7.5 hp Horizontal Centrifugal Pump, Single Stage

$2,381.98
Single stage centrifugal pump with 5.5 kW motor power, horizontal structure, centrifugal water pump has maximum flow 7.8 m³/ h (34.3 gpm), maximum head 72m (236ft) and same diameter of inlet and outlet 40mm(1~1/ 2 inch). 3 phase centrifugal pump can be used for garden sprinkler irrigation, HVAC & refrigeration water circulation, etc.
SKU: ATO-HCP-5500W
*
*
Ship to
*
*
Shipping Method
Name
Estimated Delivery
Price
No shipping options
Delivery date: 6-12 days

Centrifugal water pump has maximum has optional input voltage AC 230V/ 240V/ 380V/ 440V to 480V and optional input frequency 50Hz/ 60Hz. Horizontal centrifugal pump has 0°, 90° and 180° installation angle of outlet.

Features:

  1. The centrifugal pump has the horizontal structure. The diameter of the inlet and outlet are the same. If a protective cover is added, it can be used in the open air.
  2. It is easy to install and maintain. No need to dismantle pipeline system, just lifting off the conjunction flat nut of vertical pump. Then all the rotor parts can be taken out.
  3. Horizontal centrifugal pump can be operating in series and parallel connection according to the requirements of flow and head.
  4. The installation angle of pump outlet can be 0°, 90° and 180° to meet different connection occasions.

Specification

  • Model: ATO-HCP-40-250B
  • Power: 7.5 hp (5.5 kW)
  • Number of stages: Single stage
  • Motor Speed: 2900rpm
  • Input voltage: AC 220V, 230V, 240V, 380V, 400V, 415V, 440V, 460V, 480V
  • Input frequency: 50Hz/ 60Hz
  • Inlet diameter: 40mm (1-1/ 2 inch)
  • Outlet diameter: 40mm (1-1/ 2 inch)
  • Flow (min. flow to max. flow): 3.8 m³/ h (16.7gpm American system), 5.5 m³/ h (24.2gpm American system), 7.0 m³/ h (30.8gpm American system)
  • Head (max. head to min. head): 61.5m (202ft), 60m (197ft), 56m (184ft)
  • Efficiency: 23%/ 27%/ 26%
  • Nominal diameter of impeller: 250mm
  • Size: 465*640*330mm
  • Weight: 125kg

Dimension (mm)

Boundary dimensionhHLaA
2604655758055
Base dimensionL1BIbh14-φd1
420330370230804-φ14
Flange dimensionDD1n-φd
φ150φ1104-φ18

Horizontal centrifugal pump dimension

Tips: Operation Steps of Centrifugal Pump Start Up.

After completing preparations, the centrifugal pump can be started. After starting, when the pump speed is stable, check the pressure and current, and pay attention to the vibration and noise. When the ammeter pointer swings to the specified position, the cock of the vacuum gauge and the pressure gauge can be opened, and the outlet valve must be slowly opened, and the water pump starts to have the normal operation. At the same time, the valve of the sealing water pipe should be opened.
The idle running time after the start of the centrifugal pump should not be too long, usually limited to 2 to 4 minutes. If the time is too long, the temperature of the water will rise, which may cause cavitation or other adverse consequences.

Phase3 phase
Input voltageAC 220V, 230V, 240V, 380V, 400V, 415V, 440V, 460V, 480V
Input frequency50Hz, 60Hz
Installation angle of outlet0°, 90° and 180°
Pump typeBooster pump
Number of stagesSingle stage
Motor typeY/ Y2 series motor
Motor speed2900rpm
Impeller material304/ 316 stainless steel
Seal material304 stainless steel, tungsten carbide, fluorine rubber
Inlet max. pressure1MPa (145 psi)
(NPSH)r2.3m
UsageWater, or liquids compatible with pump component materials.
1. The volume of solid particles should be less than 0.1% in unit volume, and the granularity should be less than 0.2mm.
2. The temperature should be lower than 60℃.
EnvironmentTemperature: <40℃, humidity: <95%, altitude<1000m
Warranty12 months

Different types of centrifugal pumps

This video explains different types of centrifugal pumps that can be selected according to one's own needs.

Principles and functionality explained

This video tells us what a centrifugal pump is and its working principle, and you will have a general understanding of it.

Components of centrifugal pumps

This video is an explanation of the components of a centrifugal pump, and we can learn the basic knowledge of the eight components of a centrifugal pump from it.

