Low cost Bluetooth wireless transmission module for electrical conductivity sensors, using 5V charging, can work for about 7 days with timed reading, and can transmit data within about 50 meters in an open and unobstructed area. The Bluetooth wireless transmission module for conductivity sensors is equipped with a pluggable connector, which can quickly replace the conductivity sensor, plug and play, and can be used for online monitoring and outdoor portable detection.
Specification
| Model | ATO-CS-MINI1 |
| Measuring Range | According to sensor settings |
| Output Mode | ASCII code Bluetooth transmission |
| Input Mode | Hexadecimal Bluetooth transmission |
| Transmission Distance | Open and unobstructed area, about 50 meters |
| Storage Capacity | 4M bytes |
| Working Time | About 7 days for regular reading |
| Power Supply | 3.7V/3000mAh polymer lithium battery, 5V charging |
| Note | The Bluetooth wireless transmission module cannot be immersed in water |
Features
- It can be connected to the conductivity sensor to achieve portable measurement, taking into account online real-time monitoring, and unlimited remote upper and lower limit control.
- It can be connected to mobile devices such as mobile phones and tablets through Bluetooth, WiFi, and 5G, and the data acquisition channels are diversified.
- The Bluetooth wireless transmission module for conductivity transducer adopts an intelligent software system, which can easily read various monitoring data.
- The Bluetooth wireless transmission module for conductivity sensor has a large storage space and can store up to 300,000 data.
- Equipped with a safe charging protection system, you can use a power bank, and charging is safe and convenient.
Dimension (Unit: mm)

Wiring
| Red line | Black line | Blue line | White line |
| Power line (12V) | Ground line (GND) | 485A | 485B |
Application

Tips: Notes on Bluetooth transmission module
- The Bluetooth transmission module should be kept away from water and sunlight during use and storage.
- Unplug the charger in time after the battery is fully charged to extend the battery life and reduce safety hazards.
- After each replacement of the conductivity sensor, read the address before performing other operations.
- Avoid direct mechanical stress (pressure, scratches, etc.) during use.
Only registered users can write reviews