Digital Stepper Driver 1-4.2A 20-50V DC for Nema 17, 23 Stepper Motor

$105.72
ATODSP57 is digital 2-phase stepper motor driver, using the latest 32 dsp technology, advanced digital filtering technique, anti-resonance technology, precision current control technology and vector control technology. Capable of driving Nema 17, 23 closed-loop hybrid stepper motors.
SKU: ATO-STEP-D2A2050
*
Free Shipping
Delivery date: 6-12 days

2-phase digital stepper driver, 20-50V DC, 1-4.2A for Nema 17, 23 2 phase stepper motor, manufacturer direct sale.

Features:

  • Low motor vibration, low noise, no loss of step.
  • Optical isolation, difference signal input.
  • Automatic motor parameter identification.
  • Vector control, ultra-low heating.
  • Offer 12-24v control signal interface.
  • Step and direction control.
  • Fast response, no delay and zero setting time.
  • Much lower cost than traditional servo systems.
  • No torque reservation.

Specifications

Basics Information
ModelATODSP57
Size118 x 75.5 x 34 mm
Phase2
MaterialStainless Steel
Mounting Hole Distance112 mm
Max Input Frequency200 KHz
Input Voltage Range20-50V DC
Output Current1-4.2 A
Control ModeStep & Direction
Function Description
FunctionsOperation Instructions
Signal InterfacePULPUL+ is the positive end of the control pulse signal PUL- is the negative end of the control pulse signal
DIRDIR+ is the positive end of directional signal DIR- is the negative end of directional signal
ENAENA+ is the positive end of enabling signal ENA+ is the negative end of enabling signal
Motor InterfaceAA+ is connected with the positive end of the A phase winding of the stepping motor A- is connected with the negative end of the A phase winding of the stepping motor
BB+ is connected with the positive end of the B phase winding of the stepping motor B- is connected with the negative end of the B phase winding of the stepping motor
When the A and B two phase windings are switched, the motor direction is reversed
Indicator Light1. The green light is the power indicating lamp. When the drive is powered on, the green light is always on. 2. The red light is the fault indicating lamp. When the overvoltage and overcurrent faults occur, the trouble lamp is always on.
Note: The default input signal is 5V pulse signal. When 24V input signal is required, please in series with1.8-2kΩ resistance.

Switch of Options

Peak Output CurrentREF Output CurrentSW1SW2SW3
1A0.71AONONON
1.46A2.86AOFFONON
1.91A3.43AONOFFON
2.37A4AOFFOFFON
3.84A4.57AONONOFF
3.31A5.14AOFFONOFF
3.76A5.71AONOFFOFF
4.2A3AOFFOFFOFF

Micro Step Selection

PUL/REVSW5SW6SW7SW8
400OFFONONON
800ONOFFONON
1600OFFOFFONON
3200ONONOFFON
6400OFFONOFFON
12800ONOFFOFFON
25600OFFOFFOFFON
1000ONONONOFF
2000OFFONONOFF
4000ONOFFONOFF
5000OFFOFFONOFF
8000ONONOFFOFF
10000OFFONOFFON
20000ONOFFOFFOFF
25000OFFOFFOFFOFF

Driver Wiring Diagram
DSP57 driver wiring diagram
Driver Wiring Diagram
driver circuit
Installation Size (Unit: mm)
dsp57 dimension

Details

Digital Stepper Driver 1-4.2A 20 50V DC for Nema 17 Details

Tips: The role of stepper driver’s subdivision
Major advantages of subdivided driver: Low frequency oscillation of motor is completely eliminated. Low frequency oscillation is the intrinsic characteristic of the stepper motor (especially VR motor). However, subdivision is the only way to eliminate it. If your stepper motor has to work at resonance region (e.g.: run arc) sometimes, it is the only choice to choose subdivided driver to increase the output torque of the motor. Especially for 3-phase VR motor, its torque is increased by about 30-40% when not subdivided. Thus, the resolution of the motor is increased. With the stepping angle reduced and uniformity of the step pitch increased, the resolution of the motor is self-evident. The main role of stepper motor driver’s subdivision is to enhance the accuracy of the stepper motor.

How to control a stepper motor using a PLC and HMI?
This video shows you how to configure a PLC, HMI, motor driver, and proximity sensor to perform Origin Return (OPR) control of a stepper motor.

Common Stepper Motor Troubleshooting Problems and Tips
In this video, 9 common problems that can occur with stepper motors are discussed, and expert advice is provided for diagnosing and effectively resolving these problems. If you have ever experienced problems with your stepper motor or want to be prepared for any future problems, this video is a must watch.

Product reviews
Wonderful digital stepper driver
5
Celery
Avatar
9/1/2021 11:52 PM
I'm very happy with this digital stepper driver. I bought three nema23 digital stepper drivers, two to drive the X axis and one to drive the Y axis. It is very easy to use. So I want to recommend it to everyone.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

2-phase digital stepper driver, 20-50V DC, 1-4.2A for Nema 17, 23 2 phase stepper motor, manufacturer direct sale.

Features:

  • Low motor vibration, low noise, no loss of step.
  • Optical isolation, difference signal input.
  • Automatic motor parameter identification.
  • Vector control, ultra-low heating.
  • Offer 12-24v control signal interface.
  • Step and direction control.
  • Fast response, no delay and zero setting time.
  • Much lower cost than traditional servo systems.
  • No torque reservation.

Specifications

Basics Information
ModelATODSP57
Size118 x 75.5 x 34 mm
Phase2
MaterialStainless Steel
Mounting Hole Distance112 mm
Max Input Frequency200 KHz
Input Voltage Range20-50V DC
Output Current1-4.2 A
Control ModeStep & Direction
Function Description
FunctionsOperation Instructions
Signal InterfacePULPUL+ is the positive end of the control pulse signal PUL- is the negative end of the control pulse signal
DIRDIR+ is the positive end of directional signal DIR- is the negative end of directional signal
ENAENA+ is the positive end of enabling signal ENA+ is the negative end of enabling signal
Motor InterfaceAA+ is connected with the positive end of the A phase winding of the stepping motor A- is connected with the negative end of the A phase winding of the stepping motor
BB+ is connected with the positive end of the B phase winding of the stepping motor B- is connected with the negative end of the B phase winding of the stepping motor
When the A and B two phase windings are switched, the motor direction is reversed
Indicator Light1. The green light is the power indicating lamp. When the drive is powered on, the green light is always on. 2. The red light is the fault indicating lamp. When the overvoltage and overcurrent faults occur, the trouble lamp is always on.
Note: The default input signal is 5V pulse signal. When 24V input signal is required, please in series with1.8-2kΩ resistance.

Switch of Options

Peak Output CurrentREF Output CurrentSW1SW2SW3
1A0.71AONONON
1.46A2.86AOFFONON
1.91A3.43AONOFFON
2.37A4AOFFOFFON
3.84A4.57AONONOFF
3.31A5.14AOFFONOFF
3.76A5.71AONOFFOFF
4.2A3AOFFOFFOFF

Micro Step Selection

PUL/REVSW5SW6SW7SW8
400OFFONONON
800ONOFFONON
1600OFFOFFONON
3200ONONOFFON
6400OFFONOFFON
12800ONOFFOFFON
25600OFFOFFOFFON
1000ONONONOFF
2000OFFONONOFF
4000ONOFFONOFF
5000OFFOFFONOFF
8000ONONOFFOFF
10000OFFONOFFON
20000ONOFFOFFOFF
25000OFFOFFOFFOFF

Driver Wiring Diagram
DSP57 driver wiring diagram
Driver Wiring Diagram
driver circuit
Installation Size (Unit: mm)
dsp57 dimension

Details

Digital Stepper Driver 1-4.2A 20 50V DC for Nema 17 Details

Tips: The role of stepper driver’s subdivision
Major advantages of subdivided driver: Low frequency oscillation of motor is completely eliminated. Low frequency oscillation is the intrinsic characteristic of the stepper motor (especially VR motor). However, subdivision is the only way to eliminate it. If your stepper motor has to work at resonance region (e.g.: run arc) sometimes, it is the only choice to choose subdivided driver to increase the output torque of the motor. Especially for 3-phase VR motor, its torque is increased by about 30-40% when not subdivided. Thus, the resolution of the motor is increased. With the stepping angle reduced and uniformity of the step pitch increased, the resolution of the motor is self-evident. The main role of stepper motor driver’s subdivision is to enhance the accuracy of the stepper motor.

Product reviews
Wonderful digital stepper driver
5
Celery
Avatar
9/1/2021 11:52 PM
I'm very happy with this digital stepper driver. I bought three nema23 digital stepper drivers, two to drive the X axis and one to drive the Y axis. It is very easy to use. So I want to recommend it to everyone.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews
Customers who bought this item also bought

6-wire Nema 23 Stepper Motor, 2 phase, 2A, 1.8 degree

ATO-STEP-512302
$65.46
This is high quality Nema 23 stepper motor with 1.8 deg. step angle(200 steps/rev). Each phase draws current 2A, allowing for a holding torque of 0.72Nm. Motor type is Hybrid Stepper Motor. Direct sales by manufacturer.