime. The installation process was straightforward, and the cylinder has been easy to maintain. Overall, we are very satisfied with the needle cylinder and would highly recommend it to others in the industry.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews