Manual Pressure Test Pump, 5/ 10 MPa

$244.38
Pressure test pump at affordable price for sale online. Manual pressure test pump belongs to hydraulic test pump. 4.5L large water capacity and 32mL/ time water suction frequency. Pressure test pump with 5 and 10 MPa working pressure can be chosen. Hydraulic pump applies in various situations, especially used in pipe water pressure testing.
SKU: ATO-MPTP-KP
*
Free Shipping
Delivery date: 6-12 days

Pressure test pump is a hand operated hydraulic pump. It is a tool good for testing water pressure and sealing performance. Manual pressure test pump with high quality plastic and iron water bank. It is best for pressure vessels and PPR pipes.

Specification:

ModelATO-50K-PATO-100K-P
Working Pressure5 MPa (725 psi)10 MPa (1450 psi)
Water Absorption Frequency32 mL
Water Tank Capacity4.5L
Hose PortG1/2" (DN15, 20mm)
Overall Dimension (L*W*H)300*180*300mm
Pump Plunger Shaft Diameter35mm
Water Tank MaterialPlasticIron
Weight3 kg3.5 kg

Manual Pressure Test Pump Dimension:

Manual pressure test pump dimension 5 MPaManual Pressure Test Pump Operation Steps:

5 MPa manual pressure test pump operation steps

  1. Assemble the pressure test pump, check whether the main body and accessories are complete.
  2. Connect one end of oil tube to pump body. (Pay attention to seal connection and add gaskets, otherwise water will leak)
  3. Connect the other end of oil tube to the pipeline to be tested. (Be sure to wrap it with PTFE TAPE)
  4. Fill the tested pipe with water, exhaust air, then close the pressure relief valve.
  5. Fill the water tank with water, then press the handle rod up and down to start pressure test and pressurization.
  6. When the pressure gauge reading rises to the required value, pressurization can be stopped at this time.

Tips: How to Maintain a Manual Pressure Test Pump?

  • The medium in pump body and water tank should keep clean, no dirt and other debris are allowed.
  • Check the sealing points of each part for running, bubbling, dripping and leakage.
  • Avoid vibration when using pressure gauge and handle it with care.
  • Check whether the connecting bolts of each part are loose or vibration caused by looseness.
  • Check packing seal frequently and replace packing leakage in time.
  • If the manual pressure pump will not be used for a long time, drain the medium clean before stopping , apply engine oil on the unpainted exposed surface. Add anti-rust oil or engine oil to the pump. Note that when doing pressure test on oil-free containers, it is strictly prohibited to use engine oil or anti-rust oil for maintenance, other anti-corrosion measures should be taken.

Proposition 65 Warning

*WARNING: This product can expose you to chemicals, including lead, which is known to the State of California to cause birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Product reviews
Great manual pressure test pump
5
Adcock
Avatar
11/21/2022 11:01 PM
I used this manual pressure test pump today for the first time and were impressed on how well it was put together. Awesome tool at a great price! I will recommend to my friends!
Was this review helpful? Yes No (0/0)
Reliable pressure test pump
5
Edward
Avatar
6/24/2026 7:58 PM
Compact pressure test pump with simple operation and reliable performance. It works great for water pressure testing of various piping systems. The plunger runs smoothly and pressure holds steady during detection. Small size saves storage space after finishing work.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Pressure test pump is a hand operated hydraulic pump. It is a tool good for testing water pressure and sealing performance. Manual pressure test pump with high quality plastic and iron water bank. It is best for pressure vessels and PPR pipes.

Specification:

ModelATO-50K-PATO-100K-P
Working Pressure5 MPa (725 psi)10 MPa (1450 psi)
Water Absorption Frequency32 mL
Water Tank Capacity4.5L
Hose PortG1/2" (DN15, 20mm)
Overall Dimension (L*W*H)300*180*300mm
Pump Plunger Shaft Diameter35mm
Water Tank MaterialPlasticIron
Weight3 kg3.5 kg

Manual Pressure Test Pump Dimension:

Manual pressure test pump dimension 5 MPaManual Pressure Test Pump Operation Steps:

5 MPa manual pressure test pump operation steps

  1. Assemble the pressure test pump, check whether the main body and accessories are complete.
  2. Connect one end of oil tube to pump body. (Pay attention to seal connection and add gaskets, otherwise water will leak)
  3. Connect the other end of oil tube to the pipeline to be tested. (Be sure to wrap it with PTFE TAPE)
  4. Fill the tested pipe with water, exhaust air, then close the pressure relief valve.
  5. Fill the water tank with water, then press the handle rod up and down to start pressure test and pressurization.
  6. When the pressure gauge reading rises to the required value, pressurization can be stopped at this time.

Tips: How to Maintain a Manual Pressure Test Pump?

  • The medium in pump body and water tank should keep clean, no dirt and other debris are allowed.
  • Check the sealing points of each part for running, bubbling, dripping and leakage.
  • Avoid vibration when using pressure gauge and handle it with care.
  • Check whether the connecting bolts of each part are loose or vibration caused by looseness.
  • Check packing seal frequently and replace packing leakage in time.
  • If the manual pressure pump will not be used for a long time, drain the medium clean before stopping , apply engine oil on the unpainted exposed surface. Add anti-rust oil or engine oil to the pump. Note that when doing pressure test on oil-free containers, it is strictly prohibited to use engine oil or anti-rust oil for maintenance, other anti-corrosion measures should be taken.
Product reviews
Great manual pressure test pump
5
Adcock
Avatar
11/21/2022 11:01 PM
I used this manual pressure test pump today for the first time and were impressed on how well it was put together. Awesome tool at a great price! I will recommend to my friends!
Was this review helpful? Yes No (0/0)
Reliable pressure test pump
5
Edward
Avatar
6/24/2026 7:58 PM
Compact pressure test pump with simple operation and reliable performance. It works great for water pressure testing of various piping systems. The plunger runs smoothly and pressure holds steady during detection. Small size saves storage space after finishing work.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews