3/4 HP 8 CFM/9 CFM Rotary Vane Vacuum Pump

$563.84
Affordable price 3/4 HP oil-flooded vacuum pump with 1-stage rotary vane design, offers 8 CFM or 9 CFM free air displacement with 5 Pa ultimate vacuum, low noise, high durability and efficiency, ideal for air conditioning, refrigeration and so on.
SKU: ATO-VP-RS4
*
Free Shipping
Delivery date: 6-12 days

Durable and efficient 3/4 hp vacuum pump features single-stage rotary vane design, delivering a high flow rating 8 CFM or 9 CFM flow and 5 Pa ultimate vacuum, good performance and long use life.

Features

  • Lightweight and durable aluminum alloy casing
  • Direct dirve motor with full copper wire structure, easy starting and strong construction
  • Non-slip top handle for portability
  • Built-in high-volume cooling fan to provide thermal protection and extend service life
  • Big oil sight glass for viewing oil level
  • Oil drain plug at the bottom of oil reservior for fast draining
  • Oil anti-back valve designto prevent oil from flowing back to pollute the pump system when the pump stops.
  • Large torque design makes the vacuum pump easy to startup, even under low temperature environment (5℃) or low voltage.

Applications: The 1-stage oil-sealed rotary vane vacuum pump is widely used for vacuum packaging, vacuum freezing, automobile maintenance, HVAC work, air conditioning, refrigeration and other vacuum evacuation.

Specification

ModelATO-RS-4
StructureSingle stage vacuum pump
Voltage110V 60Hz220V 50Hz
Free Air Displacement9 CFM8 CFM
Ultimate Vacuum5 Pa / 0.05 mbar
Rotating Speed1720 rpm1440 rpm
Power3/4 hp
Oil Capacity300 mL
Dimension360x135x270 mm
Weight19kg

Vacuum Pump Details

Rotary Vane Vacuum Pump Details Introduction

Tips: Troubleshooting Smoke and Oil Injection of Rotary Vane Vacuum Pump

It refers to smoke or oil injection of rotary vane vacuum pump at the air outlet during operation.

1. Smoke: if the pump has just started to operate, the smoke phenomenon is normal. If the smoke lasts for a long time, it is abnormal.
Solution: Check the air inlet of the vacuum pump, including pipe, valve, and container whether there needs repairing.

2. Oil injection indicates that there are a large number of leakage points outside the air inlet, or even the air inlet is exposed to the atmosphere.
Solution: Seal the air inlet of the pump to let it run, and if there is no spray oil, there is a leak point; check whether the exhaust valve disc is damaged, and if so, replace the broken exhaust valve disc.

Proposition 65 Warning

*WARNING: This product can expose you to chemicals, including lead, which is known to the State of California to cause birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Product reviews
Rotary vane vacuum pump can work efficiently
5
Ziani
Avatar
8/3/2021 8:32 PM
This rotary vane vacuum pump does an excellent job of pulling vacuum. I found that it works very efficiently and runs quietly, and it can pull out the vacuum in a few minutes.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Durable and efficient 3/4 hp vacuum pump features single-stage rotary vane design, delivering a high flow rating 8 CFM or 9 CFM flow and 5 Pa ultimate vacuum, good performance and long use life.

Features

  • Lightweight and durable aluminum alloy casing
  • Direct dirve motor with full copper wire structure, easy starting and strong construction
  • Non-slip top handle for portability
  • Built-in high-volume cooling fan to provide thermal protection and extend service life
  • Big oil sight glass for viewing oil level
  • Oil drain plug at the bottom of oil reservior for fast draining
  • Oil anti-back valve designto prevent oil from flowing back to pollute the pump system when the pump stops.
  • Large torque design makes the vacuum pump easy to startup, even under low temperature environment (5℃) or low voltage.

Applications: The 1-stage oil-sealed rotary vane vacuum pump is widely used for vacuum packaging, vacuum freezing, automobile maintenance, HVAC work, air conditioning, refrigeration and other vacuum evacuation.

Specification

ModelATO-RS-4
StructureSingle stage vacuum pump
Voltage110V 60Hz220V 50Hz
Free Air Displacement9 CFM8 CFM
Ultimate Vacuum5 Pa / 0.05 mbar
Rotating Speed1720 rpm1440 rpm
Power3/4 hp
Oil Capacity300 mL
Dimension360x135x270 mm
Weight19kg

Vacuum Pump Details

Rotary Vane Vacuum Pump Details Introduction

Tips: Troubleshooting Smoke and Oil Injection of Rotary Vane Vacuum Pump

It refers to smoke or oil injection of rotary vane vacuum pump at the air outlet during operation.

1. Smoke: if the pump has just started to operate, the smoke phenomenon is normal. If the smoke lasts for a long time, it is abnormal.
Solution: Check the air inlet of the vacuum pump, including pipe, valve, and container whether there needs repairing.

2. Oil injection indicates that there are a large number of leakage points outside the air inlet, or even the air inlet is exposed to the atmosphere.
Solution: Seal the air inlet of the pump to let it run, and if there is no spray oil, there is a leak point; check whether the exhaust valve disc is damaged, and if so, replace the broken exhaust valve disc.

Product reviews
Rotary vane vacuum pump can work efficiently
5
Ziani
Avatar
8/3/2021 8:32 PM
This rotary vane vacuum pump does an excellent job of pulling vacuum. I found that it works very efficiently and runs quietly, and it can pull out the vacuum in a few minutes.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews