730W 2000 rpm Brushless AC Servo Motor

$398.34
Brushless design 730W AC servo motor for sale, rated speed of 2000 rpm, maximum speed up to 2500 rpm, 3.5 Nm rated torque and peak torque up to 10.5 Nm, low noise and vibration when rotating. Reasonable price industrial servo motor, manufacturer direct sale.
SKU: ATO-SERVO-80S730AC
*
*
*
*
Free Shipping
Delivery date: 6-12 days

High precision 730 watt AC brushless servo motor with lower cost, 2000 rpm speed, 3.5 Nm rated torque, single phase or three phase 220V AC voltage, available in a 80mm square flange size.

Specification

BasicsModelATO80ST-M03520
Matched Drive ModelATOMG-1000 (Click it to the product page)
Square Flange Size80 mm
Rated Power730 W
Rated Voltagesingle phase or three phase 220V AC
Rated Current3 A
Rated Speed2000 rpm
Rated Torque3.5 Nm
Peak Torque10.5 Nm
Weight4 Kg
Length179 mm
Technical ParametersVoltage Constant71 V/ 1000r/ min
Torque Coefficient1.17 N.m/ A
Torque Inertia2.63 x 10-4 Kg.M2
Line-Line Resistance3.65 Ω
Line-Line Inductance8.8 mH
Electrical Time-Constant2.4 ms
Incremental Encoder Line Number2500 PPR
Absolute Encoder17 bit, 23 bit (Tamagawa brand)
Insulation ClassClass B
Safety ClassIP65
EnvironmentTemperature-20℃ ~ +40℃
Humidity<90%RH, (no dewing)

Dimension (unit: mm)

80mm 730w ac servo motor size

L (without brake): 179mm, L (with brake): 233mm

Details

730W AC Servo Motor Details

Winding and Encoder Connection

1. For servo motor winding

Motor Winding PlugIncremental Encoder LineU (Red)V (Yellow)W (Blue)PE (Yellow-Green)
Absolute Encoder LinePE (Yellow-Green)U (Red)V (Blue)W (Yellow)
Socket Number1234

2. For incremental encoder

Incremental Encoder Socket (15 Pin)Signal Definition5V0VBZ-UZU-AVWV-A-B-W-PE
Socket Number234567891011121314151

3. For absolute encoder

Absolute Encoder Socket (7 Pin)Signal DefinitionE-E+SD-0VSD+5VPE
Socket Number2345671

This video briefly shows the application of the ATO servo system in a linear slide.

ATO servo motor has 40mm to 180mm different square flange size, power rating from 50W to 7.5kW and speed range from 1000 rpm to 3000 rpm. so you can select the best one for your applications. In this video, ATO will show you servo motor linear actuator system for robotics.

In this video we've guided you through how to do VFD control wiring with a self-lock push button switch to run the motor in forward direction. We've covered everything from wiring to programming and even a test run. So just watch it through and hope you'll find it informative and helpful.

How to unlock the servo drive timing lock?

In this video, the process of unlocking the servo drive timing lock is demonstrated.

How to Connect the Servo Motor Controller and Set the JOG Mode?

The video shows the basic connection of the ATO servo motor kit and how to initialize the servo drive and how to set the JOG mode.

How to Use the Position Control Method of the Servo Motor(through PLC Pulse Control)?

The video introduces the connection and control (position control method) between PLC and ATO servo motor system.

Product reviews
Servo motor related information
5
Rnova
Avatar
9/16/2021 8:55 PM
If the power were to disconnect and the position of the motor were to be adjusted, would the motor know exactly where it is when the power came back on?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, if this servo motor is equipped with an absolute encoder, then the motor will know exactly where it is when the power comes back on.
See specs, price, and you can order online by credit card at: https://www.ato.com/200w-high-precision-ac-servo-motor
Free shipping.
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

High precision 730 watt AC brushless servo motor with lower cost, 2000 rpm speed, 3.5 Nm rated torque, single phase or three phase 220V AC voltage, available in a 80mm square flange size.

Specification

BasicsModelATO80ST-M03520
Matched Drive ModelATOMG-1000 (Click it to the product page)
Square Flange Size80 mm
Rated Power730 W
Rated Voltagesingle phase or three phase 220V AC
Rated Current3 A
Rated Speed2000 rpm
Rated Torque3.5 Nm
Peak Torque10.5 Nm
Weight4 Kg
Length179 mm
Technical ParametersVoltage Constant71 V/ 1000r/ min
Torque Coefficient1.17 N.m/ A
Torque Inertia2.63 x 10-4 Kg.M2
Line-Line Resistance3.65 Ω
Line-Line Inductance8.8 mH
Electrical Time-Constant2.4 ms
Incremental Encoder Line Number2500 PPR
Absolute Encoder17 bit, 23 bit (Tamagawa brand)
Insulation ClassClass B
Safety ClassIP65
EnvironmentTemperature-20℃ ~ +40℃
Humidity<90%RH, (no dewing)

Dimension (unit: mm)

80mm 730w ac servo motor size

L (without brake): 179mm, L (with brake): 233mm

Details

730W AC Servo Motor Details

Winding and Encoder Connection

1. For servo motor winding

Motor Winding PlugIncremental Encoder LineU (Red)V (Yellow)W (Blue)PE (Yellow-Green)
Absolute Encoder LinePE (Yellow-Green)U (Red)V (Blue)W (Yellow)
Socket Number1234

2. For incremental encoder

Incremental Encoder Socket (15 Pin)Signal Definition5V0VBZ-UZU-AVWV-A-B-W-PE
Socket Number234567891011121314151

3. For absolute encoder

Absolute Encoder Socket (7 Pin)Signal DefinitionE-E+SD-0VSD+5VPE
Socket Number2345671
Product reviews
Servo motor related information
5
Rnova
Avatar
9/16/2021 8:55 PM
If the power were to disconnect and the position of the motor were to be adjusted, would the motor know exactly where it is when the power came back on?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, if this servo motor is equipped with an absolute encoder, then the motor will know exactly where it is when the power comes back on.
See specs, price, and you can order online by credit card at: https://www.ato.com/200w-high-precision-ac-servo-motor
Free shipping.
Only registered users can write reviews
Customers who bought this item also bought

AC Servo Drive for ATO Servo Motor

ATO-MG1000
$371.23
AC servo motor drive, 220V single phase or three phase input, 380V three phase input, is a great fit for applications requiring position, speed, and torque control methods. All the power rating range from 50w to 8.6kw of our ATO brushless AC servo motors will work perfectly with this type of servo drive.