DC-DC Boost-Buck Converter, 18V-40V to 24V

$88.46
DC-DC boost-buck converter is step up and step down converter with wide input voltage range of 18V to 40V, output voltage 24V, moisture-proof and anti-shock protection, high efficiency up to 97.6%.
SKU: ATO-DCDC-183624
*
Free Shipping
Delivery date: 6-12 days

Cost-saving mini DC-DC boost-buck converter is adopted synchronous rectification technology, non-isolated between input and output, with short circuit, overload, over temperature protections.

Features

  • Wide input voltage range: 18V to 40V.
  • Brand-new, die-cast aluminum shell and high quality design, maximum transfer efficiency of 97%.
  • This non-isolated power module comes with waterproof lever of IP67, moisture-proof & anti-shock protection.
  • Auto-recovery when device is back to normal operating.
  • Built-in full protection against over/under voltage input, over-current, overload, over-temperature and short circuit.
  • Industry grade DC 18V-40V to 24V boost-buck converter, widely used in automotive, electricity, surveillance systems, railway signals, instruments, solar generate electricity, display screen of bus and taxi, car audio device, security systems, hospital equipment, telecommunications etc.

Specifications

ModelATOWG18-40S2420ATOWG18-40S2430
Absolute Maximum Ratings
Operating Ambient Temperature-40~50℃
Shell Ambient Temperature-40~80℃
Storage Temperature-55~100℃
Operating Humidity5~95% (Non-condensing)
Atmospheric Pressure62-106Kpa
Altitude4000m
Cooling WayNatural Cooling
Input Characteristics
Input Voltage18-40V (Typ. 24/36V)
Max. Input Voltage45V (Continuous)
Undervoltage Shutdown16.5-17.0V (Automatic Recovery)16.5-17.3V (Automatic Recovery)
Undervoltage Recovery17.5-18.5V (Automatic Recovery)17.8-18.3V (Automatic Recovery)
Max. Input Current27.6A (Vin=18V; Iout=20A)42.3A (Vin=18V; Iout=30A)
No Load Current130mA (Vin=24V)150mA (Vin=24V)
Positive Electrode Cable12 AWG (If the wire length is greater than 50cm, it is recommended to use a thicker wire diameter.)10 AWG (If the wire length is greater than 50cm, it is recommended to use a thicker wire diameter.)
Negative Electrode Cable
Enable Pin CableN/A
Fuse40A (Input positive has built-in fuse)60A (Input positive has built-in fuse)
Output Characteristics
Efficiency97.4% (Vin=24V; Iout=20A)97.6% (Vin=24V; Iout=30A)
Output Voltage23.8-24.4V (Vin=24V; Iout =20A)23.8-24.4V (Vin=24V; Iout =30A)
Regulator Accuracy±5%
Voltage Regulation±3%
Load Regulation±3%
Overvoltage Protection45.5-47.0V
Output Current0-20A0-30A
Overcurrent Protection21-24A (Vin=24V)30-33A (Vin=24V)
External CapacitanceμF (Don' t Need)
Output Ripple and Noise260mVp-p (Vin=18-40V; Iout=20A, Oscilloscope Bandwidth: 20 MHz)450mVp-p (Vin=18-40V; Iout=30A, Oscilloscope Bandwidth: 20 MHz)
Output Voltage Rise Time100mS450mS
Boot Delay Time150mS450mS
Out Voltage Overshoot5% (Vin=24V, 50%-75% Load Step)
Over Temperature Protection85℃ (Shell)
Short Circuit ProtectionYes (Long-term (4h) Short Circuit is Not Damaged, Hiccup Mode)
Positive Electrode Cable14 AWG (If the wire length is greater than 50cm, it is recommended to use a thicker wire diameter.)12 AWG (If the wire length is greater than 50cm, it is recommended to use a thicker wire diameter.)
Negative Electrode Cable
Safety and EMC Features
Anti-electric Strength
Input to OutputN/A
Input to Shell≥500V (Leakage Current ≤ 3.5mA, 1min, No Breakdown, No Arcing)
Output to Shell
Insulation Resistance
Input to Output≥50MΩ (Test Voltage=500V)
Input to Shell
Output to Shell
Other Characteristics  
WeightAbout 290gAbout 550g
PackageWhite Box
MTBF≥200000H
Switching Frequency150±10kHz


DC-DC Converter Model Selection

CodeModelPriceInput Voltage Range
Output VoltageOutput CurrentOutput PowerEfficiencySizeDownload
1ATOWG18-40S2420$78.4618-40V DC24V DC20 Amps480 Watts97.4%74*74*32mmATO PDF
2ATOWG18-40S2425$103.0718-40V DC24V DC25 Amps600 Watts97%100*80*39mmContact Us
3ATOWG18-40S2430$112.3018-40V DC24V DC30 Amps720 Watts97.6%100*80*39mmATO PDF

Note: The DC-DC boost converter models are all here, check the parameter carefully from the table and select the right converter power supply when place the order.

Tips: What is a DC-DC Buck-Boost Converter?

A DC-DC buck-boost converter is an electronic device that regulates voltage by either stepping it up (boost) or stepping it down (buck), depending on the input voltage level. It allows a stable output voltage to be maintained even when the input voltage fluctuates above or below the desired output. This makes it useful in applications like battery-powered systems, where the voltage may vary but a constant voltage is needed for the load.

Difference Between Buck and Boost Converter

DC DC buck and boost converters are essential components in modern electronics, each serving unique purposes in voltage regulation. By understanding the differences between these converters, you can choose the right one for your specific application needs, ensuring optimal performance and efficiency.

Setting Up The DC-DC Buck Converter 12V to 5V

In this video, we introduce the simple steps of operating ATO's 12V to 5V DC-DC Step-Down Converter and use a multimeter to confirm its performance of efficient power conversion.

DC-DC Boost Converter - Functional and Waterproof Test

Performing DC-DC converter functional tests ensures that the converter is functioning properly. The tests performed in this video include output voltage accuracy and water-proof functionality. By performing these tests, we can verify the output voltage accuracy and water-proof performance of the boost converter, ensuring that it provides precise voltage control and durability in every power conversion.

DC-DC Boost Converter Steps Up DC Voltage from 12V to 24V

In this guide, you will learn how to use an ATO boost converter to increase the DC voltage level from 12V to 24V, power a 24VDC vibration motor, and adjust its speed using a speed controller. By following these steps and understanding the operation of a 12V to 24V DC-DC boost converter, you can create functional systems for a variety of applications that require precise voltage control and motor speed regulation.

24V to 12V DC-DC Converter

In this video, we show how to use a DC-DC converter.

Product reviews
Fast shipping and works perfectly.
5
Vernon
Avatar
4/15/2022 1:30 AM
Well-made and puts out very accurate DC voltage. I used this DC-DC boost-buck converter to hook up 24VDC lights on my 24VDC Club Car. Simple to install and has done a great job. Super happy with this purchase. I would buy it again for the same purpose.
Was this review helpful? Yes No (0/0)
Regarding the cable
5
Monis
Avatar
11/12/2025 12:13 AM
I need a length of 400 mm. Also, is it possible to use a 4-core cable instead of 4 separate wires?
Was this review helpful? Yes No (0/0)
ATO Responded
The power cable cannot be replaced with a 4-core cable, but 40 cm long cables can be custom-made with a minimum order quantity of 50 pieces.
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Cost-saving mini DC-DC boost-buck converter is adopted synchronous rectification technology, non-isolated between input and output, with short circuit, overload, over temperature protections.

Features

  • Wide input voltage range: 18V to 40V.
  • Brand-new, die-cast aluminum shell and high quality design, maximum transfer efficiency of 97%.
  • This non-isolated power module comes with waterproof lever of IP67, moisture-proof & anti-shock protection.
  • Auto-recovery when device is back to normal operating.
  • Built-in full protection against over/under voltage input, over-current, overload, over-temperature and short circuit.
  • Industry grade DC 18V-40V to 24V boost-buck converter, widely used in automotive, electricity, surveillance systems, railway signals, instruments, solar generate electricity, display screen of bus and taxi, car audio device, security systems, hospital equipment, telecommunications etc.

Specifications

ModelATOWG18-40S2420ATOWG18-40S2430
Absolute Maximum Ratings
Operating Ambient Temperature-40~50℃
Shell Ambient Temperature-40~80℃
Storage Temperature-55~100℃
Operating Humidity5~95% (Non-condensing)
Atmospheric Pressure62-106Kpa
Altitude4000m
Cooling WayNatural Cooling
Input Characteristics
Input Voltage18-40V (Typ. 24/36V)
Max. Input Voltage45V (Continuous)
Undervoltage Shutdown16.5-17.0V (Automatic Recovery)16.5-17.3V (Automatic Recovery)
Undervoltage Recovery17.5-18.5V (Automatic Recovery)17.8-18.3V (Automatic Recovery)
Max. Input Current27.6A (Vin=18V; Iout=20A)42.3A (Vin=18V; Iout=30A)
No Load Current130mA (Vin=24V)150mA (Vin=24V)
Positive Electrode Cable12 AWG (If the wire length is greater than 50cm, it is recommended to use a thicker wire diameter.)10 AWG (If the wire length is greater than 50cm, it is recommended to use a thicker wire diameter.)
Negative Electrode Cable
Enable Pin CableN/A
Fuse40A (Input positive has built-in fuse)60A (Input positive has built-in fuse)
Output Characteristics
Efficiency97.4% (Vin=24V; Iout=20A)97.6% (Vin=24V; Iout=30A)
Output Voltage23.8-24.4V (Vin=24V; Iout =20A)23.8-24.4V (Vin=24V; Iout =30A)
Regulator Accuracy±5%
Voltage Regulation±3%
Load Regulation±3%
Overvoltage Protection45.5-47.0V
Output Current0-20A0-30A
Overcurrent Protection21-24A (Vin=24V)30-33A (Vin=24V)
External CapacitanceμF (Don' t Need)
Output Ripple and Noise260mVp-p (Vin=18-40V; Iout=20A, Oscilloscope Bandwidth: 20 MHz)450mVp-p (Vin=18-40V; Iout=30A, Oscilloscope Bandwidth: 20 MHz)
Output Voltage Rise Time100mS450mS
Boot Delay Time150mS450mS
Out Voltage Overshoot5% (Vin=24V, 50%-75% Load Step)
Over Temperature Protection85℃ (Shell)
Short Circuit ProtectionYes (Long-term (4h) Short Circuit is Not Damaged, Hiccup Mode)
Positive Electrode Cable14 AWG (If the wire length is greater than 50cm, it is recommended to use a thicker wire diameter.)12 AWG (If the wire length is greater than 50cm, it is recommended to use a thicker wire diameter.)
Negative Electrode Cable
Safety and EMC Features
Anti-electric Strength
Input to OutputN/A
Input to Shell≥500V (Leakage Current ≤ 3.5mA, 1min, No Breakdown, No Arcing)
Output to Shell
Insulation Resistance
Input to Output≥50MΩ (Test Voltage=500V)
Input to Shell
Output to Shell
Other Characteristics  
WeightAbout 290gAbout 550g
PackageWhite Box
MTBF≥200000H
Switching Frequency150±10kHz


DC-DC Converter Model Selection

CodeModelPriceInput Voltage Range
Output VoltageOutput CurrentOutput PowerEfficiencySizeDownload
1ATOWG18-40S2420$78.4618-40V DC24V DC20 Amps480 Watts97.4%74*74*32mmATO PDF
2ATOWG18-40S2425$103.0718-40V DC24V DC25 Amps600 Watts97%100*80*39mmContact Us
3ATOWG18-40S2430$112.3018-40V DC24V DC30 Amps720 Watts97.6%100*80*39mmATO PDF

Note: The DC-DC boost converter models are all here, check the parameter carefully from the table and select the right converter power supply when place the order.

Tips: What is a DC-DC Buck-Boost Converter?

A DC-DC buck-boost converter is an electronic device that regulates voltage by either stepping it up (boost) or stepping it down (buck), depending on the input voltage level. It allows a stable output voltage to be maintained even when the input voltage fluctuates above or below the desired output. This makes it useful in applications like battery-powered systems, where the voltage may vary but a constant voltage is needed for the load.

Product reviews
Fast shipping and works perfectly.
5
Vernon
Avatar
4/15/2022 1:30 AM
Well-made and puts out very accurate DC voltage. I used this DC-DC boost-buck converter to hook up 24VDC lights on my 24VDC Club Car. Simple to install and has done a great job. Super happy with this purchase. I would buy it again for the same purpose.
Was this review helpful? Yes No (0/0)
Regarding the cable
5
Monis
Avatar
11/12/2025 12:13 AM
I need a length of 400 mm. Also, is it possible to use a 4-core cable instead of 4 separate wires?
Was this review helpful? Yes No (0/0)
ATO Responded
The power cable cannot be replaced with a 4-core cable, but 40 cm long cables can be custom-made with a minimum order quantity of 50 pieces.
Only registered users can write reviews
Customers who bought this item also bought

DC-DC Buck Converter, 48V to 24V

ATO-DCDC-4824
$72.14
Affordable price 48V DC to 24V DC buck converter series for sales, step down voltage of 48 volt to 24 volt, with different models from 3 amps to 63 amps, 72 watts to 1500 watts, 35V-60V input voltage range, high efficiency up to 98%, IP68 for body.