RGB Digital Color Mark Sensor, 7-13mm

$319.41
Low price RGB digital color mark sensor is for sale. Color mark sensor has two modes: 45μs ultra-high-speed color mark detection and high-precision color discrimination. It has an IP67 protection rating and an operating temperature range of -10~55℃, and is suitable for high-speed and high-precision color mark detection in packaging, electronics and other industries.
SKU: ATO-COLS-31
*
Free Shipping
Delivery date: 6-12 days

ATO RGB color mark sensor, equipped with ultra-high-speed color mark mode and high-precision color mode. It has a measuring range of 7-13mm, an protection class of IP67, an operating temperature of -10~55℃, and is equipped with short-circuit protection. The PVC wires are flame-retardant and wear-resistant. Digital color mark sensor can be accurately applied to detection scenarios such as color marks on packaging machine material belts and metal copper foil tapes, meeting the dual detection requirements of high speed and high precision.

Specification

ModelATO-FGS-31NATO-FGS-31P
Output ModeNPNPNP
Detect Distance7-13mm
Sensor TypeDiffuse reflection
Light Source TypeRGB Three-color light source
Light Spot Size1*5mm (at 10mm)
Power Supply Voltage12-24VDC
Power ConsumptionNormal mode: Below 750mW
ECO mode: Below 600mW
Teaching InputLow (ON): 0-2VDC
Output current: 0.5mA or less
Input impedance: approximately 10kΩ
High (OFF): 5V~+VDC or open
Response TimeColor mark mode: Below 45us
Color mode: Below 150us
Weight120g
Digital Display4-digit red LED display
Sensitivity Setting MethodColor mark mode: 2-point teaching/fully automatic teaching
Color mode: 1-point teaching
Protection ClassIP67 (IEC)
Environment TemperatureUse: -10~+55℃ (no condensation or frost allowed)
Storage: -20~+70℃
Environmental HumidityUse: 35~85% RH
Storage: 35~85% RH
Light-emitting ElementRed LED 640nm/Green LED 525nm/Blue LED 470nm
Cable0.2mm² core rubber cable, 2m
MaterialMain shell: PBT
Display cover: Polycarbonate
Buttons: Silicone-copper rubber
Lens: Glass


Features

  • Color mark mode: Color mark mode can automatically select R, G, B single-color LEDs to achieve an ultra-high-speed response of 45μs, suitable for high-speed detection.
  • Color mode: Color mode uses R, G, B three types of LEDs simultaneously, and can accurately distinguish the color of color marks through the RGB ratio of reflected light, which can effectively detect films with patterns and designs, etc.
  • Performance parameters: Measurement range 7~13mm; Protection class IP67; Operating temperature -10-55℃; Equipped with short-circuit protection; Using PVC wires, which are flame-retardant and wear-resistant.
  • Application scenarios: Digital color mark sensor can be used in various industrial detection scenarios such as color mark detection of packaging machine material belts, detection of adhesive tapes pasted on metal copper foils, etc.

Dimension (Unit: mm)

Color mark sensor dimension

Detail

Color mark sensor detail

Measurement Range

Color mark sensor measurement range

Wiring Method

Color mark sensor wiring method

Application

Color mark sensor application

Tips: What Differences Between Color Mark Mode and Color Mode in RGB Color Sensor?

When using RGB digital color mark sensors, understanding the differences between Color mark mode and color mode is key to leveraging their full potential. Let’s explore how these two modes vary and how to choose suitable mode in your business.

Color mark mode is designed for ultra-high-speed detection. It automatically selects one monochromatic LED (from R, G, or B) and achieves a rapid 45μs reaction time. With its best LED auto-selection feature, it’s ideal for fast-moving objects, such as color marks on packaging machine material belts, where speed is a top priority.

Color mode, in contrast, focuses on high-precision color discrimination. It uses all three R, G, and B LEDs simultaneously, analyzing the ratio of their reflected light. This allows it to accurately identify colors, even on patterned or complex surfaces like decorated films or tapes on metal copper foils.

To choose between them, go for color mark mode when you need blazing-fast response in high-speed production lines. Opt for color mode when precision in distinguishing colors, especially on intricate materials, is essential.

