High precision explosion-proof temperature and humidity sensor has the advantages of anti-impact and anti-aging. The external mounting hole is easy to install, which makes the response speed of the temperature and humidity sensor fast.
Specifications
| Model | ATO-ME-WS-GB |
| Power Supply | 10-30V DC |
| Resolution | Temperature: 0.1℃; Humidity: 0.1%RH |
| Accuracy | Temperature: ±0.2℃ (at 20℃) |
| Humidity: ±2%RH (10%RH-80%RH); ±3%RH (0%RH~10%RH; 80%RH~100%RH) (at 20℃) | |
| Measurement Range | Temperature: -40℃~80℃; -20℃~60℃ (with Display) |
| Humidity: 0%RH~100%RH | |
| Response Time | <200mA |
| LCD Refresh Rate | <1.2s |
| Output Mode | 4-20mA (Included Two Signal: Humidity+Temp, 5 Wire); RS485 |
| Installation Method | Wall-mounted, Fixed on the Wall |
| Enclosure/Protection Level | Cast aluminum, IP66 (Without Probe) |
| Explosion-Proof Mark | Exd IIC T6 GB |
| Explosion-proof Certification | CNEX |
| Electromagnetic Compatibility Standard | EN 61000-6-1; EN 61000-6-3; EN 61000-3-2; EN 61000-3-3 |
Dimension (Unit: mm)

Wiring

Tips: Precautions For Explosion-proof Temperature and Humidity Sensor Use
- To turn the screw on the top cover, press the screw with a screwdriver and then turn the screw.
- When connecting terminals, do not strip the cables too long, and do not expose the copper wires directly inside the product to avoid short-circuit risks.
- Disconnect the power supply before connecting the circuit.
- Do not touch internal components directly with hands or metal objects.
- After the installation is complete, check the screws on the cover and whether the waterproof connector is locked. The wire diameter must be 4-8mm.
- 5 minutes after switching on the power supply, the calibration operation will be carried out. Otherwise, the data output will not be accurate.
Product reviews
About probe
Shelina
1/19/2025 11:08 PM
Hi, I am looking at your explosion proof temperature and humidity sensor ATO-TAHS-EP. I am curious if it comes with the probe itself, I just don't see anything confirming that and most pictures show it without the probe. Additionally, is there any offset to the output depending on temperature? Thank you.
Was this review helpful? (0/0)
Explosion-proof transmitter
Linde
3/3/2026 8:10 PM
We are looking for an explosion-proof temperature and humidity transmitter, equipped with a display screen, suitable for pipeline installation, and featuring a 4-20 mA output signal, capable of operating in ambient temperatures above 60 degrees Celsius. Does your company have a product that meets our requirements?
Was this review helpful? (0/0)
Only registered users can write reviews