Proposition 65 Warning

*WARNING: This product can expose you to chemicals, including lead, which is known to the State of California to cause birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Product reviews
Powerful Pump
4
Elainee
Avatar
6/14/2024 3:35 AM
When I received the product, it felt heavy. The quality should be good. I wonder if the horizontal centrifugal pump can be used for freshwater treatment? I have some fish in the pond at home, mainly for viewing.
Was this review helpful? Yes No (0/0)
ATO Responded
The 7.5 hp horizontal centrifugal pump is a centrifugal pump that can pump fresh water.
Some questions about pump
5
Jeppard
Avatar
8/20/2024 12:09 AM
What is the head lift on this pump I'm going 30' in the air through an 2" pipe for firefighting It'll be carrying water. Also, will it trip out if it can't expel all the water at once. It's on a spray system.
Was this review helpful? Yes No (0/0)
ATO Responded
1. This pump has different heads for different flow rates, for example, the rated flow rate is 7.8 m³/h (18gpm), and the maximum head is 65m.
2. Yes, for the sprinkler system, if it cannot expel all the water at once, it will trip out. Usually in the sprinkler application system, there will be a control cabinet to automatically control the pressure of the sprinkler system.
When the upper pressure limit is reached, the pump automatically stops and when the pressure is maintained at a certain level and the pressure is reduced to a certain level, the pump automatically starts.
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Centrifugal water pump has maximum has optional input voltage AC 230V/ 240V/ 380V/ 440V to 480V and optional input frequency 50Hz/ 60Hz. Horizontal centrifugal pump has 0°, 90° and 180° installation angle of outlet.

Features:

  1. The centrifugal pump has the horizontal structure. The diameter of the inlet and outlet are the same. If a protective cover is added, it can be used in the open air.
  2. It is easy to install and maintain. No need to dismantle pipeline system, just lifting off the conjunction flat nut of vertical pump. Then all the rotor parts can be taken out.
  3. Horizontal centrifugal pump can be operating in series and parallel connection according to the requirements of flow and head.
  4. The installation angle of pump outlet can be 0°, 90° and 180° to meet different connection occasions.

Specification

  • Model: ATO-HCP-40-250B
  • Power: 7.5 hp (5.5 kW)
  • Number of stages: Single stage
  • Motor Speed: 2900rpm
  • Input voltage: AC 220V, 230V, 240V, 380V, 400V, 415V, 440V, 460V, 480V
  • Input frequency: 50Hz/ 60Hz
  • Inlet diameter: 40mm (1-1/ 2 inch)
  • Outlet diameter: 40mm (1-1/ 2 inch)
  • Flow (min. flow to max. flow): 3.8 m³/ h (16.7gpm American system), 5.5 m³/ h (24.2gpm American system), 7.0 m³/ h (30.8gpm American system)
  • Head (max. head to min. head): 61.5m (202ft), 60m (197ft), 56m (184ft)
  • Efficiency: 23%/ 27%/ 26%
  • Nominal diameter of impeller: 250mm
  • Size: 465*640*330mm
  • Weight: 125kg

Dimension (mm)

Boundary dimensionhHLaA
2604655758055
Base dimensionL1BIbh14-φd1
420330370230804-φ14
Flange dimensionDD1n-φd
φ150φ1104-φ18

Horizontal centrifugal pump dimension

Tips: Operation Steps of Centrifugal Pump Start Up.

After completing preparations, the centrifugal pump can be started. After starting, when the pump speed is stable, check the pressure and current, and pay attention to the vibration and noise. When the ammeter pointer swings to the specified position, the cock of the vacuum gauge and the pressure gauge can be opened, and the outlet valve must be slowly opened, and the water pump starts to have the normal operation. At the same time, the valve of the sealing water pipe should be opened.
The idle running time after the start of the centrifugal pump should not be too long, usually limited to 2 to 4 minutes. If the time is too long, the temperature of the water will rise, which may cause cavitation or other adverse consequences.

Product reviews
Powerful Pump
4
Elainee
Avatar
6/14/2024 3:35 AM
When I received the product, it felt heavy. The quality should be good. I wonder if the horizontal centrifugal pump can be used for freshwater treatment? I have some fish in the pond at home, mainly for viewing.
Was this review helpful? Yes No (0/0)
ATO Responded
The 7.5 hp horizontal centrifugal pump is a centrifugal pump that can pump fresh water.
Some questions about pump
5
Jeppard
Avatar
8/20/2024 12:09 AM
What is the head lift on this pump I'm going 30' in the air through an 2" pipe for firefighting It'll be carrying water. Also, will it trip out if it can't expel all the water at once. It's on a spray system.
Was this review helpful? Yes No (0/0)
ATO Responded
1. This pump has different heads for different flow rates, for example, the rated flow rate is 7.8 m³/h (18gpm), and the maximum head is 65m.
2. Yes, for the sprinkler system, if it cannot expel all the water at once, it will trip out. Usually in the sprinkler application system, there will be a control cabinet to automatically control the pressure of the sprinkler system.
When the upper pressure limit is reached, the pump automatically stops and when the pressure is maintained at a certain level and the pressure is reduced to a certain level, the pump automatically starts.
Only registered users can write reviews