Gas Mass Flow Meter, Air/H2/N2/O2/CO2, 0~50/120/300/800L/min

$2,046.79
Affordable price gas mass flow meter. Rating pressure 1.5 MPa, flow range 0~50/120/300/800L/min for selection, output signal 4-20mA/RS485/pulse 0~5VDC, power supply DC 8~24V, working current 50mA. Small gas flow meter with digital display, applicable gas air, hydrogen (H2), nitrogen (N2), oxygen (O2), Argon, carbon dioxide (CO2), etc.
SKU: ATO-FLOW-MF5000
*
*
*
Free Shipping
Delivery date: 10-20 days

Gas mass flow meter for high flow measurement. Optional flow range 0~50/120/300/800L/min, working pressure 1.5 MPa, output signal 4-20mA/RS485/pulse 0~5VDC for selection, explosion proof type is available. Suitable gas air, hydrogen (H2), nitrogen (N2), oxygen (O2), Argon, carbon dioxide (CO2).

Specification

ModelATO-MF5000
Flow Range (optional)0~15 L/min
0~50 L/min
0~120 L/min
0~300 L/min
0~800 L/min
Applicable Gas (optional)Air
Hydrogen (H2)
Nitrogen (N2)
Oxygen (O2)
Argon (Ar)
Carbon Dioxide (CO2)
Methane (CH4)
Accuracy± (1.5 + 0.5 F.S.)%
Repeatability0.5%
Power SupplyDC 8~24V (50mA)
Output Signal (optional)4-20mA, RS485, pulse 0~5VDC
Pressure Rating1.5 MPa
Working Temperature-20°C~60°C
Humidity<95% RH (no condensation)
Pin-outDB9
CalibrationAir @ 2°C, 101.325 kPa
Hazardous RatingExiaIICT4


Gas Mass Flow Meter Dimension (unit: mm)

Dimensions of Gas Mass Flow Meter, 0~50/120/300/800L/min

Flow RangeDNDLHH1WdC
0~15 L/min3.01/8 inch1181442838Ф 336
0~50 L/min6.01/4 inch1241442838Ф 636
0~120 L/min8.03/8 inch1241513538Ф 850
0~300 L/min12.01/2 inch1501564040Ф 1250
0~800 L/min19.03/4 inch1821564040Ф 1970


Detail

Detail of gas mass flow meter

Working Principle

Working principle of gas mass flow meter

The MEMS calorimetric sensor is installed at the flow channel wall forming a plate that serves as anadditional flow conditioner from the boundary laver configuration resulting in a laminar flow, The massflow measurement is established as the fluid carries heat away from the heater causing the redistribution ofthe temperature field. Accurate flow rate is obtained by calibration with the standard fluid at the presetconditions.

Tips: How to choose the right gas mass flow meter?

When choosing a gas mass flow meter, the following factors need to be considered:

  • First is the measuring range, to ensure that the flow meter can cover the range of the actual gas flow.
  • Second is the type of gas. Differences in the density of different gases may affect the measurement accuracy, so you need to confirm the type of gas that the flow meter is adapted to when choosing.
  • Finally, the installation location of the device and the environmental conditions are also very important, especially the temperature, pressure and the humidity of the gas, which may affect the performance of the gas flow meter. After understanding these needs, you can choose the right brand and model.
Product reviews
Application of flow meter
5
Mary
Avatar
9/22/2021 9:12 PM
We are looking to measure tile drainage outflow velocity. Pipe size varies from 4 to 24 inches with water levels ranging from 0.25 to 4 inches. Would this product be able to measure this low amount of water?
Was this review helpful? Yes No (0/0)
ATO Responded
SKU: ATO-FLOW-2000 > > Portable Clamp-On Ultrasonic Flow Meter for Water
See specs, price, and you can order online by credit card at: https://www.ato.com/ultrasonic-flow-meter
Unfortunately, this flow meter can only measure water flow when the pipe is full.
Do you have any digital gas meter for hydrogen gas 0-10L/min?
5
vivian
Avatar
6/7/2023 1:32 AM
Hello, do you have any digital gas flow meter for hydrogen gas 0-10L/min.  
Just need to see what the flow is. No need for explosion proof but chemical resistance will be great.
Was this review helpful? Yes No (0/0)
ATO Responded
Because the medium is hydrogen, we recommend using the explosion-proof flow meter ATO-FLOW-MF5000, which needs to select the explosion-proof option on the page, with a range of 0-15L/min.
Flow meter
5
Velhem
Avatar
7/9/2024 2:39 AM
We produce hydrogen with trace amounts of sodium hydroxide and need a flow meter that can handle our flow rate of 0-5 L/min.
Was this review helpful? Yes No (0/0)
ATO Responded
You can choose our ATO-FLOW-MF5000 flow meter, with a range of 0-15L/min.
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Gas mass flow meter for high flow measurement. Optional flow range 0~50/120/300/800L/min, working pressure 1.5 MPa, output signal 4-20mA/RS485/pulse 0~5VDC for selection, explosion proof type is available. Suitable gas air, hydrogen (H2), nitrogen (N2), oxygen (O2), Argon, carbon dioxide (CO2).

Specification

ModelATO-MF5000
Flow Range (optional)0~15 L/min
0~50 L/min
0~120 L/min
0~300 L/min
0~800 L/min
Applicable Gas (optional)Air
Hydrogen (H2)
Nitrogen (N2)
Oxygen (O2)
Argon (Ar)
Carbon Dioxide (CO2)
Methane (CH4)
Accuracy± (1.5 + 0.5 F.S.)%
Repeatability0.5%
Power SupplyDC 8~24V (50mA)
Output Signal (optional)4-20mA, RS485, pulse 0~5VDC
Pressure Rating1.5 MPa
Working Temperature-20°C~60°C
Humidity<95% RH (no condensation)
Pin-outDB9
CalibrationAir @ 2°C, 101.325 kPa
Hazardous RatingExiaIICT4


Gas Mass Flow Meter Dimension (unit: mm)

Dimensions of Gas Mass Flow Meter, 0~50/120/300/800L/min

Flow RangeDNDLHH1WdC
0~15 L/min3.01/8 inch1181442838Ф 336
0~50 L/min6.01/4 inch1241442838Ф 636
0~120 L/min8.03/8 inch1241513538Ф 850
0~300 L/min12.01/2 inch1501564040Ф 1250
0~800 L/min19.03/4 inch1821564040Ф 1970


Detail

Detail of gas mass flow meter

Working Principle

Working principle of gas mass flow meter

The MEMS calorimetric sensor is installed at the flow channel wall forming a plate that serves as anadditional flow conditioner from the boundary laver configuration resulting in a laminar flow, The massflow measurement is established as the fluid carries heat away from the heater causing the redistribution ofthe temperature field. Accurate flow rate is obtained by calibration with the standard fluid at the presetconditions.

Tips: How to choose the right gas mass flow meter?

When choosing a gas mass flow meter, the following factors need to be considered:

  • First is the measuring range, to ensure that the flow meter can cover the range of the actual gas flow.
  • Second is the type of gas. Differences in the density of different gases may affect the measurement accuracy, so you need to confirm the type of gas that the flow meter is adapted to when choosing.
  • Finally, the installation location of the device and the environmental conditions are also very important, especially the temperature, pressure and the humidity of the gas, which may affect the performance of the gas flow meter. After understanding these needs, you can choose the right brand and model.
Product reviews
Application of flow meter
5
Mary
Avatar
9/22/2021 9:12 PM
We are looking to measure tile drainage outflow velocity. Pipe size varies from 4 to 24 inches with water levels ranging from 0.25 to 4 inches. Would this product be able to measure this low amount of water?
Was this review helpful? Yes No (0/0)
ATO Responded
SKU: ATO-FLOW-2000 > > Portable Clamp-On Ultrasonic Flow Meter for Water
See specs, price, and you can order online by credit card at: https://www.ato.com/ultrasonic-flow-meter
Unfortunately, this flow meter can only measure water flow when the pipe is full.
Do you have any digital gas meter for hydrogen gas 0-10L/min?
5
vivian
Avatar
6/7/2023 1:32 AM
Hello, do you have any digital gas flow meter for hydrogen gas 0-10L/min.  
Just need to see what the flow is. No need for explosion proof but chemical resistance will be great.
Was this review helpful? Yes No (0/0)
ATO Responded
Because the medium is hydrogen, we recommend using the explosion-proof flow meter ATO-FLOW-MF5000, which needs to select the explosion-proof option on the page, with a range of 0-15L/min.
Flow meter
5
Velhem
Avatar
7/9/2024 2:39 AM
We produce hydrogen with trace amounts of sodium hydroxide and need a flow meter that can handle our flow rate of 0-5 L/min.
Was this review helpful? Yes No (0/0)
ATO Responded
You can choose our ATO-FLOW-MF5000 flow meter, with a range of 0-15L/min.
Only registered users can write reviews