ATO 07: 1 air booster with high pressure, pneumatic power, air driven fuel and oil-free. Formula to calculate gas outlet pressure PB is 7Pa+ Pi, connection: gas inlet / gas outlet PT thread 3/8".
Features:
- Compressed air driven - no electricity required (connect to normal air compressor). ln order to extend the lifetime of the pump, the driving air pressure should not be higher than 8 bar.
- No airline lubricator required.
- Hydrocarbon free - separation between air and gas sections.
- Wide range of models with different ratios.
- Built-in-cooling on most models.
Specification:
| Mode | ATO-DGD-7 |
| Pressure boost ratio | 7:1 |
| Min. gas Inlet pressure PA | 3 bar |
| Max.gas Inlet pressure PA | 56 bar |
| Max. gas outlet pressure PB | 56 bar |
| Drive piston diameter | 160mm |
| Driven air pressure PL | 2 bar- 8 bar |
| Max. driving air pressure | 10 bar |
| Formula to calculate gas outlet pressure PB | 7PL+PA |
| Connection: Gas Inlet / Gas outlet (PT thread) | PT 3/8" (Default PT thread, please contact us if NPT thread is required) |
| Driven Airinlet Port | G 1/2" (Default G thread, please contact us if NPT thread is required) |
| Max. flow at driven air pressure of 6 bar | 556 L/min |
| Weight | 25kg |
Dimension: (unit:mm)

Details

Tips: Where are ATO air pressure booster application scenarios?
- Pressure test with gas transfer and filling.
(Ar/ He/ H2/ O2/ N2ICO2/ NO2/ CH4/ C2H2/ LNG/ ILPG/ CNG/ FM200/ SF6/ H2S etc.) - Charging of gas cylinder and accumulator with nitrogen.
- Supply for isolating gas systems.
- Gas assisted injection molding.
- Transfer of oxygen cylinders.
- Charging of breathing air bottles.
Product reviews
solid and works fine
John
3/21/2022 7:19 PM
Good product. I used it many times and there is not a single problem. Highly recommend this to anyone needs a high pressure air pump. Good customer service. It's worth the money.
Was this review helpful? (0/0)
Regarding air pressure booster
Chiles
9/26/2025 2:32 AM
I need an air pressure booster. Medium: Air with a purity of up to 99%, free of water and oil. For areas requiring compressed air, the flow rate is lower, between 10 and 100 liters/minute.
Was this review helpful? (0/0)
Only registered users can write reviews