3D Gyroscope Sensor, 9 Axis, Acceleration/ Angular Velocity/ Angle

$653.88
High-performance 9-axis 3D gyroscope sensor with three measurement functions of acceleration, angular velocity and angle, supporting X/Y/Z axis data, with a wide range of measurement (angle ±180°, acceleration ±2~16g, angular velocity ±50~2000°/s) is optional.
SKU: ATO-GS-9-AXIS
*
*
*
Free Shipping
Delivery date: 6-12 days

High-precision industrial grade gyro sensor provides ultra-high resolution with bandwidth (>1000Hz) and short start-up time of only 0.5 seconds.Support multi-frequency automatic output, using RS232/RS485/RS422/TTL signal output methods, adapt to a wide range of industrial applications. Wide operating voltage, low power consumption, long life.

Specification

ModelATO-ML7600-3-D
Measuring AxialX/Y/Z axis
Measuring RangeAngle: ±180°
Acceleration: ±2/4/8/16g
Angular velocity: ±50/150/300/450/1200/2000°/s
Acquisition Band Width>1000Hz
ResolutionAngle: ±0.01°/S
Acceleration: ±0.001g
Angular velocity: ±0.005°/s
Temperature CompensationFull temperature range,-45℃~85℃
Power-on Startup Time0.5s
Auto Output Rate5Hz output, 15Hz, 35Hz, 50Hz can be set (RS485 without this function)
Output SignalRS232/RS485/RS422/TTL
Average Trouble-Free Operating Time≥45000 hours/time
Negative Tenderness20000g, 2ms, 1/2sine
Vibration Resistant10grms, 10~1000HZ
Waterproof RatingIP67
CableStandard 1.5 meters length, wear-resistant, oil-resistant, wide temperature, shielded cable 5*0.2mm2
Connector6-pin aviation plug
Tolerance Load1000
Operating Voltage9~36V
Operating Current40mA
Operating Temperature-40℃~85℃
Storage Temperature-55℃~125℃
ConnectorLead wire (1.5m) or waterproof aviation socket
Housing MaterialAluminum alloy sandblasted oxidation
MountingFour M4 screws
Dimensions60*59*29mm
Net Weight180g


Dimensional Drawing (unit: mm)

9 axis gyroscope sensor size

Axis Direction

9 axis gyroscope sensor axis direction

9 axis gyroscope sensor other directions

Wiring Drawing

9 axis gyroscope sensor wiring drawing

Applications

9 axis gyroscope sensor applications

Tips: How do I process 9-axis sensor data to improve accuracy?

The following steps are typically required to optimize data accuracy:

  1. Calibration: Calibrate sensors for acceleration, angular velocity, and magnetic field after initial use and long-term operation.
  2. Sensor Fusion: Integration of multi-axis data using filtering algorithms such as Kalman filtering or complementary filtering to reduce noise and drift.
  3. Temperature Compensation: Prevents changes in ambient temperature from affecting measurement data.

The above methods can significantly improve the reliability and stability of sensors in complex application scenarios.

Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

High-precision industrial grade gyro sensor provides ultra-high resolution with bandwidth (>1000Hz) and short start-up time of only 0.5 seconds.Support multi-frequency automatic output, using RS232/RS485/RS422/TTL signal output methods, adapt to a wide range of industrial applications. Wide operating voltage, low power consumption, long life.

Specification

ModelATO-ML7600-3-D
Measuring AxialX/Y/Z axis
Measuring RangeAngle: ±180°
Acceleration: ±2/4/8/16g
Angular velocity: ±50/150/300/450/1200/2000°/s
Acquisition Band Width>1000Hz
ResolutionAngle: ±0.01°/S
Acceleration: ±0.001g
Angular velocity: ±0.005°/s
Temperature CompensationFull temperature range,-45℃~85℃
Power-on Startup Time0.5s
Auto Output Rate5Hz output, 15Hz, 35Hz, 50Hz can be set (RS485 without this function)
Output SignalRS232/RS485/RS422/TTL
Average Trouble-Free Operating Time≥45000 hours/time
Negative Tenderness20000g, 2ms, 1/2sine
Vibration Resistant10grms, 10~1000HZ
Waterproof RatingIP67
CableStandard 1.5 meters length, wear-resistant, oil-resistant, wide temperature, shielded cable 5*0.2mm2
Connector6-pin aviation plug
Tolerance Load1000
Operating Voltage9~36V
Operating Current40mA
Operating Temperature-40℃~85℃
Storage Temperature-55℃~125℃
ConnectorLead wire (1.5m) or waterproof aviation socket
Housing MaterialAluminum alloy sandblasted oxidation
MountingFour M4 screws
Dimensions60*59*29mm
Net Weight180g


Dimensional Drawing (unit: mm)

9 axis gyroscope sensor size

Axis Direction

9 axis gyroscope sensor axis direction

9 axis gyroscope sensor other directions

Wiring Drawing

9 axis gyroscope sensor wiring drawing

Applications

9 axis gyroscope sensor applications

Tips: How do I process 9-axis sensor data to improve accuracy?

The following steps are typically required to optimize data accuracy:

  1. Calibration: Calibrate sensors for acceleration, angular velocity, and magnetic field after initial use and long-term operation.
  2. Sensor Fusion: Integration of multi-axis data using filtering algorithms such as Kalman filtering or complementary filtering to reduce noise and drift.
  3. Temperature Compensation: Prevents changes in ambient temperature from affecting measurement data.

The above methods can significantly improve the reliability and stability of sensors in complex application scenarios.

Only registered users can write reviews