Solar Tracker Linear Actuator, 12V/24V, 8000N, 400mm Stroke

$687.29
12V, 24V DC heavy duty linear actuator for solar tracker system, 8000N maximum load capacity and the max. static load up to 20000N, default 400mm stroke, other strokes are customizable. IP65 protection grade, duty cycle of 10%, more reliable in the long term.
SKU: ATO-LACTU-8000
*
*
*
Free Shipping
Delivery date: 6-12 days

8000N load solar tracker linear actuator is small and compact unit, 12 volt / 24 volt DC voltage, 300mm, 400mm 450mm...strokes customized. With strong stability, strong structural design, waterproof and dustproof, suitable for harsh environment.

Parameter List

ModelATO-U4
Voltage12V DC, 24V DC, 36V DC, 48V DC (Optional)
Max. Load8000N
Max. Static Load20000N
No-Load Speed2.7mm/s
Full-Load Speed1-1.5mm/s
Power77W
Rated Speed2600RPM
Stroke50/ 100/ 150/ 200/ 250/ 300/ 350/ 400/ 450mm (Optional, can be customized)
Continuous Current2.2-3.2A
Duty Cycle10%
IP GradeIP65
Ambient Temperature-25℃ ~ +65℃
Position FeedbackReed sensor
Noise<60db
Front-Rear End DimensionRod type Φ16mm
Installation DimensionStroke + 350mm
ConnectorTinned leads
Length of Cable1m
Weight11kg
ApplicationsSmall and medium sized solar tracker system

Load and Speed Selection

(Note: The current at 12V is as roughly 2 times as that at 24V)

CodeRated Load (N)Rated Current (A)Rated Speed (mm/s)
PushPullNo Load (32V DC)Full Load (24V DC)
A800080003.22.71
B600060002.22.71.5

Stroke and Size Selection

Stroke±2 (mm), Mounting Dimension±2 (mm)
Stroke50100150200250300350400450
Size400450500550600650700750800

Standard Dimension (mm)

8000N linear actuator dimensions

Proposition 65 Warning

*WARNING: This product can expose you to chemicals, including lead, which is known to the State of California to cause birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Product reviews
Limitations of linear actuators
5
Pinker
Avatar
6/17/2021 3:14 AM
Does the hall sensor option for your linear actuator allow you to set limits for adjusting stroke length?
Was this review helpful? Yes No (1/0)
ATO Responded
The hall sensor of the linear actuator can be used as a position signal output. This signal can be used to determine the position of the push rod for the synchronous expansion and contraction of the two push rods.
I am looking for a linear actuator
5
Rubark
Avatar
9/17/2021 8:49 PM
Looking for a small linear actuator with feedback, preferably with 15v or 4-20mA. 1-5 volt signal or 4-20ma signal.
Was this review helpful? Yes No (0/0)
ATO Responded
SKU: ATO-LACTU-1200 // Model: ATOHTA15
Unfortunately, it can only feedback with Hall signal output but not 1-5 volt / 4-20mA signals.
We are looking for linear actuators.
5
Vallen
Avatar
1/19/2022 8:54 PM
We are looking for a linear stepper motor actuator that can run a syringe pump. The maximum load is about 3.5Kg (axial). We need the linear speed to be between 15mm/sec to 2.5mm/sec.
Was this review helpful? Yes No (0/0)
ATO Responded
You can use Nema 17 or Nema 23 stepper motor linear actuator, just specify the diameter of the motor screw lead and the thread pitch.
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

8000N load solar tracker linear actuator is small and compact unit, 12 volt / 24 volt DC voltage, 300mm, 400mm 450mm...strokes customized. With strong stability, strong structural design, waterproof and dustproof, suitable for harsh environment.

Parameter List

ModelATO-U4
Voltage12V DC, 24V DC, 36V DC, 48V DC (Optional)
Max. Load8000N
Max. Static Load20000N
No-Load Speed2.7mm/s
Full-Load Speed1-1.5mm/s
Power77W
Rated Speed2600RPM
Stroke50/ 100/ 150/ 200/ 250/ 300/ 350/ 400/ 450mm (Optional, can be customized)
Continuous Current2.2-3.2A
Duty Cycle10%
IP GradeIP65
Ambient Temperature-25℃ ~ +65℃
Position FeedbackReed sensor
Noise<60db
Front-Rear End DimensionRod type Φ16mm
Installation DimensionStroke + 350mm
ConnectorTinned leads
Length of Cable1m
Weight11kg
ApplicationsSmall and medium sized solar tracker system

Load and Speed Selection

(Note: The current at 12V is as roughly 2 times as that at 24V)

CodeRated Load (N)Rated Current (A)Rated Speed (mm/s)
PushPullNo Load (32V DC)Full Load (24V DC)
A800080003.22.71
B600060002.22.71.5

Stroke and Size Selection

Stroke±2 (mm), Mounting Dimension±2 (mm)
Stroke50100150200250300350400450
Size400450500550600650700750800

Standard Dimension (mm)

8000N linear actuator dimensions

Product reviews
Limitations of linear actuators
5
Pinker
Avatar
6/17/2021 3:14 AM
Does the hall sensor option for your linear actuator allow you to set limits for adjusting stroke length?
Was this review helpful? Yes No (1/0)
ATO Responded
The hall sensor of the linear actuator can be used as a position signal output. This signal can be used to determine the position of the push rod for the synchronous expansion and contraction of the two push rods.
I am looking for a linear actuator
5
Rubark
Avatar
9/17/2021 8:49 PM
Looking for a small linear actuator with feedback, preferably with 15v or 4-20mA. 1-5 volt signal or 4-20ma signal.
Was this review helpful? Yes No (0/0)
ATO Responded
SKU: ATO-LACTU-1200 // Model: ATOHTA15
Unfortunately, it can only feedback with Hall signal output but not 1-5 volt / 4-20mA signals.
We are looking for linear actuators.
5
Vallen
Avatar
1/19/2022 8:54 PM
We are looking for a linear stepper motor actuator that can run a syringe pump. The maximum load is about 3.5Kg (axial). We need the linear speed to be between 15mm/sec to 2.5mm/sec.
Was this review helpful? Yes No (0/0)
ATO Responded
You can use Nema 17 or Nema 23 stepper motor linear actuator, just specify the diameter of the motor screw lead and the thread pitch.
Only registered users can write reviews