Microwave Presence Sensor, Ceiling Mount, 5.8GHz, 4-16m

$66.71
Microwave presence sensor detecting movement within a 4–16 m range, using the Doppler principle with a flat antenna to process 5.8 GHz signals and trigger a relay for light control. Designed for ceiling-mount installation.
SKU: ATO-MPS-CM
Free Shipping
Delivery date: 6-12 days

Note: The microwave presence sensor continuously detects human presence within the detection area and turns off the load after the person leaves and the preset delay expires.

The microwave presence sensor provides automatic lighting control by reliably detecting movement. It analyzes the environment using microwave technology and seamlessly activates the lights only when needed, ensuring both convenience and energy efficiency.

Specification

ModelATO-TDL-1916
Rated VoltageAC 85V ~ 265V
Operating Frequency5.8 GHz
Operating Temperature-20℃ ~ 60℃
Input Voltage85V ~ 220V AC (50Hz)
Output Voltage85V ~ 220V AC (50Hz)
Standby PowerAbout 0.6
Microwave Frequency5.8GHz ± 100MHz
Microwave Power<1 mW (equivalent to 0.1% of mobile phone radiation)
Sensing PrincipleDoppler
Antenna TypeFlat Antenna (Directional Detection)
Installation MethodCeiling Mount
Detection Height2.5 m ~ 5 m (Max:10m)
Detection Distance4 m / 8 m / 12 m / 16 m, 4-level adjustable
Sensing Angle30–170" (detection angle with 360° coverage)
Delay Time10 s / 30 s / 1 min / 5 min / 10 min / 15 min / 20 min / 30 min, 8-level adjustable
Load Power16A Relay (Incandescent 1600W / CFL 600W / LED 150W)
Load TypeIncandescent, energy-saving, and LED lamps, as well as other lighting and electrical devices
Light Control Adjustment5 ~ 500 Lux, 8-level adjustable
ColorElegant White
1P Rating1P20
DimensionsDiameter 97 mm × Height 59 mm
Weight300 g


Feature

  • High Sensitivity: The microwave pressure transmitter sensor accurately discriminates between biological and non-biological movement, significantly reducing the rate of false alarms.
  • Strong Anti-interference: Operating at 5.8GHz, the microwave pressure transducer sensor is minimally affected by external environmental factors, guaranteeing stable and reliable performance.
  • Auto Light Detection: The microwave presence sensor automatically assesses ambient light intensity, turning the light on only when necessary and when presence is detected.
  • Full Automation: This microwave pressure transmitter offers fully automatic sensing ("On with presence, off after leave"), promoting safety and energy efficiency without being influenced by sound or other objects.
  • Easy Configuration: A DIP switch with oxidation-resistant contacts allows for precise, convenient setting adjustments with minimal error and a long operational lifespan.
  • High-Power Terminal: Equipped with 16A terminals that support wires up to 4mm², enabling simple, secure connections and reduced heat generation.

Detail

Microwave presence sensor detail

Size (unit: mm)

Microwave presence sensor size

Wiring

Microwave presence sensor wiring

Two-way Control Wiring

Microwave presence sensor wiring

Application

Microwave presence sensor application

Tip 1: How to Use and Test Microwave Presence Sensor?

Instructions for Use

(Ceiling-mounted installation, with settings: 100% detection range, 30‑second delay, light‑sensing disabled)

  1. Install the microwave presence sensor on the ceiling at a height of 3 meters, ensuring the antenna faces horizontally downward.
  2. Turn the power switch on once.
  3. The microwave pressure transmitter enters its startup self‑test phase: the connected light will stay at 100% brightness for about 15–30 seconds, then gradually dim to 0%.
  4. Next, the microwave pressure transmitter sensor begins environment detection: the light remains off (0% brightness) for approximately 15–30 seconds.
  5. The microwave pressure transducer sensor then enters the intelligent control phase. When a person enters the detection zone (typically 5–8 meters in radius), the light turns on at 100% brightness and remains on as long as motion continues. After the zone is vacant for 30 seconds, the light automatically dims to 0%.
  6. Following a brief 3‑second interval, if motion is detected again, the light immediately returns to 100% brightness and will turn off 30 seconds after the area is empty.

Testing Method

  1. During testing (especially when the prototype is placed on a table with the sensor antenna facing upward), a person must stay at least 1 meter away from the microwave presence sensor antenna.
  2. After the light turns off, the presence sensor requires at least a 3-second interval before it can be triggered again.
  3. During testing, try to eliminate external interference, such as movement behind walls, operating machinery, or low-frequency resonance, to prevent false triggers or misjudgments.
  4. Before setting the DIP switch parameters, the power to the microwave presence sensor must be turned off. After completing the settings, restore power to the sensor.

Tip 2: Common Fault Diagnosis and Troubleshooting

Fault PhenomenonCauseSolution
Switch does not work (light off)Incorrect light-control setting or ambient light too highTurn off power, adjust light-control, reset
Load lamp faultyReplace lamp
Power switch off or no powerTurn on power, check supply
Microwave presence sensor distance too low or movement too smallAdjust sensor distance/amplitude, restart
Switch always works (light always on)Continuous movement in sensor areaStop movement, then restart
Electromagnetic interference from nearby machineryCheck installation environment
Product reviews
Convenient and energy-efficient
5
Penelop
Avatar
12/7/2025 5:54 PM
I installed the microwave presence sensor on my ceiling, and it has been performing very reliably. The 5.8 GHz detection is fast and accurate, covering the full 4–16 m range without false triggers. It responds instantly when someone enters the area, and the relay output controls my lights smoothly and consistently. The flat-antenna design keeps the sensor low-profile, and installation was simple.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Note: The microwave presence sensor continuously detects human presence within the detection area and turns off the load after the person leaves and the preset delay expires.

