Digital Air Pressure Switch, M5

$142.06
Digital pressure switch for sale online at affordable price. High accuracy pressure switch with rated pressure range 0.0~101.0kPa/ -100.0~100.0kPa/ -100.0~1.000MPa for selection, NPN or PNP open collector 2 outputs can be chosen, takeover diameter M5. The high precision digital pressure switch is widely used in factory automation, chemical textile industry, medical equipment, chemical industry and other fields.
SKU: ATO-DPS-10
*
*
Free Shipping
Delivery date: 6-12 days

Digital air pressure switch which support two colors digital display, lower cost pressure switch with max. current 80mA, 2.5 ms fast response time.

Features

  • The air pressure is proportional to the electrical signal, enabling continuous control of the pressure.
  • Thin 9.8mm, realize integration, save space and light weight.
  • Digital display of pressure.

Specification

ModelATO-NZSE10ATO-NZSE10FATO-NISE10
Rated pressure range0.0~101.0kPa-100.0~100.0kPa-100.0~1.000MPa
Display/ Set pressure range10.0~105.0kPa-105.0~105.0kPa-105.0~1.050MPa
Withstand pressure500kPa500kPa1.5MPa
Display/ Minimum unit setting0.1kPa0.1kPa0.001MPa
Switch outputNPN or PNP open collector 2 outputs
Maximum load current80mA
Maximum applied voltage28 V (With NPN output)
Residual voltage2 V or less (With load current of 80 mA)
Response time2.5 ms or less (Response time selections with anti-chattering function: 20, 100, 500, 1000, 2000 ms)
Short circuit protectionYes
HysteresisHysteresis modeVariable (0 or above)
Window comparator mode
Analog output (Voltage output)Output voltage (Rated pressure range)1~5V±2.5%F.S.1~5V±2.5%F.S.
Linearity±1%F.S.
Output impedenceApprox. 1kΩ
EnvironmentEnclosureIP40
Operating temperature rangeOperating: –5 to 50°C, Stored: –10 to 60°C (No freezing or condensation)
Operating humidity rangeOperating and stored: 35 to 85% RH (No condensation)
Withstand voltageAC1000V for 1 minute between terminals and housing
Insulation resisitance50MΩ or more (500 VDC measured via megohmmeter) between terminals and housing
Vibration resistant10~150Hz, the lesser of 1.5mm full amplitude or 20m/s², 2 hours in each direction of xyz (without power)
Shock proof100m/ s² 3 times in each direction of XYZ (without electricity)
FluidAir, Non-corrosive gas, Non-flammable gas
Takeover diameterM5
Power supply voltage12 to 24 VDC ±10%, Ripple (p-p) 10% or less (With power supply polarity protection)
Current consumption40 mA or less
Repeat accurancy±0.2% F.S.±1 digit
Display3 1/2 digit, 7-segment indicator, 1-color display (Red)
Display accurancy±2% F.S. ±1 digit (at 25°C ±3°C ambient temperature)
Indicator lightLights up when output is turned ON. OUT1: Green; OUT2: Red
Lead wire with connector±2% F.S. (at 25°C in an operating range of -5 to 50°C)
Temperature characteristicsOilproof heavy-duty vinyl cable.5 cores, ∅3.5, 2 m, Conductor area: 0.15 mm2 (AWG26) Insulator O.D.: 1.0 mm
StandardsCE marking, RoHS, UL/ CSA

Internal Circuits and Wiring

Digital pressure switch wiring diagram of NPNDigital pressure switch wiring diagram of PNP

Dimension (mm)

Digital pressure switch dimension

Piping specification

ModelM5M5
Port sizeM5*0.8 (Side port)M5*0.8 (Rear ported)
Wetted part materialSensor pressure receiving areaSensor pressure receiving area: Silicon
Piping portC3604 (Electroless nickel plating)
O-ring: HNBR
WeightWith lead wire with connector (5 cores, 2m)55g
Without lead wire with connector15g

Tips: What is Digital Pressure Switch?

The digital pressure switch has a built-in precision pressure sensor, amplifies the pressure signal through a high-precision instrumentation amplifier, collects and processes data through a high-speed MCU, generally uses 4-digit LED real-time digital pressure display, relay signal output, and upper and lower limit control points can be freely set , small hysteresis, anti-vibration, fast response, stable and reliable, high precision (accuracy is generally ±0.5% F.S, high is ±0.2% F.S), the use of hysteresis setting can effectively protect the repeated action caused by pressure fluctuations, protection control The equipment is a high-precision equipment that detects pressure and liquid level signals and realizes pressure and liquid level monitoring and control.

Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Digital air pressure switch which support two colors digital display, lower cost pressure switch with max. current 80mA, 2.5 ms fast response time.

Features

  • The air pressure is proportional to the electrical signal, enabling continuous control of the pressure.
  • Thin 9.8mm, realize integration, save space and light weight.
  • Digital display of pressure.

Specification

ModelATO-NZSE10ATO-NZSE10FATO-NISE10
Rated pressure range0.0~101.0kPa-100.0~100.0kPa-100.0~1.000MPa
Display/ Set pressure range10.0~105.0kPa-105.0~105.0kPa-105.0~1.050MPa
Withstand pressure500kPa500kPa1.5MPa
Display/ Minimum unit setting0.1kPa0.1kPa0.001MPa
Switch outputNPN or PNP open collector 2 outputs
Maximum load current80mA
Maximum applied voltage28 V (With NPN output)
Residual voltage2 V or less (With load current of 80 mA)
Response time2.5 ms or less (Response time selections with anti-chattering function: 20, 100, 500, 1000, 2000 ms)
Short circuit protectionYes
HysteresisHysteresis modeVariable (0 or above)
Window comparator mode
Analog output (Voltage output)Output voltage (Rated pressure range)1~5V±2.5%F.S.1~5V±2.5%F.S.
Linearity±1%F.S.
Output impedenceApprox. 1kΩ
EnvironmentEnclosureIP40
Operating temperature rangeOperating: –5 to 50°C, Stored: –10 to 60°C (No freezing or condensation)
Operating humidity rangeOperating and stored: 35 to 85% RH (No condensation)
Withstand voltageAC1000V for 1 minute between terminals and housing
Insulation resisitance50MΩ or more (500 VDC measured via megohmmeter) between terminals and housing
Vibration resistant10~150Hz, the lesser of 1.5mm full amplitude or 20m/s², 2 hours in each direction of xyz (without power)
Shock proof100m/ s² 3 times in each direction of XYZ (without electricity)
FluidAir, Non-corrosive gas, Non-flammable gas
Takeover diameterM5
Power supply voltage12 to 24 VDC ±10%, Ripple (p-p) 10% or less (With power supply polarity protection)
Current consumption40 mA or less
Repeat accurancy±0.2% F.S.±1 digit
Display3 1/2 digit, 7-segment indicator, 1-color display (Red)
Display accurancy±2% F.S. ±1 digit (at 25°C ±3°C ambient temperature)
Indicator lightLights up when output is turned ON. OUT1: Green; OUT2: Red
Lead wire with connector±2% F.S. (at 25°C in an operating range of -5 to 50°C)
Temperature characteristicsOilproof heavy-duty vinyl cable.5 cores, ∅3.5, 2 m, Conductor area: 0.15 mm2 (AWG26) Insulator O.D.: 1.0 mm
StandardsCE marking, RoHS, UL/ CSA

Internal Circuits and Wiring

Digital pressure switch wiring diagram of NPNDigital pressure switch wiring diagram of PNP

Dimension (mm)

Digital pressure switch dimension

Piping specification

ModelM5M5
Port sizeM5*0.8 (Side port)M5*0.8 (Rear ported)
Wetted part materialSensor pressure receiving areaSensor pressure receiving area: Silicon
Piping portC3604 (Electroless nickel plating)
O-ring: HNBR
WeightWith lead wire with connector (5 cores, 2m)55g
Without lead wire with connector15g

Tips: What is Digital Pressure Switch?

The digital pressure switch has a built-in precision pressure sensor, amplifies the pressure signal through a high-precision instrumentation amplifier, collects and processes data through a high-speed MCU, generally uses 4-digit LED real-time digital pressure display, relay signal output, and upper and lower limit control points can be freely set , small hysteresis, anti-vibration, fast response, stable and reliable, high precision (accuracy is generally ±0.5% F.S, high is ±0.2% F.S), the use of hysteresis setting can effectively protect the repeated action caused by pressure fluctuations, protection control The equipment is a high-precision equipment that detects pressure and liquid level signals and realizes pressure and liquid level monitoring and control.

Only registered users can write reviews