Product reviews
Accurate color mark sensor
5
Vito
Avatar
9/21/2026 3:06 AM
Using it on film with patterns, the RGB light does a great job telling similar colors apart. Quick to wire up with the NPN output. No missed marks since install. Would buy again if we need another one.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

ATO RGB color mark sensor, equipped with ultra-high-speed color mark mode and high-precision color mode. It has a measuring range of 7-13mm, an protection class of IP67, an operating temperature of -10~55℃, and is equipped with short-circuit protection. The PVC wires are flame-retardant and wear-resistant. Digital color mark sensor can be accurately applied to detection scenarios such as color marks on packaging machine material belts and metal copper foil tapes, meeting the dual detection requirements of high speed and high precision.

Specification

ModelATO-FGS-31NATO-FGS-31P
Output ModeNPNPNP
Detect Distance7-13mm
Sensor TypeDiffuse reflection
Light Source TypeRGB Three-color light source
Light Spot Size1*5mm (at 10mm)
Power Supply Voltage12-24VDC
Power ConsumptionNormal mode: Below 750mW
ECO mode: Below 600mW
Teaching InputLow (ON): 0-2VDC
Output current: 0.5mA or less
Input impedance: approximately 10kΩ
High (OFF): 5V~+VDC or open
Response TimeColor mark mode: Below 45us
Color mode: Below 150us
Weight120g
Digital Display4-digit red LED display
Sensitivity Setting MethodColor mark mode: 2-point teaching/fully automatic teaching
Color mode: 1-point teaching
Protection ClassIP67 (IEC)
Environment TemperatureUse: -10~+55℃ (no condensation or frost allowed)
Storage: -20~+70℃
Environmental HumidityUse: 35~85% RH
Storage: 35~85% RH
Light-emitting ElementRed LED 640nm/Green LED 525nm/Blue LED 470nm
Cable0.2mm² core rubber cable, 2m
MaterialMain shell: PBT
Display cover: Polycarbonate
Buttons: Silicone-copper rubber
Lens: Glass


Features

  • Color mark mode: Color mark mode can automatically select R, G, B single-color LEDs to achieve an ultra-high-speed response of 45μs, suitable for high-speed detection.
  • Color mode: Color mode uses R, G, B three types of LEDs simultaneously, and can accurately distinguish the color of color marks through the RGB ratio of reflected light, which can effectively detect films with patterns and designs, etc.
  • Performance parameters: Measurement range 7~13mm; Protection class IP67; Operating temperature -10-55℃; Equipped with short-circuit protection; Using PVC wires, which are flame-retardant and wear-resistant.
  • Application scenarios: Digital color mark sensor can be used in various industrial detection scenarios such as color mark detection of packaging machine material belts, detection of adhesive tapes pasted on metal copper foils, etc.

Dimension (Unit: mm)

Color mark sensor dimension

Detail

Color mark sensor detail

Measurement Range

Color mark sensor measurement range

Wiring Method

Color mark sensor wiring method

Application

Color mark sensor application

Tips: What Differences Between Color Mark Mode and Color Mode in RGB Color Sensor?

When using RGB digital color mark sensors, understanding the differences between Color mark mode and color mode is key to leveraging their full potential. Let’s explore how these two modes vary and how to choose suitable mode in your business.

Color mark mode is designed for ultra-high-speed detection. It automatically selects one monochromatic LED (from R, G, or B) and achieves a rapid 45μs reaction time. With its best LED auto-selection feature, it’s ideal for fast-moving objects, such as color marks on packaging machine material belts, where speed is a top priority.

Color mode, in contrast, focuses on high-precision color discrimination. It uses all three R, G, and B LEDs simultaneously, analyzing the ratio of their reflected light. This allows it to accurately identify colors, even on patterned or complex surfaces like decorated films or tapes on metal copper foils.

To choose between them, go for color mark mode when you need blazing-fast response in high-speed production lines. Opt for color mode when precision in distinguishing colors, especially on intricate materials, is essential.

Product reviews
Accurate color mark sensor
5
Vito
Avatar
9/21/2026 3:06 AM
Using it on film with patterns, the RGB light does a great job telling similar colors apart. Quick to wire up with the NPN output. No missed marks since install. Would buy again if we need another one.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews