Electric Hot Knife Fabric Cutter

$239.88
Cheap electric fabric cutter does well in cutting and sealing synthetic fabrics with fine edge. The shape blade of hot knife heats up fast and the cutter comes with variable heat setting, allowing it to work efficiently. Power supply AC 230V/50Hz or 120V/60Hz and max. power 80W. Light weight, convenient use and clean cutting.
SKU: ATO-CUTTER-50
*
*
Free Shipping
Delivery date: 6-12 days

Handheld electric hot knife fabric cutter is suitable for cutting Terylene Fabrics, Polyester Fabrics, Printing fabric and Window Curtain Fabric. With sharp blade heating up in seconds, the hot knife is a most efficient hand-hold cutter for cutting synthetic fabrics. The hot cutter can cut and seal the material at the same time and the edge of the fabric is sealed smoothly.

Features

  • Designed for cutting small quantities, short-time use only.
  • Lightweight electric hot knife with sharp blade, fast and clean cutting
  • Temperature of blade can heat up to 500℃ in seconds.
  • With 16 steps adjustment to control temperature
  • Especially suitable for cutting and sealing synthetic fabric efficiently
  • Also used for cutting glue edge of solar photovoltaic glass

Specification

ModelATO-KD-5-0
VoltageAC 230V/50Hz or 120V/60Hz
PowerMax. 80W
Intermittent Operation1/4 min
Temp. of Bladeup to 500℃ in seconds
Adjustable Knob16 steps
Power Cord Length3m
Power Plug (Optional) *US/Europe/UK/Australia
Product Weight400g
Product Size230*50*35mm
Package IncludedFabric Cutter × 1, Blade × 1, Brush × 1, Plastic Box × 1, User Manual × 1

Note:

* Usually, the foam cutters with UK/Australia need longer delivery time (5-10 days).

Applications

Hot knife fabric cutter applications

Tips: Hot Knife Foam/Fabric Cutter Operation Cautions

1. Avoid direct contact between the two blade holders to cause a short circuit.
2. Turn the temperature adjustment knob to the middle position, place the blade on the cutting object, and then press the trigger. The hot knife is preheated for a few seconds to cut. It is recommended to do the cutting test on the waste material first.
3. It is best to keep the temperature and speed in harmony when cutting. If there is too much smoke, it may be because the cutting speed is too slow or the blade temperature is too high. This may cause irregular and uneven cutting trajectories. In this case, you can reduce the blade temperature or release the switch intermittently during cutting. When cutting, the exposed part of the blade should not exceed 2 cm. If the exposed part is too much, the blade may be bent due to overheating.
4. Clean the blade with a cleaning brush.

ATO Hot Knife Foam Cutter

ATO electric hot knife foam cutter can be equipped with different blades or other accessories to meet your different requirements for quickly and smoothly cutting EPS, XPS, Styrofoam, fabric cloth, etc. It is an ideal tool for artwork, packing, building, sculpture, and other applications.

Proposition 65 Warning

*WARNING: This product can expose you to chemicals, including lead, which is known to the State of California to cause birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Product reviews
Recommend a great fabric cutter
5
Ophelia
Avatar
7/9/2021 1:00 AM
Excellent product and value with a blade and a brush. I use this fabric cutter to cut window curtain fabric easily. If you clean the blade with the included brush each time, it also can lasted almost two years already with regular use. Long enough power cord that I usually do not require an extension.  Would buy this same one again if it ever gave out.
Was this review helpful? Yes No (0/0)
Is this hot knife suitable for cutting plastic or styrofoam product?
5
Bruce
Avatar
4/18/2022 3:41 AM
Is this hot knife suitable for cutting  plastic or styrofoam product? We're looking for one.
Was this review helpful? Yes No (0/0)
ATO Responded
Sorry, this fiber cutter is suitable for terylene fabrics, polyester fabrics, printing fabric and window curtain fabric. And we have foam cutters that meet your need.
Easy and efficient
5
Danica
Avatar
9/14/2024 12:07 AM
As a lover of handmade crafts, I often need to deal with various fabrics and fibers, and this electric hot cutting knife really solves many of my problems. I used it to cut several different types of fabrics, including synthetic fibers and thick cotton fabrics. The heating blade of the electric hot cutting knife can quickly heat up and cut very smoothly.
Was this review helpful? Yes No (0/0)
It's a great tool for quick fabric jobs
5
Daniel
Avatar
11/17/2025 8:14 PM
I’ve been using this electric hot knife to cut synthetic fabrics and it works really well. The blade heats up fast and gives a clean sealed edge with no fraying. It’s lightweight, easy to control, and the adjustable temperature is a big plus. Great tool for quick fabric jobs.
Was this review helpful? Yes No (0/0)
Edge wear cutting
4
Hester
Avatar
8/18/2026 12:01 AM
We are currently looking for a method to cut fiber products. We are encountering an edge wear problem and hope your hot knife cutting machine can solve this issue. Which cutting machine would you recommend suitable for cutting this type of fabric?
Was this review helpful? Yes No (0/0)
ATO Responded
What type of material do you need to cut? Our cutting machines are mainly used for cutting rock wool, mineral wool, foam, webbing, and similar materials.
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Handheld electric hot knife fabric cutter is suitable for cutting Terylene Fabrics, Polyester Fabrics, Printing fabric and Window Curtain Fabric. With sharp blade heating up in seconds, the hot knife is a most efficient hand-hold cutter for cutting synthetic fabrics. The hot cutter can cut and seal the material at the same time and the edge of the fabric is sealed smoothly.

Features

  • Designed for cutting small quantities, short-time use only.
  • Lightweight electric hot knife with sharp blade, fast and clean cutting
  • Temperature of blade can heat up to 500℃ in seconds.
  • With 16 steps adjustment to control temperature
  • Especially suitable for cutting and sealing synthetic fabric efficiently
  • Also used for cutting glue edge of solar photovoltaic glass

Specification

ModelATO-KD-5-0
VoltageAC 230V/50Hz or 120V/60Hz
PowerMax. 80W
Intermittent Operation1/4 min
Temp. of Bladeup to 500℃ in seconds
Adjustable Knob16 steps
Power Cord Length3m
Power Plug (Optional) *US/Europe/UK/Australia
Product Weight400g
Product Size230*50*35mm
Package IncludedFabric Cutter × 1, Blade × 1, Brush × 1, Plastic Box × 1, User Manual × 1

Note:

* Usually, the foam cutters with UK/Australia need longer delivery time (5-10 days).

Applications

Hot knife fabric cutter applications

Tips: Hot Knife Foam/Fabric Cutter Operation Cautions

1. Avoid direct contact between the two blade holders to cause a short circuit.
2. Turn the temperature adjustment knob to the middle position, place the blade on the cutting object, and then press the trigger. The hot knife is preheated for a few seconds to cut. It is recommended to do the cutting test on the waste material first.
3. It is best to keep the temperature and speed in harmony when cutting. If there is too much smoke, it may be because the cutting speed is too slow or the blade temperature is too high. This may cause irregular and uneven cutting trajectories. In this case, you can reduce the blade temperature or release the switch intermittently during cutting. When cutting, the exposed part of the blade should not exceed 2 cm. If the exposed part is too much, the blade may be bent due to overheating.
4. Clean the blade with a cleaning brush.

Product reviews
Recommend a great fabric cutter
5
Ophelia
Avatar
7/9/2021 1:00 AM
Excellent product and value with a blade and a brush. I use this fabric cutter to cut window curtain fabric easily. If you clean the blade with the included brush each time, it also can lasted almost two years already with regular use. Long enough power cord that I usually do not require an extension.  Would buy this same one again if it ever gave out.
Was this review helpful? Yes No (0/0)
Is this hot knife suitable for cutting plastic or styrofoam product?
5
Bruce
Avatar
4/18/2022 3:41 AM
Is this hot knife suitable for cutting  plastic or styrofoam product? We're looking for one.
Was this review helpful? Yes No (0/0)
ATO Responded
Sorry, this fiber cutter is suitable for terylene fabrics, polyester fabrics, printing fabric and window curtain fabric. And we have foam cutters that meet your need.
Easy and efficient
5
Danica
Avatar
9/14/2024 12:07 AM
As a lover of handmade crafts, I often need to deal with various fabrics and fibers, and this electric hot cutting knife really solves many of my problems. I used it to cut several different types of fabrics, including synthetic fibers and thick cotton fabrics. The heating blade of the electric hot cutting knife can quickly heat up and cut very smoothly.
Was this review helpful? Yes No (0/0)
It's a great tool for quick fabric jobs
5
Daniel
Avatar
11/17/2025 8:14 PM
I’ve been using this electric hot knife to cut synthetic fabrics and it works really well. The blade heats up fast and gives a clean sealed edge with no fraying. It’s lightweight, easy to control, and the adjustable temperature is a big plus. Great tool for quick fabric jobs.
Was this review helpful? Yes No (0/0)
Edge wear cutting
4
Hester
Avatar
8/18/2026 12:01 AM
We are currently looking for a method to cut fiber products. We are encountering an edge wear problem and hope your hot knife cutting machine can solve this issue. Which cutting machine would you recommend suitable for cutting this type of fabric?
Was this review helpful? Yes No (0/0)
ATO Responded
What type of material do you need to cut? Our cutting machines are mainly used for cutting rock wool, mineral wool, foam, webbing, and similar materials.
Only registered users can write reviews