Cable Float Switch, SPDT, 110/ 220V

$58.15
Low price cable float switch is a level sensor with SPDT (NO + NC) contact form, AC 110V ~ 220V, 50/60 Hz, max. using temperature 60℃, ABS material, selectable or customizable cable length. This liquid float switch is used for water tank, sump pump and well pump.
SKU: ATO-HTM15-3
*
Free Shipping
Delivery date: 6-12 days

Full automatic cable float level switch can control water and drainage and prevent the water pump from dry burning, and it has good electrical properties and insulation.

Features

  • PVC cable: It is made from non-toxic and odor free PVC material that is soft but anti-rupture, which has long life span.
  • Resistant to high temperature and corrosion: Our cable float level switch can work at 0-65℃ temperature and adapt to certain harsh environments.
  • With working principle diagram: The working principle diagram is on the heavy hammer for convenient debugging and installation.

Specification

ModelATO-HTM15-3
Rated VoltageAC 110 ~ 220V
Contact FormSPDT (1NO + 1NC)
Cable Length2m (Default), 3m, 4m, 5m, 10m, 20m, 30m, Customizable
Max. CurrentAC 16 (4)A
Frequency50/60 Hz
Max. Using Temperature60℃
MaterialABS
Protection DegreeIP 68

Wiring Diagram

Auto-fill-water mode:

Cable Float Switch Auto-fill-water Mode

Auto-drainage and lack-water protection mode:

Cable Float Switch Auto-drainage and Lack-water-protection Mode

Dimensions (Units: mm)

Dimensions of Cable Float Switch

Tips: Working principle of float liquid level switch

Using the magnetic float of the float liquid level switch to rise or fall with the liquid level, the sensor can detect the action of the reed tube chip at the set position in the pipe, and send out the contact on (off) conversion signal.

In airtight nonmagnetic conductivity tube fitted with one or more of the dry reed pipe, then the tube through one or more hollow and internal ring magnets floating ball, rise or fall of liquids will drive the floating ball move up and down together, so that the nonmagnetic conductivity tube suction reed tube or disconnect, so as to output a switch signal.

In this video, ATO will show you top ten most used sensors (sensing technologies).

Product reviews
Durable construction
5
Keith
Avatar
4/11/2022 3:36 AM
I install this float switch on my water tank. It has durable construction, great wire and insulation. If the water in tank drops, the pump turns off and it opens the ball valve to fill the tank. Very convenient!
Was this review helpful? Yes No (0/0)
I am very satisfied with it
4
Wentty
Avatar
9/12/2024 7:44 PM
I recently installed the cable float switch in my residential sump pump system, and it has proven to be an good choice. The build quality of the float switch is robust and reliable. The cable is well-insulated and durable, handling the harsh conditions in the sump pit without any issues.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Full automatic cable float level switch can control water and drainage and prevent the water pump from dry burning, and it has good electrical properties and insulation.

Features

  • PVC cable: It is made from non-toxic and odor free PVC material that is soft but anti-rupture, which has long life span.
  • Resistant to high temperature and corrosion: Our cable float level switch can work at 0-65℃ temperature and adapt to certain harsh environments.
  • With working principle diagram: The working principle diagram is on the heavy hammer for convenient debugging and installation.

Specification

ModelATO-HTM15-3
Rated VoltageAC 110 ~ 220V
Contact FormSPDT (1NO + 1NC)
Cable Length2m (Default), 3m, 4m, 5m, 10m, 20m, 30m, Customizable
Max. CurrentAC 16 (4)A
Frequency50/60 Hz
Max. Using Temperature60℃
MaterialABS
Protection DegreeIP 68

Wiring Diagram

Auto-fill-water mode:

Cable Float Switch Auto-fill-water Mode

Auto-drainage and lack-water protection mode:

Cable Float Switch Auto-drainage and Lack-water-protection Mode

Dimensions (Units: mm)

Dimensions of Cable Float Switch

Tips: Working principle of float liquid level switch

Using the magnetic float of the float liquid level switch to rise or fall with the liquid level, the sensor can detect the action of the reed tube chip at the set position in the pipe, and send out the contact on (off) conversion signal.

In airtight nonmagnetic conductivity tube fitted with one or more of the dry reed pipe, then the tube through one or more hollow and internal ring magnets floating ball, rise or fall of liquids will drive the floating ball move up and down together, so that the nonmagnetic conductivity tube suction reed tube or disconnect, so as to output a switch signal.

Product reviews
Durable construction
5
Keith
Avatar
4/11/2022 3:36 AM
I install this float switch on my water tank. It has durable construction, great wire and insulation. If the water in tank drops, the pump turns off and it opens the ball valve to fill the tank. Very convenient!
Was this review helpful? Yes No (0/0)
I am very satisfied with it
4
Wentty
Avatar
9/12/2024 7:44 PM
I recently installed the cable float switch in my residential sump pump system, and it has proven to be an good choice. The build quality of the float switch is robust and reliable. The cable is well-insulated and durable, handling the harsh conditions in the sump pit without any issues.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews
Customers who bought this item also bought

3 hp (2.2 kW) VFD, Single Phase Input & Output

GK3000-1S0022
$379.23
Cheap 3 hp VFD, 1 phase for single phase AC induction motor, good variable speed performance, 220V - 240V 17 amps, manufacturer direct sale.

Digital Pressure Transducer 5 PSI/30 PSI/100 PSI/3000 PSI/8000 PSI

ATO-PRES-PX400
$197.78
Digital pressure transducer offers measuring ranges from -0.1 to 60 MPa, 0.5% FS accuracy, and optional 4–20mA or RS485 output. It supports gauge, absolute and sealed pressure measurement for air, water and oil applications.

1 inch Float Valve for Water Tank

ATO-FV-25
$122.69
1 inch (DN25) water tank float valve is designed to maintain a consistent water level in the tank, which helps prevent overflow and ensures there is always an adequate water supply. Reliable brass and stainless steel float valve, durable, low maintenance, and easy to install, good price.

1-1/2" Brass Vertical Check Valve

ATO-VCV-DN40
$54.52
Durable 1-1/2" brass non return valve, 40mm vertical check valve, working pressure 1.6Mpa and threaded connection, designed to use in water and air systems to prevent backflow and maintain fluid control.

2 Piece Stainless Steel Ball Valve, 1.5 Inch

ATO-BV-F120-15
$199.86
Sell 2 piece shut off stainless steel ball vavle, 1.5 inch, stainless steel 304 and 316 for selection, full port valve has good sealing performance, low fluid resistance, and easy to install and disassemble. Ball valves are widely used in chemical, paper, pharmaceutical, water conservancy, power and other industries.