Absolute Magnetic Scale Linear Encoder, 2+2mm

$261.19
ATO absolute magnetic linear encoder is specially designed for flexible wires, with magnetic spacing 2+2mm, optional 9-way D-type connector, 15-way D-type connector, or 26-way D-type connector. This non-contact magnetic scale linear encoder is mainly used in various automatic motion control scenarios.
SKU: ATO-IMLE-TMS512
*
*
Free Shipping
Delivery date: 6-12 days

This absolute magnetic linear encoder can provide accurate absolute physical position information without phase search 350ms after power-on. It is very stable and reliable due to its non-contact, wear-free measurement principle and built-in safety algorithm. The magnetic scale comprises an incremental code channel composed of a 2mm pole pitch and an absolute code channel composed of binary code. Therefore, during installation and use, the direction between the encoder and the encoder needs to be matched.

Features

  • The absolute magnetic linear encoder has a true dual-channel feedback system, which is suitable for high-speed, multi-motor pulley operation scenarios.
  • The magnetic scale encoding cycle is the same, and the length is 512mm.
  • During the magnetic scale crossing process, it can automatically switch between zero and absolute position information, and keep communication smooth. The detection blind area is very small.
  • The absolute magnetic strip encoder supports multiple communication protocols such as BISS-C, SSI, Tamagawa, RS-485, etc.
  • It adopts a widened appearance structure design and supports multiple specifications of magnetic scales with widths of 12mm, 15mm and 20mm.
  • The absolute magnetic linear encoder adopts IP67 grade epoxy resin potting process.

Specification

ModelATO-TMS512
Technical Parameters
Pole width2mm
Maximum measuring length482mm
Repeat accuracy<2μm
Unidirectional repeatability<1μm
Maximum speed5m/s
Electrical Parameters
Power supplyfrom 4.75V to 5.5V (on the connector), reverse polarity protection
Power consumption<250mA (5V power supply, 15m cable length, no load)
Setup Time After Power-On<350ms (after the setup time, the encoder will start responding according to the communication protocol)
Position delay<62.5μs
Position Data Communication interface (Optional)SSI/BISS-C/TAMA/RS485
Connector Type (Optional)9-way D-type connector (male)/15-way D-type connector (male)/26-way D-type connector (male)
Wiring MethodDirect lead output
Structural Parameters
MaterialEncoder: aluminum alloy
Weight125g (read head with 0.5m cable, DB9 connector)
Cable Parameters
Cable typeblack, PUR high bending cable, UL AWM identification, drag chain compatible, tinned braided shield, RoHS approved
Number of Wires8
Cable Outer Diameter5.0 +0.15mm
Wire AWGRed-grey, white-blue, brown-yellow, green-black 4x2x0.05mm2
Cable Bending RadiusFixed installation: 35mm, free movement: 69mm, continuous bending: 83mm
Cable Mass31g/m
Cable TorsionContinuous torsion is not allowed
Ambient Temperature Parameters
Operating Temperature-10°C~+55°C
Storage Temperature-20C~+ 85°C
Vibration (55Hz to 2000 Hz)300 m/s2 (iec60068-2-6: 2007)
Shock (11ms)300 m/s2 (iec60068-2-6: 2007)
Humidity100%RH (condensation allowed)
EMC Static ElectricityEN IEC 61000-6-2: 2019
EMC RadiationEN IEC 61000-6-4: 2019
Environmental SealingIP67 (according to IEC 60529: 1992+A2: 2013)
External Magnetic Field Allowed in Working State<1 mT

Connector Types

Absolute magnetic linear encoder connector types

Dimension (Unit: mm)

Absolute magnetic linear encoder dimension

Tips: How to choose an absolute magnetic linear encoder?

Choosing an absolute magnetic linear encoder involves considering several key factors. First, determine the required resolution and accuracy for your application. Evaluate the encoder's resolution, typically specified in micrometers or nanometers per unit of measurement. Next, assess the required length of travel and ensure the encoder can accommodate it. Consider the environmental conditions such as temperature, humidity, and exposure to contaminants, and choose an encoder with appropriate IP (Ingress Protection) ratings. Additionally, assess the speed and acceleration requirements of your application and select an encoder with suitable frequency response and dynamic performance. Consider the installation space and mounting options, ensuring compatibility with your system. Lastly, evaluate the cost and reliability of different encoder options, balancing performance requirements with budget constraints.

In this video, ATO will show you top ten most used sensors (sensing technologies).

Product reviews
Measuring Length
5
Coutard
Avatar
9/16/2025 9:15 PM
What about the ATO-TMS512 model? What is its maximum measuring length? What is its mounting clearance?
Was this review helpful? Yes No (0/0)
ATO Responded
This model ATO-TMS512 measures a maximum distance of 512mm, but has a 30mm blind spot. Please tell us what the maximum distance you would like to measure is.
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

This absolute magnetic linear encoder can provide accurate absolute physical position information without phase search 350ms after power-on. It is very stable and reliable due to its non-contact, wear-free measurement principle and built-in safety algorithm. The magnetic scale comprises an incremental code channel composed of a 2mm pole pitch and an absolute code channel composed of binary code. Therefore, during installation and use, the direction between the encoder and the encoder needs to be matched.

Features

  • The absolute magnetic linear encoder has a true dual-channel feedback system, which is suitable for high-speed, multi-motor pulley operation scenarios.
  • The magnetic scale encoding cycle is the same, and the length is 512mm.
  • During the magnetic scale crossing process, it can automatically switch between zero and absolute position information, and keep communication smooth. The detection blind area is very small.
  • The absolute magnetic strip encoder supports multiple communication protocols such as BISS-C, SSI, Tamagawa, RS-485, etc.
  • It adopts a widened appearance structure design and supports multiple specifications of magnetic scales with widths of 12mm, 15mm and 20mm.
  • The absolute magnetic linear encoder adopts IP67 grade epoxy resin potting process.

Specification

ModelATO-TMS512
Technical Parameters
Pole width2mm
Maximum measuring length482mm
Repeat accuracy<2μm
Unidirectional repeatability<1μm
Maximum speed5m/s
Electrical Parameters
Power supplyfrom 4.75V to 5.5V (on the connector), reverse polarity protection
Power consumption<250mA (5V power supply, 15m cable length, no load)
Setup Time After Power-On<350ms (after the setup time, the encoder will start responding according to the communication protocol)
Position delay<62.5μs
Position Data Communication interface (Optional)SSI/BISS-C/TAMA/RS485
Connector Type (Optional)9-way D-type connector (male)/15-way D-type connector (male)/26-way D-type connector (male)
Wiring MethodDirect lead output
Structural Parameters
MaterialEncoder: aluminum alloy
Weight125g (read head with 0.5m cable, DB9 connector)
Cable Parameters
Cable typeblack, PUR high bending cable, UL AWM identification, drag chain compatible, tinned braided shield, RoHS approved
Number of Wires8
Cable Outer Diameter5.0 +0.15mm
Wire AWGRed-grey, white-blue, brown-yellow, green-black 4x2x0.05mm2
Cable Bending RadiusFixed installation: 35mm, free movement: 69mm, continuous bending: 83mm
Cable Mass31g/m
Cable TorsionContinuous torsion is not allowed
Ambient Temperature Parameters
Operating Temperature-10°C~+55°C
Storage Temperature-20C~+ 85°C
Vibration (55Hz to 2000 Hz)300 m/s2 (iec60068-2-6: 2007)
Shock (11ms)300 m/s2 (iec60068-2-6: 2007)
Humidity100%RH (condensation allowed)
EMC Static ElectricityEN IEC 61000-6-2: 2019
EMC RadiationEN IEC 61000-6-4: 2019
Environmental SealingIP67 (according to IEC 60529: 1992+A2: 2013)
External Magnetic Field Allowed in Working State<1 mT

Connector Types

Absolute magnetic linear encoder connector types

Dimension (Unit: mm)

Absolute magnetic linear encoder dimension

Tips: How to choose an absolute magnetic linear encoder?

Choosing an absolute magnetic linear encoder involves considering several key factors. First, determine the required resolution and accuracy for your application. Evaluate the encoder's resolution, typically specified in micrometers or nanometers per unit of measurement. Next, assess the required length of travel and ensure the encoder can accommodate it. Consider the environmental conditions such as temperature, humidity, and exposure to contaminants, and choose an encoder with appropriate IP (Ingress Protection) ratings. Additionally, assess the speed and acceleration requirements of your application and select an encoder with suitable frequency response and dynamic performance. Consider the installation space and mounting options, ensuring compatibility with your system. Lastly, evaluate the cost and reliability of different encoder options, balancing performance requirements with budget constraints.

Product reviews
Measuring Length
5
Coutard
Avatar
9/16/2025 9:15 PM
What about the ATO-TMS512 model? What is its maximum measuring length? What is its mounting clearance?
Was this review helpful? Yes No (0/0)
ATO Responded
This model ATO-TMS512 measures a maximum distance of 512mm, but has a 30mm blind spot. Please tell us what the maximum distance you would like to measure is.
Only registered users can write reviews