Adjustable DC power supply designed for stable and flexible power control, with independent voltage and current adjustment via potentiometers. Features 3½-digit digital metering, forced-air cooling, and comprehensive protection against overload, short circuits, overvoltage, and overheating.
Specification
| Model | ATO-JK10060K |
| Input Voltage | Single Phase 110V or 220V AC (±10%) |
| Input Frequency | 50/60 Hz |
| Output Voltage | DC 0–100V |
| Output Current | 0–60A |
| Output Power | 6000 W |
| Power Supply Stability | ≤0.5% + 10 mV |
| Load Regulation | ≤0.5% + 30 mV |
| Ripple | ≤1% + 10 mV RMS |
| Voltage Display | 3½-digit digital meter; Accuracy: ±0.5% FS + 1 digit (10%–100% of rated value); Display range: 00.0–100.0V |
| Current Display | 3½-digit digital meter; Accuracy: ±0.5% FS + 1 digit (10%–100% of rated value); Display range: 00.0–60.0A |
| Insulation Resistance | Input-Output: ≥20 MΩ; Input-Case: ≥20 MΩ; Output-Case: ≥80 MΩ |
| Dielectric Strength | Input-Output: AC 1500V, 10mA, 1 minute; Input-Case: AC 1500V, 10mA, 1 minute; Output-Case: AC 1500V, 10mA, 1 minute |
| Overvoltage Protection | Built-in OVP; protection threshold: rated output voltage +5% |
| Overcurrent Protection | Constant-current output under overload and short-circuit conditions |
| Overtemperature Protection | Built-in OTP; protection threshold: 85°C ±5°C (heatsink temperature) |
| Voltage and Current Adjustment | Potentiometer |
| Output Polarity | Positive (+) and negative (-) outputs can be grounded independently |
| Cooling Method | Forced-Air Cooling |
| Operating Environment | Indoor use; Temperature: -10°C–60°C; Humidity: 10%–85% RH |
| Storage Environment | Temperature: -20–70°C; Humidity: 10%–90% RH |
| Size | 430 (L) x 450 (W) x 180 (H) mm |
| Weight | 28kg |
Note: All values are typical and may vary under different load conditions or operating circumstances. Accuracy is measured under load-side voltage sensing conditions. Deviations from rated values may occur due to temperature variations and component aging.
Feature
- High-Power DC Output: The 6000W power supply provides stable and reliable DC power for demanding electronic equipment, testing systems, laboratory setups, and other high-power applications.
- Independent Voltage & Current Adjustment: Separate controls allow you to fine-tune the output voltage and current according to different load and testing requirements.
- Automatic CV/CC Mode: Automatically switches between constant voltage (CV) and constant current (CC) operation to maintain regulated output as load conditions change.
- Stable, Low-Ripple Output: Delivers clean and consistent DC power with low ripple, making the unit suitable for sensitive electronic circuits and precision testing applications.
- Built-In Protection: Overvoltage, overcurrent, short-circuit, and overtemperature protection help safeguard the power supply and connected equipment during abnormal operating conditions.
- Digital Monitoring: The adjustable DC power supply features 3½-digit digital meters for clear, real-time monitoring of output voltage and current.
Detail
Front

Back

Size (unit: mm)

Tips: How Do I Set Voltage and Current on a 6000W Variable DC Power Supply?
Before connecting the load, check the equipment's rated voltage and maximum current requirements. Set the output voltage according to the load specification, then adjust the current limit based on its operating requirements. For this 6000W variable DC power supply, make sure the selected settings stay within the 100V maximum voltage and 60A maximum current ratings. For sensitive electronics, verify the output polarity and monitor the digital voltage and current readings during initial power-up.