Dual Arm Portable Fume Extractor

$1,108.63
High quality dual arm mobile fume extractor, smoke air purifier, which can capture harmful smoke through independent ducts and adjustable air volume, significantly improving the working environment. 200W, voltage 110V and 220V available, easy filter replacement.
SKU: ATO-FE-C200
*
*
*
*
Free Shipping
Delivery date: 6-12 days

Low cost dual arm portable fume extractot can clean the air of chemiclas particulates, 3 kinds of filter can be selected, 110V and 220V are avaliable.

Note:

1. 1 set of filter modules for fume extractor including 1 PCS primary filter + 1 PCS intermediate filter + 1 PCS advanced filter.

2. Filter life: primary filter 7 ~ 30 days, intermediate filter 3 ~ 6 months, advanced filter 6 ~ 12 months.

3. Buy a dual arm fume extractor, we will give a power line, a collector hood, a filter early effect, two sets of PP filter, activated carbon filter 2 sets, along with a warranty card and  manual.

Specification:

ModelATO-FE-C200
Voltage110V/220V
Power200W
Systemic Flow348m3/h
Iniet Flange2*φ75mm
Niose55dB
Dimensions425mmx250mmx480mm
Filtering Efficiency0.3μm 99.97%
Warranty12 Months
Weight15Kg
Length of Duct1.4M (Please contact us for other lengths)

Triple filter structure
1. The primary filter will block and absorb a large amount of dust.
2. The intermediate filter filters larger powders to extend the life of the main filter.
3. Advanced filter consists of high efficiency filter and gas filter. Advanced filters purify gases and powders through a combination of activated carbon and other chemical treatments, then exhaust clean air from the air outlet.

Features
1. Rigid and shaped appearance, full metal frame structure, can resist strong impact and vibration, lightweight and easy to move.
2. The installation is simple and convenient without additional pipes, which is conducive to the cleanliness and beauty of the working space.
3. Multi-filtration design ensures to filter out harmful substances in smoke and protect human safety. Primary effect, medium effect and main filter element can be replaced separately, which prolongs the service life of main filter.
4. The built-in air circulation filtration method can avoid the discharge of indoor air conditioning/heating to the outdoor environment and meet the environmental protection standards in a real sense.
5. High-power brushless DC motor, ultra-low noise operation, long service life, eddy backward metal wheel design, high air volume, large suction force, safe and reliable.

Tips: Particles that normally evaporate at high temperatures from solder and flux. These particles float in the air and can be seen by the human eye under a certain amount of light. And the other 5% is emitted in the air in the form of gas, which is invisible to our naked eyes, and these gases contain a large number of harmful ingredients such as carbon monoxide, carbon dioxide, methanol, methane, formaldehyde and so on. These particles and harmful gases can affect the health of operators and pollute the environment. The smoke purification system is collected into the equipment of the smoke removal system through various suitable collectors (soldering iron suction pipe/smoking arm/smoking hood, etc.) through the pipeline installed in each station, which is filtered by the internal filter of the system and then into the room.

This video will show you ATO Fume extractor, 110V / 220V fume extractor is optional.

Product reviews
Would your dual fume extractor work good with aerosols?
5
Brian
Avatar
4/7/2020 12:38 AM
Hello? I have a company that refinishishes rim's. Would your dual fume extractor work good with aerosols?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, dual fume extractor can remove odor and smoke.
Quiet dual arm portable fume extractor
5
Klinger
Avatar
3/8/2021 11:22 PM
I have bought a lot of fume extractor before, and the sound is loud and it hurts my ears a lot. I wanted to buy a smoke evacuator with low noise, and I finally found it on the ATO.com online store. Its sound is 55 decibels, which can run with ultra-low noise. Don't worry about my ear hurt.
Was this review helpful? Yes No (0/0)
Good product for the intended purpose
5
Mary
Avatar
6/14/2022 3:41 AM
This fume extractor is all metal except for the extension tube. This one uses 3 filters all others use only 1 carbon filter. This has a nice LED fan speed readout. It is a little expensive compared to others in this category. But I feel it is much better built making up for the cost. No, A "Fume Extractor" in General will only extract fumes where the nozzle is pointed. This is not a "FAN". Keep that in mind. If you are OK with that then I feel this really sucks the Fume. I have researched many many units on Youtube and checked all the review of other Fume Extractors on Amazon. and having the all metal case and 3 filters makes this a decent product. the only thing is the plastic accordion tube is hard to keep in place.
Was this review helpful? Yes No (0/0)
Satisfied with this fume extractor
5
Kespeon
Avatar
12/4/2022 10:52 PM
I wanted to buy a smoke evacuator with low noise. And I'm satisfied with this portable fume extractor. It's been two months since I bought it. So far there have been no problems. I will order more.
Was this review helpful? Yes No (0/0)
Super
5
Fitch
Avatar
11/2/2023 3:15 AM
I have used the extractor to pull smoke from cutting with my laser. It has worked well and I am happy with my purchase as I do not have to spend more money!
Was this review helpful? Yes No (0/0)
Powerful fume extractor fan function
4
robybobby
Avatar
4/29/2024 3:24 AM
This is a powerful and easy to use, fume extractor. The handles on top and wheels on bottom make it very easy to move and maneuver. There are multiple layers of good quality filters inside the unit. Unfortunately, ours arrived with a substantial dent and crack along one side. Luckily, it appears to only be a cosmetic issue. Overall, the vacuum smoke exhaust fan performs well in our 3D printing and laser engraving rooms and is worth purchasing.
Was this review helpful? Yes No (0/0)
great fume extractor
4
Becky11
Avatar
10/10/2025 8:43 PM
This dual arm portable fume extractor has been a great addition to my workshop. I love how flexible the arms are, letting me position them right where I need to. The air quality has improved so much since I started using it. It is a bit noisier than I expected when on the highest setting, but I am still very happy with its performance.
Was this review helpful? Yes No (0/0)
Dealing with fluoropolymer fumes
5
Kangur
Avatar
8/19/2026 1:57 AM
I am looking for a small benchtop fume collector for use with fluoropolymer resins such as PFA and FEP when performing melt indexer melt flow testing. Fluoropolymer resins are not currently tested in our laboratory and will require upgrading to properly handle these materials. Can your two-arm portable smoke purifier - SKU: ATO-FE-C200 handle fluoropolymer smoke?
Was this review helpful? Yes No (0/0)
ATO Responded
It is not recommended to use ATO-FE-C200. ATO-FE-C200 uses a built-in air circulation filtration method to discharge filtered air back to the work space. However, with fluoropolymer fumes, corrosive gases such as HF can penetrate the standard activated carbon layer, causing the filtered air to still contain toxic components and re-enter the laboratory environment. We currently have no suitable recommendations.
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Low cost dual arm portable fume extractot can clean the air of chemiclas particulates, 3 kinds of filter can be selected, 110V and 220V are avaliable.

Note:

1. 1 set of filter modules for fume extractor including 1 PCS primary filter + 1 PCS intermediate filter + 1 PCS advanced filter.

2. Filter life: primary filter 7 ~ 30 days, intermediate filter 3 ~ 6 months, advanced filter 6 ~ 12 months.

3. Buy a dual arm fume extractor, we will give a power line, a collector hood, a filter early effect, two sets of PP filter, activated carbon filter 2 sets, along with a warranty card and  manual.

Specification:

ModelATO-FE-C200
Voltage110V/220V
Power200W
Systemic Flow348m3/h
Iniet Flange2*φ75mm
Niose55dB
Dimensions425mmx250mmx480mm
Filtering Efficiency0.3μm 99.97%
Warranty12 Months
Weight15Kg
Length of Duct1.4M (Please contact us for other lengths)

Triple filter structure
1. The primary filter will block and absorb a large amount of dust.
2. The intermediate filter filters larger powders to extend the life of the main filter.
3. Advanced filter consists of high efficiency filter and gas filter. Advanced filters purify gases and powders through a combination of activated carbon and other chemical treatments, then exhaust clean air from the air outlet.

Features
1. Rigid and shaped appearance, full metal frame structure, can resist strong impact and vibration, lightweight and easy to move.
2. The installation is simple and convenient without additional pipes, which is conducive to the cleanliness and beauty of the working space.
3. Multi-filtration design ensures to filter out harmful substances in smoke and protect human safety. Primary effect, medium effect and main filter element can be replaced separately, which prolongs the service life of main filter.
4. The built-in air circulation filtration method can avoid the discharge of indoor air conditioning/heating to the outdoor environment and meet the environmental protection standards in a real sense.
5. High-power brushless DC motor, ultra-low noise operation, long service life, eddy backward metal wheel design, high air volume, large suction force, safe and reliable.

Tips: Particles that normally evaporate at high temperatures from solder and flux. These particles float in the air and can be seen by the human eye under a certain amount of light. And the other 5% is emitted in the air in the form of gas, which is invisible to our naked eyes, and these gases contain a large number of harmful ingredients such as carbon monoxide, carbon dioxide, methanol, methane, formaldehyde and so on. These particles and harmful gases can affect the health of operators and pollute the environment. The smoke purification system is collected into the equipment of the smoke removal system through various suitable collectors (soldering iron suction pipe/smoking arm/smoking hood, etc.) through the pipeline installed in each station, which is filtered by the internal filter of the system and then into the room.

Product reviews
Would your dual fume extractor work good with aerosols?
5
Brian
Avatar
4/7/2020 12:38 AM
Hello? I have a company that refinishishes rim's. Would your dual fume extractor work good with aerosols?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, dual fume extractor can remove odor and smoke.
Quiet dual arm portable fume extractor
5
Klinger
Avatar
3/8/2021 11:22 PM
I have bought a lot of fume extractor before, and the sound is loud and it hurts my ears a lot. I wanted to buy a smoke evacuator with low noise, and I finally found it on the ATO.com online store. Its sound is 55 decibels, which can run with ultra-low noise. Don't worry about my ear hurt.
Was this review helpful? Yes No (0/0)
Good product for the intended purpose
5
Mary
Avatar
6/14/2022 3:41 AM
This fume extractor is all metal except for the extension tube. This one uses 3 filters all others use only 1 carbon filter. This has a nice LED fan speed readout. It is a little expensive compared to others in this category. But I feel it is much better built making up for the cost. No, A "Fume Extractor" in General will only extract fumes where the nozzle is pointed. This is not a "FAN". Keep that in mind. If you are OK with that then I feel this really sucks the Fume. I have researched many many units on Youtube and checked all the review of other Fume Extractors on Amazon. and having the all metal case and 3 filters makes this a decent product. the only thing is the plastic accordion tube is hard to keep in place.
Was this review helpful? Yes No (0/0)
Satisfied with this fume extractor
5
Kespeon
Avatar
12/4/2022 10:52 PM
I wanted to buy a smoke evacuator with low noise. And I'm satisfied with this portable fume extractor. It's been two months since I bought it. So far there have been no problems. I will order more.
Was this review helpful? Yes No (0/0)
Super
5
Fitch
Avatar
11/2/2023 3:15 AM
I have used the extractor to pull smoke from cutting with my laser. It has worked well and I am happy with my purchase as I do not have to spend more money!
Was this review helpful? Yes No (0/0)
Powerful fume extractor fan function
4
robybobby
Avatar
4/29/2024 3:24 AM
This is a powerful and easy to use, fume extractor. The handles on top and wheels on bottom make it very easy to move and maneuver. There are multiple layers of good quality filters inside the unit. Unfortunately, ours arrived with a substantial dent and crack along one side. Luckily, it appears to only be a cosmetic issue. Overall, the vacuum smoke exhaust fan performs well in our 3D printing and laser engraving rooms and is worth purchasing.
Was this review helpful? Yes No (0/0)
great fume extractor
4
Becky11
Avatar
10/10/2025 8:43 PM
This dual arm portable fume extractor has been a great addition to my workshop. I love how flexible the arms are, letting me position them right where I need to. The air quality has improved so much since I started using it. It is a bit noisier than I expected when on the highest setting, but I am still very happy with its performance.
Was this review helpful? Yes No (0/0)
Dealing with fluoropolymer fumes
5
Kangur
Avatar
8/19/2026 1:57 AM
I am looking for a small benchtop fume collector for use with fluoropolymer resins such as PFA and FEP when performing melt indexer melt flow testing. Fluoropolymer resins are not currently tested in our laboratory and will require upgrading to properly handle these materials. Can your two-arm portable smoke purifier - SKU: ATO-FE-C200 handle fluoropolymer smoke?
Was this review helpful? Yes No (0/0)
ATO Responded
It is not recommended to use ATO-FE-C200. ATO-FE-C200 uses a built-in air circulation filtration method to discharge filtered air back to the work space. However, with fluoropolymer fumes, corrosive gases such as HF can penetrate the standard activated carbon layer, causing the filtered air to still contain toxic components and re-enter the laboratory environment. We currently have no suitable recommendations.
Only registered users can write reviews