The microwave presence sensor provides automatic lighting control by reliably detecting movement. It analyzes the environment using microwave technology and seamlessly activates the lights only when needed, ensuring both convenience and energy efficiency.

Specification

ModelATO-TDL-1916
Rated VoltageAC 85V ~ 265V
Operating Frequency5.8 GHz
Operating Temperature-20℃ ~ 60℃
Input Voltage85V ~ 220V AC (50Hz)
Output Voltage85V ~ 220V AC (50Hz)
Standby PowerAbout 0.6
Microwave Frequency5.8GHz ± 100MHz
Microwave Power<1 mW (equivalent to 0.1% of mobile phone radiation)
Sensing PrincipleDoppler
Antenna TypeFlat Antenna (Directional Detection)
Installation MethodCeiling Mount
Detection Height2.5 m ~ 5 m (Max:10m)
Detection Distance4 m / 8 m / 12 m / 16 m, 4-level adjustable
Sensing Angle30–170" (detection angle with 360° coverage)
Delay Time10 s / 30 s / 1 min / 5 min / 10 min / 15 min / 20 min / 30 min, 8-level adjustable
Load Power16A Relay (Incandescent 1600W / CFL 600W / LED 150W)
Load TypeIncandescent, energy-saving, and LED lamps, as well as other lighting and electrical devices
Light Control Adjustment5 ~ 500 Lux, 8-level adjustable
ColorElegant White
1P Rating1P20
DimensionsDiameter 97 mm × Height 59 mm
Weight300 g


Feature

  • High Sensitivity: The microwave pressure transmitter sensor accurately discriminates between biological and non-biological movement, significantly reducing the rate of false alarms.
  • Strong Anti-interference: Operating at 5.8GHz, the microwave pressure transducer sensor is minimally affected by external environmental factors, guaranteeing stable and reliable performance.
  • Auto Light Detection: The microwave presence sensor automatically assesses ambient light intensity, turning the light on only when necessary and when presence is detected.
  • Full Automation: This microwave pressure transmitter offers fully automatic sensing ("On with presence, off after leave"), promoting safety and energy efficiency without being influenced by sound or other objects.
  • Easy Configuration: A DIP switch with oxidation-resistant contacts allows for precise, convenient setting adjustments with minimal error and a long operational lifespan.
  • High-Power Terminal: Equipped with 16A terminals that support wires up to 4mm², enabling simple, secure connections and reduced heat generation.

Detail

Microwave presence sensor detail

Size (unit: mm)

Microwave presence sensor size

Wiring

Microwave presence sensor wiring

Two-way Control Wiring

Microwave presence sensor wiring

Application

Microwave presence sensor application

Tip 1: How to Use and Test Microwave Presence Sensor?

Instructions for Use

(Ceiling-mounted installation, with settings: 100% detection range, 30‑second delay, light‑sensing disabled)

  1. Install the microwave presence sensor on the ceiling at a height of 3 meters, ensuring the antenna faces horizontally downward.
  2. Turn the power switch on once.
  3. The microwave pressure transmitter enters its startup self‑test phase: the connected light will stay at 100% brightness for about 15–30 seconds, then gradually dim to 0%.
  4. Next, the microwave pressure transmitter sensor begins environment detection: the light remains off (0% brightness) for approximately 15–30 seconds.
  5. The microwave pressure transducer sensor then enters the intelligent control phase. When a person enters the detection zone (typically 5–8 meters in radius), the light turns on at 100% brightness and remains on as long as motion continues. After the zone is vacant for 30 seconds, the light automatically dims to 0%.
  6. Following a brief 3‑second interval, if motion is detected again, the light immediately returns to 100% brightness and will turn off 30 seconds after the area is empty.

Testing Method

  1. During testing (especially when the prototype is placed on a table with the sensor antenna facing upward), a person must stay at least 1 meter away from the microwave presence sensor antenna.
  2. After the light turns off, the presence sensor requires at least a 3-second interval before it can be triggered again.
  3. During testing, try to eliminate external interference, such as movement behind walls, operating machinery, or low-frequency resonance, to prevent false triggers or misjudgments.
  4. Before setting the DIP switch parameters, the power to the microwave presence sensor must be turned off. After completing the settings, restore power to the sensor.

Tip 2: Common Fault Diagnosis and Troubleshooting

Fault PhenomenonCauseSolution
Switch does not work (light off)Incorrect light-control setting or ambient light too highTurn off power, adjust light-control, reset
Load lamp faultyReplace lamp
Power switch off or no powerTurn on power, check supply
Microwave presence sensor distance too low or movement too smallAdjust sensor distance/amplitude, restart
Switch always works (light always on)Continuous movement in sensor areaStop movement, then restart
Electromagnetic interference from nearby machineryCheck installation environment
Product reviews
Convenient and energy-efficient
5
Penelop
Avatar
12/7/2025 5:54 PM
I installed the microwave presence sensor on my ceiling, and it has been performing very reliably. The 5.8 GHz detection is fast and accurate, covering the full 4–16 m range without false triggers. It responds instantly when someone enters the area, and the relay output controls my lights smoothly and consistently. The flat-antenna design keeps the sensor low-profile, and installation was simple.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews