Joystick Switch, 4 way

$32.86
Joystick switch at affordable price, which with 150V/ 250V/ 600V rated voltage, 15A/ 10A/ 4A rated current, 30mm hole diameter. The switch has 4NO/ 8NO 4-way automatic resetting two types for selection. Joystick switch has the advantages of strong shock resistance, convenient operation and long service life.
SKU: ATO-JS-HKA1
*
This product has a minimum quantity of 3
Free Shipping
Delivery date: 6-12 days

Lower price joystick switch with 10-15A operating current, 5-20N operating pressure. The switch is widely used in factory equipment, instrumentation, marine equipment, medical equipment, CNC lathes, and oil extraction.

Specification

ModelATO-HKA1-41ATO-HKA1-42
Type4 way automatic resetting/ 4NO4 way automatic resetting/ 8NO
Rated voltage150V/ 250V/ 600V
Rated current15A/ 10A/ 4A
Hole diameter30mm
Operating current10-15A
ContactNO
Insulation voltage600V
Insulation resistance100MΩ
Operating pressure5-20N
Contact resistance200Ω
Operating temperature0℃~85 ℃
Operation methodEmergency
Installation size22mm
Panel thickness2-5mm
Reset methodManual control
CertificateCCC
Warranty12 months

Dimension (mm)

Joystick switch dimension

Tips: Conditions of Using Joystick Switch.

1. Atmospheric conditions

  1. Humidity: The relative humidity of the air at the installation site does not exceed 50% when the highest temperature is +40℃, and it can have a higher relative humidity at a lower temperature. The monthly average temperature of the wettest month does not exceed +25℃, and the monthly average of the month The maximum relative humidity does not exceed 90%. Measures must be taken for condensation on the product due to temperature changes.
  2. Pollution degree: The pollution level of the master switch is specified as "Pollution Level 3", unless the specific product standard specifies otherwise or only after effective use of the shell, protective coating or sealing method, it may be reduced to "Pollution Level 2". It depends on the special purpose or micro-environment of the master switch.

2. Vibration

The switch should be able to work under vibration conditions with a frequency of 10 to 55 Hz and an amplitude of 0.75 mm (10 g).

Product reviews
Perfect joystick switch!
5
Angel
Avatar
4/15/2022 1:21 AM
These replacement joysticks worked perfectly for my launch switch. Maybe you could find a better value out there, but since I only needed to replace joysticks on one switch. Highly recommend it!
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Lower price joystick switch with 10-15A operating current, 5-20N operating pressure. The switch is widely used in factory equipment, instrumentation, marine equipment, medical equipment, CNC lathes, and oil extraction.

Specification

ModelATO-HKA1-41ATO-HKA1-42
Type4 way automatic resetting/ 4NO4 way automatic resetting/ 8NO
Rated voltage150V/ 250V/ 600V
Rated current15A/ 10A/ 4A
Hole diameter30mm
Operating current10-15A
ContactNO
Insulation voltage600V
Insulation resistance100MΩ
Operating pressure5-20N
Contact resistance200Ω
Operating temperature0℃~85 ℃
Operation methodEmergency
Installation size22mm
Panel thickness2-5mm
Reset methodManual control
CertificateCCC
Warranty12 months

Dimension (mm)

Joystick switch dimension

Tips: Conditions of Using Joystick Switch.

1. Atmospheric conditions

  1. Humidity: The relative humidity of the air at the installation site does not exceed 50% when the highest temperature is +40℃, and it can have a higher relative humidity at a lower temperature. The monthly average temperature of the wettest month does not exceed +25℃, and the monthly average of the month The maximum relative humidity does not exceed 90%. Measures must be taken for condensation on the product due to temperature changes.
  2. Pollution degree: The pollution level of the master switch is specified as "Pollution Level 3", unless the specific product standard specifies otherwise or only after effective use of the shell, protective coating or sealing method, it may be reduced to "Pollution Level 2". It depends on the special purpose or micro-environment of the master switch.

2. Vibration

The switch should be able to work under vibration conditions with a frequency of 10 to 55 Hz and an amplitude of 0.75 mm (10 g).

Product reviews
Perfect joystick switch!
5
Angel
Avatar
4/15/2022 1:21 AM
These replacement joysticks worked perfectly for my launch switch. Maybe you could find a better value out there, but since I only needed to replace joysticks on one switch. Highly recommend it!
Was this review helpful? Yes No (0/0)
Only registered users can write reviews