Thermal Dispersion Liquid Flow Switch, 24VDC/ 220VAC

$168.95
Economical price thermal dispersion liquid flow switch for sale, various lengths of sensors can be selected: 15mm, 20mm, 30mm, 40mm, 60mm. G1/2, G1/4 male thread/ M18 female thread, PNP/ NPN/ relay output signal, 6 LED lights to indicate the velocity.
SKU: ATO-RMD-F5
*
*
*
Free Shipping
Delivery date: 6-12 days

ATO liquid flow switch can measure flow velocity of different media: Water, air, oil. The accuracy is ±1 to ±10cm/s and the working pressure is 100 bar. It is the best monitoring equipment for your industrial production.

Specification

ModelATO-RMD-F5
Media typeLiquid
Measuring rangeWater 3-300cm/s, Oil 3-300cm/s
Accuracy±1 to ±10cm/s
Settling time3 minutes
Working pressure100bar
Medium temperature-20℃ to 80℃
ThreadG1/2, G1/4 Male Thread/ M18 Female Thread
Power24VDC, 110VAC, 220VAC
Output signalPNP/ NPN/ Relay
Sensor length15mm, 20mm, 30mm, 40mm, 60mm
SettingPotentiometer
Consumption current<60mA
Response time2 (2-10)s
Max. temperature gradient of medium300K/ min
ProtectReverse/ Short/ Overload
Protection gradeIp67
Power connectorM12 connector with 1m cable
MaterialSensor: ANSI316L
Body: ABS
LoadCurrent: 250mA
Relay: 30VDC/5A, 110VAC/5A, 220VAC/5A
Net weight1kg
Package typeCarton box, each flow switch is individually packaged

Thermal dispersion liquid flow switch installation diagram

Thermal dispersion flow switch installation diagram

Thermal dispersion liquid flow switch dimension diagram

Thermal dispersion liquid flow switch dimension diagram
Thermal dispersion liquid flow switch
 wiring diagram

Thermal dispersion liquid flow switch wiring diagram

Recommended collocation

Liquid flow switch recommended collocation

Details

Thermal Dispersion Liquid Flow Switch Details

Tips: How to adjust the thermal dispersion air flow switch correctly?

  1. The thermal dispersion air flow switch is adjusted near the minimum flow value when leaving the factory, and cannot be adjusted to a position lower than the ATO factory setting during use, so as not to cause the switch to fail to return to the "no liquid flow" position.
  2. If you need to increase the flow rate, you should turn the adjustment screw clockwise. After increasing the factory setting value, if you need to decrease the flow value, you can turn the adjustment screw counterclockwise.
  3. After the adjustment is over, check whether the set value of the flow switch is not lower than the factory set value, press the main lever several times, and check whether the switch has a "click" sound when the main lever returns. Turn the adjusting screw in the clock direction until the lever returns with a "click" sound.
  4. The setting screw of the sealing paint cannot be adjusted. Otherwise, once it changes, it will destroy the control of the flow switch or cause the adjustment to fail and fail to work.
  5. If the flow rate is adjusted too high, the flow direction plate will not be driven when the flow rate is low, and the thermal dispersion air flow switch will not work. If the flow rate is adjusted too low, the thermal dispersion air flow switch will be too sensitive and cause malfunction.
Product reviews
Great value!
5
Bailey
Avatar
7/19/2021 3:44 AM
This thermal dispersion liquid flow switch is truly the best switch I have ever bought. The buttons react to contact and control very well and are durable. The digital display is quite clear. I can read the data quickly and in real time. The material seems to be able to last a long time with no maintenance required. This is much more convenient and affordable than my old switch.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

ATO liquid flow switch can measure flow velocity of different media: Water, air, oil. The accuracy is ±1 to ±10cm/s and the working pressure is 100 bar. It is the best monitoring equipment for your industrial production.

Specification

ModelATO-RMD-F5
Media typeLiquid
Measuring rangeWater 3-300cm/s, Oil 3-300cm/s
Accuracy±1 to ±10cm/s
Settling time3 minutes
Working pressure100bar
Medium temperature-20℃ to 80℃
ThreadG1/2, G1/4 Male Thread/ M18 Female Thread
Power24VDC, 110VAC, 220VAC
Output signalPNP/ NPN/ Relay
Sensor length15mm, 20mm, 30mm, 40mm, 60mm
SettingPotentiometer
Consumption current<60mA
Response time2 (2-10)s
Max. temperature gradient of medium300K/ min
ProtectReverse/ Short/ Overload
Protection gradeIp67
Power connectorM12 connector with 1m cable
MaterialSensor: ANSI316L
Body: ABS
LoadCurrent: 250mA
Relay: 30VDC/5A, 110VAC/5A, 220VAC/5A
Net weight1kg
Package typeCarton box, each flow switch is individually packaged

Thermal dispersion liquid flow switch installation diagram

Thermal dispersion flow switch installation diagram

Thermal dispersion liquid flow switch dimension diagram

Thermal dispersion liquid flow switch dimension diagram
Thermal dispersion liquid flow switch
 wiring diagram

Thermal dispersion liquid flow switch wiring diagram

Recommended collocation

Liquid flow switch recommended collocation

Details

Thermal Dispersion Liquid Flow Switch Details

Tips: How to adjust the thermal dispersion air flow switch correctly?

  1. The thermal dispersion air flow switch is adjusted near the minimum flow value when leaving the factory, and cannot be adjusted to a position lower than the ATO factory setting during use, so as not to cause the switch to fail to return to the "no liquid flow" position.
  2. If you need to increase the flow rate, you should turn the adjustment screw clockwise. After increasing the factory setting value, if you need to decrease the flow value, you can turn the adjustment screw counterclockwise.
  3. After the adjustment is over, check whether the set value of the flow switch is not lower than the factory set value, press the main lever several times, and check whether the switch has a "click" sound when the main lever returns. Turn the adjusting screw in the clock direction until the lever returns with a "click" sound.
  4. The setting screw of the sealing paint cannot be adjusted. Otherwise, once it changes, it will destroy the control of the flow switch or cause the adjustment to fail and fail to work.
  5. If the flow rate is adjusted too high, the flow direction plate will not be driven when the flow rate is low, and the thermal dispersion air flow switch will not work. If the flow rate is adjusted too low, the thermal dispersion air flow switch will be too sensitive and cause malfunction.
Product reviews
Great value!
5
Bailey
Avatar
7/19/2021 3:44 AM
This thermal dispersion liquid flow switch is truly the best switch I have ever bought. The buttons react to contact and control very well and are durable. The digital display is quite clear. I can read the data quickly and in real time. The material seems to be able to last a long time with no maintenance required. This is much more convenient and affordable than my old switch.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews