Linear Scale, 300mm/12 inch, 1000mm/40 inch Stroke, 5 Micron

$219.76
High Precision digital linear scale stroke can select 250mm/10”, 400mm/16” or 800mm/32”. Resolutions 0.5 um, 1 um and 5 um. Possibility to choose the signal output and Plug type. 9 PD TTL, RS422. Pollution resistant capability is strong, good waterproof ability.
SKU: ATO-LS-WTA
*
*
*
Free Shipping
Delivery date: 6-12 days

Low cost Linear encoder resolution can select 0.5µm, 1µm or 5µm, the optional length is 350mm, 500mm and 700mm, signal output TTL or RS422. Widely applied to milling, grinding, lathe and EDM machines.
After purchasing one ATO linear scale, you can buy a digital readout for milling machine, lathes or table saw fence. 

Specification

ModelATO-LS-WTA
Resolution0.5 µm1 µm5 µm
Speed30m/min50m/min90m/min
Effective Movement Length50-1000mm, (2"-40")
Precision±(3+3L0/1000) µm (or even higher)
Output SignalTTL or RS422
Grating Pitch20 µm
RIThere is an RI every 50mm (1.9")
Nominal LengthWhen L0=50~1000mm, it is one file every 50mm
When L0=1000~3000mm, it is one file per 100mm.
Maximum Stroke Within 1000mmScale Length: 3.5m (11 feet)
Maximum Stroke Within 1000-1500mmScale Length: 5.0m (16 feet)
Maximum Stroke above 1600mmScale Length: 10m (32 feet)
Thickness29mm (1.1")
IP Rating54
Working Voltage5±0.25V
Work WasteMax, 5V, 40mA
Reserving Temperature0-50℃
Working Temperature0-40℃

Dimensions (Unit: mm)

linear scale WTA dimension

WTA

Linear Scale Output Signal

linear scale output signal

linear scale TTL interface

linear scale RS422 interface

Linear Encoder Plug Types

plug type

linear scale plug type
Tips: Linear scale working principle

Transmission grating, for example, when the indicator on the grating lines and scale on the grating lines formed between a small Angle theta, and two relative of parallel grating ruler facets, in under the irradiation of light source, is located in a nearly vertical grid lines, the formation of light and dark stripes. This stripe is called the moire stripe. Strictly speaking, the direction of the moire fringe is perpendicular to the bisector of the Angle between the two grating lines. The distance between two bright or dark lines in the moire fringe is called the width of the moire fringe, denoted by W:
W is /2 times sine of over 2, which is/over 2.

Product reviews
I would definitely recommend them
5
Teri
Avatar
10/8/2021 2:45 AM
The reason why I want to buy this linear scale is because of its powerful functions. I can use it for all kinds of machine tools and mechanical equipment to meet my various needs. It is recommended to buy it. I would definitely recommend them.
Was this review helpful? Yes No (0/0)
It works well on my mill
5
Alfredo
Avatar
4/28/2022 3:35 AM
Fast delivery. This linear scale is exactly as described in product page. It took a bit of work to plan and install. It works well on my mill. Convenient linear scale of high quality and super low price!
Was this review helpful? Yes No (0/0)
What a great grating scale kit!
5
Abe
Avatar
5/12/2022 3:33 AM
I mounted a grating ruler on my planer to help set the depth of cut and was completely happy with the results. I also bought a digital display along with it, which can be easily placed anywhere on the machine with accurate readings, which is fine for me.
Was this review helpful? Yes No (0/0)
High quality linear scale
5
Mar
Avatar
6/30/2022 3:41 AM
Unrivaled quality for the price. Love the more modern display and functionality of this linear scale. Fast delivery and service is so nice.
Was this review helpful? Yes No (0/0)
Amazing linear scale
5
Benny
Avatar
11/25/2022 2:03 AM
I am very impressed with the quality of this linear scale. It exceeded my expectations and worked great on my milling machine. I highly recommend it to anyone who needs it!
Was this review helpful? Yes No (0/0)
Linear Scale Kit
4
Luboa
Avatar
11/20/2025 7:11 PM
I would like to know if your company offers customized magnetic or optical linear scale kits. I need a set of linear scales for a lathe with the following travel dimensions: X-axis: 1500mm, Z-axis: 2000mm. I also need a dual-axis digital readout (DRO).
Was this review helpful? Yes No (0/0)
ATO Responded
1. I recommend our 2-axis Digital Readout, SKU: ATO-DR-WE68002, see spec on: https://www.ato.com/2-axis-digital-readout
2. I recommend our Linear Scale, SKU: ATO-LS-WTB. The travel of the linear scale can be customized. Please confirm that the output signal and accuracy meet your requirements, see spec on: https://www.ato.com/linear-scale-2000-mm-3200-mm
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Low cost Linear encoder resolution can select 0.5µm, 1µm or 5µm, the optional length is 350mm, 500mm and 700mm, signal output TTL or RS422. Widely applied to milling, grinding, lathe and EDM machines.
After purchasing one ATO linear scale, you can buy a digital readout for milling machine, lathes or table saw fence. 

