Duct air flow sensor/transmitter is designed for measuring airflow velocity and flow rate in pipelines, with a high-precision wind speed measurement unit that is sensitive and can quickly and accurately measure small wind speeds. It has good stability, small drift, and high accuracy, and can calculate real-time air volume values based on the measured pipeline cross-sectional area.
Features
- Duct air flow sensor is suitable for harsh environments such as ventilation ducts and grease exhaust ducts.
- The sensor utilizes a full-range secondary calibration method to ensure good linearity and high accuracy.
- Its open flange installation design, combined with high-quality silicone sealing rings, reduces air leakage and ensures durability.
- Users can set the measurement duct cross-sectional area, and the sensor uploads real-time flow values based on the configured area.
- Air flow sensor features an RS485 communication interface that supports the standard ModBus-RTU protocol, with configurable communication address and baud rate, and a maximum communication distance of 2000 meters.
- The duct air flow transmitter address can be configured via software or set using a DIP switch, providing ease of use for the operator.
- The terminal block uses imported tool-free terminals, allowing users to connect with just a simple press and insert, eliminating the need for tools.
- The sensor incorporates specialized EMC anti-interference components, enabling it to withstand strong electromagnetic interference from devices like variable frequency drives.
- It is marked with airflow direction indicators, facilitating straightforward installation on-site and ensuring a simple and efficient setup process.
Specification
| Model | ATO-RS-FS-01 | ATO-RS-FS-02 |
| Output signal | RS485 | Analog output (4~20mA/0~5V/0~10V) |
| Power supply | 10-30V DC | |
| Maximum power consumption | 0.5W | 0.6W |
| Measurement medium | Air, nitrogen, oil fume exhaust | |
| Accuracy | ± (0.2+2% FS) m/s | |
| Operating temperature | -10℃~50℃ | |
| Range | 0~30m/s | |
| Resolution | 0.1m/s | |
| Response time | 2s | |
| Long-term stability | ≤ 0.1m/s/year | |
| Output resistance | -- | ≤ 600Ω (4~20mA) or ≤ 250Ω (0~5V/0~10V) |
| Communication protocol | ModBus-RTU | -- |
| Parameter settings | Set via configuration software | -- |
Dimension (mm)

Wiring instruction
| RS485 | Analog output |
A: 485-A | V+: Power supply positive (10~30V DC) |
V+: Power supply positive (10~30V DC) | GND: Power supply negative, wind speed signal negative |
GND: Power supply negative | T: Wind speed signal positive |
B: 485-B | -- |
Note: When wiring the 485 signal line, please note that the A/B lines cannot be connected reversely, and the addresses of multiple devices on the bus cannot conflict.
Installation diagram

Tips: Installation method of duct air flow sensor/transmitter
- First, make a hole with a diameter of 20mm on the ventilation duct and insert the air duct into the hole.
- Adjust the direction of the equipment so that the arrow direction of the equipment is consistent with the direction of the wind speed. The height of the equipment can be controlled by adjusting the position of the flange.
- Install three screws on the flange to fix the equipment and complete the installation.
Product reviews
Voltage drop speed
Zaol
5/14/2025 8:21 PM
I am interested in the duct air flow sensor ATO-RS-FS-02 and want to know how fast the output signal drops from 10Vdc to 0Vdc after the fan is powered off and stopped (zero airflow).
Was this review helpful? (0/0)
Average Value Measurement
Bercy
1/13/2026 8:30 PM
Can this sensor average the flow velocity within a 10-inch duct in the range of 0-10 m/s?
Was this review helpful? (0/0)
Only registered users can write reviews
Customers who bought this item also bought
Noise Sensor, Stainless Steel, RS485
ATO-NS-ST485
$134.28
Highly efficient noise sensor with stainless steel housing, supports RS485 communication protocol, designed for noise monitoring. Accurately detects ambient noise levels for a wide range of applications. Robust stainless steel housing ensures durability.
Accelerometer and Vibration Sensor, 4-20mA Output, 0-20mm/s
ATO-AS-1020A
$258.77
This low-cost accelerometer and vibration sensor for sale supports 4-20mA signal output and is capable of accurately measuring vibration in the range of 10g/0-20mm/s. With a frequency response of 10-1000 Hz, it is capable of capturing vibration fluctuations in a variety of equipment. It supports an operating temperature range from -40°C to 85°C and has excellent anti-interference capability. The accelerometer sensor utilizes a DC24V±10% operating voltage and has a 2-wire connection to simplify installation.
Vibration Transmitter 4-20 mA, 2-wire/3-wire
ATO-VT-100
$390.55
Low price vibration transmitter with a wide velocity range from 10 mm/s to 50 mm/s, works at 4-20 mA output current and 24 V voltage. The vibration sensor has the characteristics of digitization, multi-function and intelligence. It is suitable for various complicated environment.