Electric Butterfly/Ball Valve Actuator, On-Off, 1000Nm, 24V/110V/220V

$737.88
Electric valve actuator for butterfly/ball valve, available with 25s/1000Nm at 24V DC, 50s/1000Nm at 24V/110V/220V AC, 30s/1000Nm at 380V AC, on-off type, 0-90° rotary angle, IP65 protection degree, aluminium die-casting case, quarter-turn electric actuator, fast closing and opening, small size and easy to operate.
SKU: ATO-EVA-SQ100
*
*
*
*
Free Shipping
Delivery date: 6-25 days

The quarter-turn electric valve actuators are used to control 0-90° rotating valves and other similar products, such as butterfly valves, ball valves, dampers, plug valves, louver valves, etc. It works at the voltage DC 24V, AC 24V, AC 110V, AC 220V, or AC 380V. This small electric valve actuator can be widely used in petroleum, chemical industry, electric power, metallurgy, pharmacy, paper making, energy, water treatment, shipping, textile, food processing, building automation and other fields.

The on-off electric valve actuator, with 1000Nm output torque and 0-90° rotation angle, has great advantages of compact size, light weight, quick opening and closing, easy installation, small operating torque, convenient operation, no need for maintenance and safe use.

1000Nm Electric Valve Actuator Specification

ModelATO-GR-100
Type OperationOn-Off
VoltageDC 24VAC 24VAC 110VAC 220VAC 380V
Motor Power100W
Rated Current5.5A9A2.2A1.2A0.48A
Output Torque1000Nm1000Nm1000Nm
Working Time25s50s30s
Rotary Angle0-90°
Control Circuit*S-type standard, A-type, R-type, P-type
Insulation ResistanceAC 24V: 100MΩ/250V DC
AC 110V/220V/380V: 100MΩ/500V DC
Dielectric StrengthAC 24V: 500V AC/1 minute
AC 110V/220V: 1500V AC/1 minute
AC 380V: 1800V AC/1 minute
Protection GradeIP65
Case MaterialAluminium die-casting component
Explosion-proof GradeNone (Optional EXdIICT4)
InstallationCan be installed in any angle
Electrical Interface2-G1/2 waterproof connector
Ambient Temperature-20℃ ~ +60℃
Weight13.2kg
Matched Valves**Soft sealing ball valve: DN125
Soft sealing butterfly valve: DN350-400

Note:
*
For the control circuit diagram, please refer to Electric Valve Actuator Instruction Manual.
** Due to different manufacturers and different operating environment, even the same type of valves actually has different working torque. Therefore, it is recommended that when selecting a electric valve actuator, the operating torque of the valve should be 60% ~ 80% of the rated output torque of the actuator.

Electric Valve Actuator Dimension (Unit: mm)

1000Nm electric valve actuator dimensions

Details

Electric Valve Actuator Details

Circuit Diagram

200Nm-600Nm electric valve actuator circuit diagram

Tips: Selecting an electric valve actuator according to valve type

1. The quarter-turn electric valve actuator is suitable for butterfly valves, ball valves, plug valves, etc.
The rotation of the output shaft of the electric actuator is less than 360 degrees, usually 90 degrees, to realize the opening and closing of a valve. This type of electric valve actuator are divided into direct connection type and base crank type according to different installation interface modes.

  • The direct connection type refers to the mounting method in which the output shaft of the electric actuator is directly connected to the valve stem.
  • The base crank type refers to the installation form in which the output shaft the electric actuator is connected to the valve stem through the crank.

2. Multi-turn electric actuator (rotary angle > 360 degrees) is applied for gate valves, globe valves, etc.
The rotation of the output shaft of the electric actuator is greater than 360 degrees. Generally, this type of electric actuator needs multiple turns to control the opening and closing of a valve.

3. The linear actuator is suitable for single seat control valves, two-seat control valves, etc.
The movement of the output shaft of this type actuator is linear motion, not a rotary motion.

Proposition 65 Warning

*WARNING: This product can expose you to chemicals, including lead, which is known to the State of California to cause birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

The quarter-turn electric valve actuators are used to control 0-90° rotating valves and other similar products, such as butterfly valves, ball valves, dampers, plug valves, louver valves, etc. It works at the voltage DC 24V, AC 24V, AC 110V, AC 220V, or AC 380V. This small electric valve actuator can be widely used in petroleum, chemical industry, electric power, metallurgy, pharmacy, paper making, energy, water treatment, shipping, textile, food processing, building automation and other fields.

The on-off electric valve actuator, with 1000Nm output torque and 0-90° rotation angle, has great advantages of compact size, light weight, quick opening and closing, easy installation, small operating torque, convenient operation, no need for maintenance and safe use.

1000Nm Electric Valve Actuator Specification

ModelATO-GR-100
Type OperationOn-Off
VoltageDC 24VAC 24VAC 110VAC 220VAC 380V
Motor Power100W
Rated Current5.5A9A2.2A1.2A0.48A
Output Torque1000Nm1000Nm1000Nm
Working Time25s50s30s
Rotary Angle0-90°
Control Circuit*S-type standard, A-type, R-type, P-type
Insulation ResistanceAC 24V: 100MΩ/250V DC
AC 110V/220V/380V: 100MΩ/500V DC
Dielectric StrengthAC 24V: 500V AC/1 minute
AC 110V/220V: 1500V AC/1 minute
AC 380V: 1800V AC/1 minute
Protection GradeIP65
Case MaterialAluminium die-casting component
Explosion-proof GradeNone (Optional EXdIICT4)
InstallationCan be installed in any angle
Electrical Interface2-G1/2 waterproof connector
Ambient Temperature-20℃ ~ +60℃
Weight13.2kg
Matched Valves**Soft sealing ball valve: DN125
Soft sealing butterfly valve: DN350-400

Note:
*
For the control circuit diagram, please refer to Electric Valve Actuator Instruction Manual.
** Due to different manufacturers and different operating environment, even the same type of valves actually has different working torque. Therefore, it is recommended that when selecting a electric valve actuator, the operating torque of the valve should be 60% ~ 80% of the rated output torque of the actuator.

Electric Valve Actuator Dimension (Unit: mm)

1000Nm electric valve actuator dimensions

Details

Electric Valve Actuator Details

Circuit Diagram

200Nm-600Nm electric valve actuator circuit diagram

Tips: Selecting an electric valve actuator according to valve type

1. The quarter-turn electric valve actuator is suitable for butterfly valves, ball valves, plug valves, etc.
The rotation of the output shaft of the electric actuator is less than 360 degrees, usually 90 degrees, to realize the opening and closing of a valve. This type of electric valve actuator are divided into direct connection type and base crank type according to different installation interface modes.

  • The direct connection type refers to the mounting method in which the output shaft of the electric actuator is directly connected to the valve stem.
  • The base crank type refers to the installation form in which the output shaft the electric actuator is connected to the valve stem through the crank.

2. Multi-turn electric actuator (rotary angle > 360 degrees) is applied for gate valves, globe valves, etc.
The rotation of the output shaft of the electric actuator is greater than 360 degrees. Generally, this type of electric actuator needs multiple turns to control the opening and closing of a valve.

3. The linear actuator is suitable for single seat control valves, two-seat control valves, etc.
The movement of the output shaft of this type actuator is linear motion, not a rotary motion.

Only registered users can write reviews