Laser Distance Sensor, 30-100mm

$1,047.14
Low cost laser distance sensor online for sales, laser spot size 1mm*3mm, measuring range 30-100mm, protection class IP67, 650nm red laser, it can be used in reel production monitor, solar panel warpage measurement, control movement of robot arm, small pack missing detection.
SKU: ATO-LDS-PDACC10
*
Free Shipping
Delivery date: 6-12 days

Features

  • Exquisite appearance and light aluminum housing, easy to mount and dismount.
  • Convenient operation panel with visualized OLED display to complete all function settings fastly.
  • Small diameter light spot to accurately measure very tiny objects.
  • Key or remote teach-in to easily set response time for different applications.
  • Powerful function setting and flexible output way.
  • Complete shielded desgin, stronger anti-interference perfomance.
  • IP67 protection degree, able to work in water or dusty environment. 

Specification

Model ATO-PDA-CC10DGR ATO-PDA-CC10TGI
Linear Accuracy ±0.3% F.S ±0.4% F.S
Supply Voltage 10-30V DC 12-24V DC
Output Signal RS-485 (Support Modbus protocol) 4...20mA (Load resistance<390Ω)
Connection 2m 5-pins/ 4-pins PVC Cable 4-pin: analog output
Light Source Red laser (650nm)
Laser Class  Class 2
Spot Diameter 1mm*3mm@100mm
Measuring Range 30-100mm
Resolution 15um@80mm; 500@500mm
Repeated Accuracy  30um@80mm; 250um@250um; 1000um@500mm
Voltage Drop <2.5V
Power Consumption ≤ 700mW
Load Current 200mA
Circuit Protection Short circuit, reverse polarity, overload protection
Ambient Temperature -10-50℃
Temperature Drift ±0.02%  F.S./℃
Response Time 2ms/ 16ms/ 40ms (configurable)
Ambient Humidity 35-85% RH (No condensation)
Anti-ambient Light Incandescent light: <3,000lux
Impluse Withstand 500m/s² (About 50G)3 times each in X, Y, Z directions
Vibration Resistance 10-55Hz Double amplitude 1mm, 2h each in X, Y, Z directions
Protection Degree  IP67
Material Housing: Aluminum; Lens cover: PMMA; Display panel: PC
Accessory
Screw (M4×35mm)×2, Nut×2, Washer×2, Mounting bracket, Operation manual
Dimension 65*51*23mm
Certificates CE, UL, CCC, ROHS
Warranty 12 months

Remark:
①Test conditions: Standard data at 23 ± 5 ℃; Supply voltage 24V DC; 30 minutes' warmup before test; Sampling period 2ms; Average sampling times 100; Standard sensing object 90% white card.
②The statistical data follows the 3σ criteria
③Repeat accuracy: 23 ± 5 ℃ environment, 90% reflectivity white card,100 test data results.
④Slave address,baud rate setting only for RS-485 series.
⑤Protecion circuit only for switch output.

Dimension (unit=mm)

Dimension of laser distance sensor

Accessory Dimension

Accessory dimension of laser distance sensor

Wiring diagram

Wiring diagram of laser distance sensor

Remark:
The sensors are equipped with shielded cables, Q is the switch output.
RS-485 output: The black and white lines A and B must not be reversed and A and B cannot be short-circuited with the power line "﹢, -".
Analog output: The gray line Ia cannot be short-circuited with the power line "﹢, -". There is a small shielded wire, which shall not be in short-circuit connection with the analog output wire, but recommended to be grounded or not grounded.

Installation of laser distance sensor

Installation of laser distance sensor

Tips: Working Principle of Laser Distance Sensor.

When the laser distance sensor is working during the transmission time, the laser diode is first aimed at the target and emits laser pulses. The laser light is scattered in all directions after being reflected by the target. Part of the scattered light returns to the sensor receiver and is imaged on the avalanche photodiode after being received by the optical system. The avalanche photodiode is an optical sensor with an internal amplification function, so it can detect extremely weak light signals. Record and process the elapsed time from when the light pulse is sent to when it is received, and then the distance to the target can be determined. Transit time Laser sensors must measure the transit time extremely accurately because the speed of light is too fast.

In this video, ATO will show you top ten most used sensors (sensing technologies).

How to Connect Photoelectric Sensors to PLC?

This video introduces the connection method of photoelectric sensors to PLC. Whether it is a photoelectric sensor, proximity sensor or laser switch, their wiring principles are similar. We can use its output signal to control the intermediate relay, or we can input the signal to the PLC for logic control.

How Do Laser Sensor/Switch Work with Relay?

This video shows an example of how laser sensors/switches work with relays. Photoelectric switches, proximity switches or laser sensors are often used as PLC input signals and relay coil controls.

Product reviews
Perfect laser distance sensor
5
Joey
Avatar
7/26/2021 12:20 AM
The laser distance sensor is very good. I was a little bit worried at the beginning but it could be used outdoor during the day and has no problem. It has all of the functions that I need. No need to see many information, I can tell how to turn on and start measuring in the quickest way. This lase sensor is probably superior to the rest brands laser measures.
Was this review helpful? Yes No (0/0)
Laser sensor work
5
marge
Avatar
2/3/2023 1:43 AM
Does beam type sensor work without reflector?
Was this review helpful? Yes No (0/0)
ATO Responded
The two switches of the through beam type laser sensor are respectively installed at both ends of the edge of the monitored object, and the two switches are opposite to each other. So the through beam type does not need a reflector.
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Features

  • Exquisite appearance and light aluminum housing, easy to mount and dismount.
  • Convenient operation panel with visualized OLED display to complete all function settings fastly.
  • Small diameter light spot to accurately measure very tiny objects.
  • Key or remote teach-in to easily set response time for different applications.
  • Powerful function setting and flexible output way.
  • Complete shielded desgin, stronger anti-interference perfomance.
  • IP67 protection degree, able to work in water or dusty environment. 

Specification

Model ATO-PDA-CC10DGR ATO-PDA-CC10TGI
Linear Accuracy ±0.3% F.S ±0.4% F.S
Supply Voltage 10-30V DC 12-24V DC
Output Signal RS-485 (Support Modbus protocol) 4...20mA (Load resistance<390Ω)
Connection 2m 5-pins/ 4-pins PVC Cable 4-pin: analog output
Light Source Red laser (650nm)
Laser Class  Class 2
Spot Diameter 1mm*3mm@100mm
Measuring Range 30-100mm
Resolution 15um@80mm; 500@500mm
Repeated Accuracy  30um@80mm; 250um@250um; 1000um@500mm
Voltage Drop <2.5V
Power Consumption ≤ 700mW
Load Current 200mA
Circuit Protection Short circuit, reverse polarity, overload protection
Ambient Temperature -10-50℃
Temperature Drift ±0.02%  F.S./℃
Response Time 2ms/ 16ms/ 40ms (configurable)
Ambient Humidity 35-85% RH (No condensation)
Anti-ambient Light Incandescent light: <3,000lux
Impluse Withstand 500m/s² (About 50G)3 times each in X, Y, Z directions
Vibration Resistance 10-55Hz Double amplitude 1mm, 2h each in X, Y, Z directions
Protection Degree  IP67
Material Housing: Aluminum; Lens cover: PMMA; Display panel: PC
Accessory
Screw (M4×35mm)×2, Nut×2, Washer×2, Mounting bracket, Operation manual
Dimension 65*51*23mm
Certificates CE, UL, CCC, ROHS
Warranty 12 months

Remark:
①Test conditions: Standard data at 23 ± 5 ℃; Supply voltage 24V DC; 30 minutes' warmup before test; Sampling period 2ms; Average sampling times 100; Standard sensing object 90% white card.
②The statistical data follows the 3σ criteria
③Repeat accuracy: 23 ± 5 ℃ environment, 90% reflectivity white card,100 test data results.
④Slave address,baud rate setting only for RS-485 series.
⑤Protecion circuit only for switch output.

Dimension (unit=mm)

Dimension of laser distance sensor

Accessory Dimension

Accessory dimension of laser distance sensor

Wiring diagram

Wiring diagram of laser distance sensor

Remark:
The sensors are equipped with shielded cables, Q is the switch output.
RS-485 output: The black and white lines A and B must not be reversed and A and B cannot be short-circuited with the power line "﹢, -".
Analog output: The gray line Ia cannot be short-circuited with the power line "﹢, -". There is a small shielded wire, which shall not be in short-circuit connection with the analog output wire, but recommended to be grounded or not grounded.

Installation of laser distance sensor

Installation of laser distance sensor

Tips: Working Principle of Laser Distance Sensor.

When the laser distance sensor is working during the transmission time, the laser diode is first aimed at the target and emits laser pulses. The laser light is scattered in all directions after being reflected by the target. Part of the scattered light returns to the sensor receiver and is imaged on the avalanche photodiode after being received by the optical system. The avalanche photodiode is an optical sensor with an internal amplification function, so it can detect extremely weak light signals. Record and process the elapsed time from when the light pulse is sent to when it is received, and then the distance to the target can be determined. Transit time Laser sensors must measure the transit time extremely accurately because the speed of light is too fast.

Product reviews
Perfect laser distance sensor
5
Joey
Avatar
7/26/2021 12:20 AM
The laser distance sensor is very good. I was a little bit worried at the beginning but it could be used outdoor during the day and has no problem. It has all of the functions that I need. No need to see many information, I can tell how to turn on and start measuring in the quickest way. This lase sensor is probably superior to the rest brands laser measures.
Was this review helpful? Yes No (0/0)
Laser sensor work
5
marge
Avatar
2/3/2023 1:43 AM
Does beam type sensor work without reflector?
Was this review helpful? Yes No (0/0)
ATO Responded
The two switches of the through beam type laser sensor are respectively installed at both ends of the edge of the monitored object, and the two switches are opposite to each other. So the through beam type does not need a reflector.
Only registered users can write reviews