Digital Tuning Fork Density Meter for Liquids

$2,953.99
Buy digital tuning fork density meter online, this densitometer is used for measuring different liquids, including LiOH solution, sulfuric acid solution, lime slurry, NH3·nH2O, and urea ammonium nitrate solution, built-in temperature digital sensor, optional media temperature 0~100℃ or 0~150℃, different wetted material, high performance and high precision.
SKU: ATO-DENSITY-LI
*
*
*
*
*
*
Free Shipping

Factory price digital tuning fork density meter is mainly composed of a transmitter, a vibrating fork body and a temperature measuring element, which can be used for measuring LiOH solution, sulfuric acid solution, lime slurry, NH3·nH2O, and urea ammonium nitrate solution.

Specification

  • Model: ATO-APX301-LI
  • Measuring Medium (Optional): LiOH Solution, Sulfuric Acid Solution, Lime Slurry, NH3·nH2O, Urea Ammonium Nitrate Solution
  • Measuring Range: 0 – 2.5 g/cc (0 – 2500 kg/m3), 0~100.0%
  • Calibration Range: 0 – 2.5 g/cc (0 – 2500 kg/m3), 0~100.0%
  • Measurement Accuracy: ± 0.002 g/cc (± 2 kg/m3), ±0.5%
  • Repeatability: ± 0.001 g/cc (± 0.2 kg/m3) ±0.1%
  • Medium Temperature Range: -50℃ ~ +150℃
  • Working Pressure (Optional): 0.2~0.3MPa, Max. Pressure ≤4MPa
  • Fluid Viscosity Range: 0 – 600Cp
  • Media Temperature (Optional): 0~100℃, 0~150℃
  • Temperature Coefficient: <0.1 kg/m3/℃ (± 0.5%) After Correction
  • Stress Effect: Negligible
  • Built-in Temperature Sensor: Digital Sensor
  • Wetted Material (Optional): 316 Stainless Steel, 316 Stainless Steel + PTFE, 316 Stainless Steel +PFA, 2205 Stainless Steel, Hastelloy Alloy C276, Titanium Alloy
  • Electrical Connection (Optional): M20*1.5, G1/2, NPT1/2
  • Connection Type (Optional): G1/2” Thread, DN50 Flanged, DN80 Flanged, 1/2” Trip Clamp, 2” Trip Clamp
  • Fork Body Coating: Standard PTFE or PFA
  • Power Supply: 24VDC, ≥50mA
  • Analog Signal Output: 4-20mA, 0-1000Hz, RS485 Modbus, 4 Wires
  • Output Accuracy (20℃): ± 0.1% of reading or ± 0.05% FS
  • Output repeatability (-40~+85℃): ± 0.05% FS
  • Protection Level: IP65
  • Explosion-Proof: Ex d Ⅱ C T6 Gb
  • Shell: Aluminum Alloy

Dimensions (Unit: mm)

Denisty meter dimensions

Wiring diagram

denisty meter wiring diagragm

Tips: What are the factors that cause the measurement error of the tuning fork density meter?

  • Temperature: Temperature will affect the elastic modulus of the resonant element and other mechanical structures such as length and thickness changes.
  • Liquid flow: Due to the frictional force of liquid flow, the pipe wall is subjected to shear force, which will affect the change of resonance frequency.
  • Dirt pollution: If there is dirt inside, it will inevitably change the resonance period.
Product reviews
High accuracy and easy to use
5
Varg
Avatar
10/23/2023 6:51 PM
The digital tuning fork liquid density meter has really helped me with my lab work. High accuracy and easy to use.
Was this review helpful? Yes No (0/0)
0.001 g/cm³ density meter
5
Jakos
Avatar
12/2/2025 8:13 PM
I need a quote for a density meter capable of measuring as low as 0.001 g/cm³. This is for measuring an ether-based liquid solution.
Was this review helpful? Yes No (0/0)
ATO Responded
Sorry, our density meters only have a measurement accuracy of 0.002 g/cm³, which is below 0.001 g/cc.
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Factory price digital tuning fork density meter is mainly composed of a transmitter, a vibrating fork body and a temperature measuring element, which can be used for measuring LiOH solution, sulfuric acid solution, lime slurry, NH3·nH2O, and urea ammonium nitrate solution.

Specification

  • Model: ATO-APX301-LI
  • Measuring Medium (Optional): LiOH Solution, Sulfuric Acid Solution, Lime Slurry, NH3·nH2O, Urea Ammonium Nitrate Solution
  • Measuring Range: 0 – 2.5 g/cc (0 – 2500 kg/m3), 0~100.0%
  • Calibration Range: 0 – 2.5 g/cc (0 – 2500 kg/m3), 0~100.0%
  • Measurement Accuracy: ± 0.002 g/cc (± 2 kg/m3), ±0.5%
  • Repeatability: ± 0.001 g/cc (± 0.2 kg/m3) ±0.1%
  • Medium Temperature Range: -50℃ ~ +150℃
  • Working Pressure (Optional): 0.2~0.3MPa, Max. Pressure ≤4MPa
  • Fluid Viscosity Range: 0 – 600Cp
  • Media Temperature (Optional): 0~100℃, 0~150℃
  • Temperature Coefficient: <0.1 kg/m3/℃ (± 0.5%) After Correction
  • Stress Effect: Negligible
  • Built-in Temperature Sensor: Digital Sensor
  • Wetted Material (Optional): 316 Stainless Steel, 316 Stainless Steel + PTFE, 316 Stainless Steel +PFA, 2205 Stainless Steel, Hastelloy Alloy C276, Titanium Alloy
  • Electrical Connection (Optional): M20*1.5, G1/2, NPT1/2
  • Connection Type (Optional): G1/2” Thread, DN50 Flanged, DN80 Flanged, 1/2” Trip Clamp, 2” Trip Clamp
  • Fork Body Coating: Standard PTFE or PFA
  • Power Supply: 24VDC, ≥50mA
  • Analog Signal Output: 4-20mA, 0-1000Hz, RS485 Modbus, 4 Wires
  • Output Accuracy (20℃): ± 0.1% of reading or ± 0.05% FS
  • Output repeatability (-40~+85℃): ± 0.05% FS
  • Protection Level: IP65
  • Explosion-Proof: Ex d Ⅱ C T6 Gb
  • Shell: Aluminum Alloy

Dimensions (Unit: mm)

Denisty meter dimensions

Wiring diagram

denisty meter wiring diagragm

Tips: What are the factors that cause the measurement error of the tuning fork density meter?

  • Temperature: Temperature will affect the elastic modulus of the resonant element and other mechanical structures such as length and thickness changes.
  • Liquid flow: Due to the frictional force of liquid flow, the pipe wall is subjected to shear force, which will affect the change of resonance frequency.
  • Dirt pollution: If there is dirt inside, it will inevitably change the resonance period.
Product reviews
High accuracy and easy to use
5
Varg
Avatar
10/23/2023 6:51 PM
The digital tuning fork liquid density meter has really helped me with my lab work. High accuracy and easy to use.
Was this review helpful? Yes No (0/0)
0.001 g/cm³ density meter
5
Jakos
Avatar
12/2/2025 8:13 PM
I need a quote for a density meter capable of measuring as low as 0.001 g/cm³. This is for measuring an ether-based liquid solution.
Was this review helpful? Yes No (0/0)
ATO Responded
Sorry, our density meters only have a measurement accuracy of 0.002 g/cm³, which is below 0.001 g/cc.
Only registered users can write reviews