Calcium sensor for water quality, with a measurement range of 0.2 to 40,000 ppm. This highly accurate water quality sensor works in temperatures from 0 to 50°C and pressures up to 2 atm. It’s sensitive, supports online monitoring, and is perfect for rivers, tap water, industrial wastewater, leachate, seawater, mining water, soil, and cement.
Specification
| Ion Concentration | |
| Measurement Range | 0.2~40000 ppm |
| Resolution | 0.01 ppm |
| Measurement Accuracy | ±3% FS |
| Temperature | |
| Measurement Range | -10.0 to 110.0 ℃ |
| Resolution | 0.1 ℃ |
| Measurement Accuracy | ±0.5 ℃ |
| Temperature Type | Thermistor NTC10K |
| Temperature Compensation | Automatic |
| Data Transmission | |
| Interface | RS-485 |
| Protocol | MODBUS-RTU communication protocol |
| Other Parameters | |
| Working Voltage | 9~27 VDC |
| Dielectric Strength | 2500 Vrms |
| Power Consumption | Approx. 0.5 W |
| Material | PPS Solid |
| Installation Method | 3/4 inch front and rear thread |
| Slope | 26±2 mV @ 25°C |
| Repeatability | ±2% |
| Interference Ion | Pb²⁺, Hg²⁺, Cu²⁺, Ni²⁺ |
| Pressure Range | 0~2 atm |
| Response Time | ≤30 seconds to reach 95% response |
| Storage | Long-term: dry storage; Short-term: store in calcium ion standard solution |
| Measurement Range | 0.2 ppm~40,000 ppm |
| pH Range | 3~10 pH |
| Output Impedance | 20~50 MΩ |
| Working Temperature | 0~50 ℃ |
| Maintenance & Cleaning | Clean with deionized water first, then rinse with calcium standard solution |
| Online Monitoring | Supported |
| Calibration Point | 1 ppm Ca²⁺ |
| Reference Electrode | Double junction, single liquid junction structure |
| Connector Type | Terminal |
| Applications | Rivers, tap water, industrial wastewater, leachate, seawater, mining water, soil, cement, biomedicine, environmental monitoring, fertilizers, calcium ion detection |
Feature

- High Precision Electrodes: The calcium sensor has highly accurate electrodes that do not require any trial solutions, preventing contamination and ensuring more stable and accurate data.
- Easy Installation: Equipped with a G3/4 pipe thread, the sensor is simple to install and helps reduce installation costs.
- RS485 Output: Supports RS485 signal output, making it compatible with various monitoring and control systems.
- Low Power Consumption: The ion sensor operates with a low power consumption of <0.5W, ensuring efficient use of energy.
- High-Quality Cable: The water quality sensor is designed with high-quality, low-noise cables (standard length 5m, customizable), ensuring stable data transmission.
Dimension (Unit: mm)
Wiring Instructions
| Function | Color | Description |
| Data Transmission | Yellow Wire | RS-485 Communication T/R+ (A) |
| White Wire | RS-485 Communication T/R− (B) | |
| Power Supply | Red Wire | DC Power Positive |
| Black Wire | DC Power Ground |
Application

Tips: How can I solve the problem of inaccurate or non-responsive measurement of the calcium sensor?
If the sensor appears to be measuring inaccurately or not responding at all, there are several things you can try:
- Check the sensor for contamination: Suspended matter, grease or other deposits in the water may affect the sensor's measurement accuracy. Wash the sensor with deionised water to ensure its surface is clean.
- Recalibrate: If measurements deviate from standard values, it may be necessary to recalibrate to ensure the sensor is adapted to the current water quality.
- Check power supply and connections: Ensure that the power supply to the sensor is stable and that there are no problems with the connection to the data logger or control system. A faulty connection may result in abnormal or unresponsive readings.
- Check electrode condition: After prolonged use, the electrodes may become worn or degraded, resulting in inaccurate measurements. Consider replacing the electrodes at this time.
Only registered users can write reviews