Best DC-DC converter for sales. It adopts synchronous rectification technology, which is designed to step up 12V DC to 36V DC, with high efficiency 93%~96%, optimized for low-power applications.
Features
- Wide input voltage range: 10V to 25V.
- Brand-new, die-cast aluminum shell and high quality design, maximum transfer efficiency of 96%.
- This step up module comes with waterproof lever of IP67, moisture-proof & anti-shock protection.
- Auto-recovery when device is back to normal operating.
- Built-in full protection against over/under voltage input, over-current, overload, over-temperature and short circuit.
- Industry grade DC 12V to 36V boost converter, widely used in automotive, electricity, surveillance systems, railway signals, instruments, solar generate electricity, display screen of bus and taxi, car audio device, security systems, hospital equipment, telecommunications etc.
15A DC-DC Boost Converter Specification
| Model | ATOWG-12S3615 | ||||||||
| Input | Rated voltage | 12V | |||||||
| Voltage range | 10-25V | ||||||||
| Efficiency | 96% @ 12V input | ||||||||
| Output | Voltage | 36V | |||||||
| Max. rated current | 15A | ||||||||
| Max. rated power | 540W | ||||||||
| Voltage regulation | ±1% | ||||||||
| Load regulation | 2% | ||||||||
| No load loss | 70mA | ||||||||
| Ripple & noise | 200mV | ||||||||
| Environment | Working temperature | -40 ~ +80℃ | |||||||
| Working humidity | 10% ~ 90%RH | ||||||||
| Storage temperature | -40 ~ +100℃ | ||||||||
| Function | Short circuit protection | NO | |||||||
| Over current protection | YES | ||||||||
| Waterproof | IP67 | ||||||||
| Over temperature protection | YES | ||||||||
| Over voltage protection | YES | ||||||||
| Mechanical | Weight | 1500g | |||||||
| Size | 150*127*63mm | ||||||||
12V to 36V DC-DC Boost Converter Model Selection
Note: The series of 12Vto 36V DC-DC boost converter models are all here, check the parameter carefully from the table and select the right converter power supply when place the order.
Tips: How to reduce electromagnetic interference (EMI) in DC-DC step up converter?
To reduce electromagnetic interference (EMI) in the DC-DC step up module, you can start from the following aspects:
- Shielding and grounding: Use a metal shield to wrap the converter and ensure good grounding to reduce electromagnetic radiation.
- Layout and wiring: Optimize PCB layout, shorten the area of high-frequency switching loops, avoid current loops, and reduce electromagnetic radiation sources.
- Filter: Add LC filters at the input and output ends to suppress high-frequency noise.
- Switching frequency selection: Choose an appropriate switching frequency to avoid overlapping with the operating frequency of sensitive circuits or equipment.
- Soft switching technology: Use soft switching technology (such as zero-voltage switching or zero-current switching) to reduce switching losses and EMI.
- Damping network: Add a damping network at both ends of the inductor and capacitor to reduce the ringing effect.
Product reviews
DC-DC boost converter connection
Sanmantha
8/2/2021 2:32 AM
Can I connect two of your 12v to 36v DC boosters together to get a minimum of 40 amps? You list a 20 amp 12v to 36v booster. Can I connect the two of them together to get 40 amps?
Was this review helpful? (0/0)
Only registered users can write reviews
Customers who bought this item also bought
DC-DC Buck Converter, 12V/24V to 3.3V/5V/6V
ATO-DCDC-122405
$98.45
This series of DC-DC power converters are DC-DC buck converters with wide input range of 8V to 36V, high conversion efficiency up to 95%, is designed to step down the input rated voltage 12V/24V DC to 3.3V, 5V or 6V output voltage, and different models are available for selection.
DC-DC Boost-Buck Converter, 8-40V to 12V
ATO-DCDC-83612
$70.92
Low cost DC-DC boost-buck converter with wide input voltage range of 8V to 40V, step up and step down converter is designed to output voltage 12V, high efficiency up to 96%, optimized for low-power applications.