Specification

ModelATO-LS-WTA
Resolution0.5 µm1 µm5 µm
Speed30m/min50m/min90m/min
Effective Movement Length50-1000mm, (2"-40")
Precision±(3+3L0/1000) µm (or even higher)
Output SignalTTL or RS422
Grating Pitch20 µm
RIThere is an RI every 50mm (1.9")
Nominal LengthWhen L0=50~1000mm, it is one file every 50mm
When L0=1000~3000mm, it is one file per 100mm.
Maximum Stroke Within 1000mmScale Length: 3.5m (11 feet)
Maximum Stroke Within 1000-1500mmScale Length: 5.0m (16 feet)
Maximum Stroke above 1600mmScale Length: 10m (32 feet)
Thickness29mm (1.1")
IP Rating54
Working Voltage5±0.25V
Work WasteMax, 5V, 40mA
Reserving Temperature0-50℃
Working Temperature0-40℃

Dimensions (Unit: mm)

linear scale WTA dimension

WTA

Linear Scale Output Signal

linear scale output signal

linear scale TTL interface

linear scale RS422 interface

Linear Encoder Plug Types

plug type

linear scale plug type
Tips: Linear scale working principle

Transmission grating, for example, when the indicator on the grating lines and scale on the grating lines formed between a small Angle theta, and two relative of parallel grating ruler facets, in under the irradiation of light source, is located in a nearly vertical grid lines, the formation of light and dark stripes. This stripe is called the moire stripe. Strictly speaking, the direction of the moire fringe is perpendicular to the bisector of the Angle between the two grating lines. The distance between two bright or dark lines in the moire fringe is called the width of the moire fringe, denoted by W:
W is /2 times sine of over 2, which is/over 2.

Product reviews
I would definitely recommend them
5
Teri
Avatar
10/8/2021 2:45 AM
The reason why I want to buy this linear scale is because of its powerful functions. I can use it for all kinds of machine tools and mechanical equipment to meet my various needs. It is recommended to buy it. I would definitely recommend them.
Was this review helpful? Yes No (0/0)
It works well on my mill
5
Alfredo
Avatar
4/28/2022 3:35 AM
Fast delivery. This linear scale is exactly as described in product page. It took a bit of work to plan and install. It works well on my mill. Convenient linear scale of high quality and super low price!
Was this review helpful? Yes No (0/0)
What a great grating scale kit!
5
Abe
Avatar
5/12/2022 3:33 AM
I mounted a grating ruler on my planer to help set the depth of cut and was completely happy with the results. I also bought a digital display along with it, which can be easily placed anywhere on the machine with accurate readings, which is fine for me.
Was this review helpful? Yes No (0/0)
High quality linear scale
5
Mar
Avatar
6/30/2022 3:41 AM
Unrivaled quality for the price. Love the more modern display and functionality of this linear scale. Fast delivery and service is so nice.
Was this review helpful? Yes No (0/0)
Amazing linear scale
5
Benny
Avatar
11/25/2022 2:03 AM
I am very impressed with the quality of this linear scale. It exceeded my expectations and worked great on my milling machine. I highly recommend it to anyone who needs it!
Was this review helpful? Yes No (0/0)
Linear Scale Kit
4
Luboa
Avatar
11/20/2025 7:11 PM
I would like to know if your company offers customized magnetic or optical linear scale kits. I need a set of linear scales for a lathe with the following travel dimensions: X-axis: 1500mm, Z-axis: 2000mm. I also need a dual-axis digital readout (DRO).
Was this review helpful? Yes No (0/0)
ATO Responded
1. I recommend our 2-axis Digital Readout, SKU: ATO-DR-WE68002, see spec on: https://www.ato.com/2-axis-digital-readout
2. I recommend our Linear Scale, SKU: ATO-LS-WTB. The travel of the linear scale can be customized. Please confirm that the output signal and accuracy meet your requirements, see spec on: https://www.ato.com/linear-scale-2000-mm-3200-mm
Only registered users can write reviews