Manual Oil Lubrication Pump

$77.23
Manual oil lubrication pump with hand press, 500ml, optional outlet pipe diameter 4mm/ 6mm, left handle or right handle. Hand operated lube pump is piston pump, suitable for various lubrication equipment.
SKU: ATO-OLP-MYK
*
*
*
Free Shipping
Delivery date: 6-12 days

Manual oil lube pump is a piston pump, when the handle is pressed down, the oil will be sucked into the piston cavity. It can be combined with the resistance distributor to form a centralized lubrication system, which is suitable for various lubrication equipment.

Specification

ModelATO-OLP-MYK
Oil Tank Capacity500mL
Discharge Capacity3/ 4/ 5 ml/cy (Optional)
Outlet Pipe Diameterφ4mm/ φ6mm
Max Pressure4 kgf/cm2
Handle DirectionLeft/ Right
Weight0.7kg

Dimensions (Units: mm)

Dimensions of 500ml Manual Oil Lubrication Pump

Tips: The reason why gear rotation of the manual lubrication pump is not smooth?

The gear of manual lubrication pump relies on working volume change and move formed by pump cylinder and the meshing gear to pump oil. However, it sometimes appears unsmooth rotation, which will seriously affect the equipment quality. What causes gear rotation of the manual lube pump not smooth?

  • Wrong assembly. The processing datum of two pin holes on the manual lubrication pump is not the assembly datum. If you strike the pins into the two pin hole first, and then tighten the screws, the pump will not run. The correct method is to tighten the screw while rotating the gear pump.
  • Coaxiality difference between manual lubrication pump and engine coupling should be within 0.1mm.
  • The axial clearance or radial clearance is too small.
  • There is dirt in the manual lubrication pump.
  • The working oil outlet is blocked.
  • The quality of the needle sleeve is unqualified or broken.
  • All parts must be demagnetized before assembly.

The gear is one of important parts of manual lubrication pump, which determines work efficiency. Therefore, once it fails, it must be timely repaired.

Proposition 65 Warning

*WARNING: This product can expose you to chemicals, including lead, which is known to the State of California to cause birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Product reviews
Great manual oil lubrication pump.
5
Notta
Avatar
3/25/2022 1:32 AM
Super low price manual lubrication pump. Easy fill and easy to pump. The tank is big enough for me so I don’t have to fill it as often. I will buy more if I need.
Was this review helpful? Yes No (0/0)
Solid valves works well on machine tools
5
Spencer
Avatar
9/20/2026 7:40 PM
Bought two, one for the lathe, one for the mill. Both work. 4mm outlet matched my tubing. Handle can be flipped left or right, which I didn't expect. No drips yet.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Manual oil lube pump is a piston pump, when the handle is pressed down, the oil will be sucked into the piston cavity. It can be combined with the resistance distributor to form a centralized lubrication system, which is suitable for various lubrication equipment.

Specification

ModelATO-OLP-MYK
Oil Tank Capacity500mL
Discharge Capacity3/ 4/ 5 ml/cy (Optional)
Outlet Pipe Diameterφ4mm/ φ6mm
Max Pressure4 kgf/cm2
Handle DirectionLeft/ Right
Weight0.7kg

Dimensions (Units: mm)

Dimensions of 500ml Manual Oil Lubrication Pump

Tips: The reason why gear rotation of the manual lubrication pump is not smooth?

The gear of manual lubrication pump relies on working volume change and move formed by pump cylinder and the meshing gear to pump oil. However, it sometimes appears unsmooth rotation, which will seriously affect the equipment quality. What causes gear rotation of the manual lube pump not smooth?

  • Wrong assembly. The processing datum of two pin holes on the manual lubrication pump is not the assembly datum. If you strike the pins into the two pin hole first, and then tighten the screws, the pump will not run. The correct method is to tighten the screw while rotating the gear pump.
  • Coaxiality difference between manual lubrication pump and engine coupling should be within 0.1mm.
  • The axial clearance or radial clearance is too small.
  • There is dirt in the manual lubrication pump.
  • The working oil outlet is blocked.
  • The quality of the needle sleeve is unqualified or broken.
  • All parts must be demagnetized before assembly.

The gear is one of important parts of manual lubrication pump, which determines work efficiency. Therefore, once it fails, it must be timely repaired.

Product reviews
Great manual oil lubrication pump.
5
Notta
Avatar
3/25/2022 1:32 AM
Super low price manual lubrication pump. Easy fill and easy to pump. The tank is big enough for me so I don’t have to fill it as often. I will buy more if I need.
Was this review helpful? Yes No (0/0)
Solid valves works well on machine tools
5
Spencer
Avatar
9/20/2026 7:40 PM
Bought two, one for the lathe, one for the mill. Both work. 4mm outlet matched my tubing. Handle can be flipped left or right, which I didn't expect. No drips yet.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews